{"title":"Comparative Analysis of Temperature Field and Stress Field of TC4 Ti-tanium Alloy Joint Between CMT and MIG Welding","authors":"Rui Zhang, X. Gu, Yuxian Meng, Lijuan Zhu","doi":"10.5755/j02.mech.31491","DOIUrl":null,"url":null,"abstract":"A model was used for the cold metal transfer (CMT) welding based on the volume heat flux distribution of double ellipsoids loaded with time intervals. The temperature field and stress field of TC4 titanium alloy were numerically simulated by ANSYS software. The distribution laws of temperature, residual stress and post-weld deformation during CMT and MIG welding were studied and compared. It was found that the maximum temperature of the molten pool in CMT welding was fluctuating and rising during the loading process, while the temperature of the molten pool in MIG welding was rising smoothly and the maximum temperature was higher than that in CMT welding. The welding stress field was analyzed by thermal-stress coupling analysis. The stress distribution simulated based on the MIG welding heat source was similar to CMT welding, but the maximum von Mises stress was greater than that of CMT welding. Due to the cooling shrinkage, both of them would produce angular deformation after welding. And the maximum angular deformation simulated based on the MIG welding heat source was greater than that of CMT welding. It was proved by welding simulation that CMT welding could reduce welding heat input and residual stress and deformation after welding.","PeriodicalId":54741,"journal":{"name":"Mechanika","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2022-12-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanika","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.5755/j02.mech.31491","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 1
Abstract
A model was used for the cold metal transfer (CMT) welding based on the volume heat flux distribution of double ellipsoids loaded with time intervals. The temperature field and stress field of TC4 titanium alloy were numerically simulated by ANSYS software. The distribution laws of temperature, residual stress and post-weld deformation during CMT and MIG welding were studied and compared. It was found that the maximum temperature of the molten pool in CMT welding was fluctuating and rising during the loading process, while the temperature of the molten pool in MIG welding was rising smoothly and the maximum temperature was higher than that in CMT welding. The welding stress field was analyzed by thermal-stress coupling analysis. The stress distribution simulated based on the MIG welding heat source was similar to CMT welding, but the maximum von Mises stress was greater than that of CMT welding. Due to the cooling shrinkage, both of them would produce angular deformation after welding. And the maximum angular deformation simulated based on the MIG welding heat source was greater than that of CMT welding. It was proved by welding simulation that CMT welding could reduce welding heat input and residual stress and deformation after welding.
期刊介绍：
The journal is publishing scientific papers dealing with the following problems:
Mechanics of Solid Bodies;
Mechanics of Fluids and Gases;
Dynamics of Mechanical Systems;
Design and Optimization of Mechanical Systems;
Mechanical Technologies.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
