Evaluation of the Flexural Performance of the Mono and Hybrid FRP Strengthened RC Beams: Static and Cyclic Loads

IF 0.6 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materiale Plastice Pub Date : 2023-07-03 DOI:10.37358/mp.23.2.5664
Jaisankar Karthick, K. Suguna, Pulipakka Narasimha Rao Raghunath
{"title":"Evaluation of the Flexural Performance of the Mono and Hybrid FRP Strengthened RC Beams: Static and Cyclic Loads","authors":"Jaisankar Karthick, K. Suguna, Pulipakka Narasimha Rao Raghunath","doi":"10.37358/mp.23.2.5664","DOIUrl":null,"url":null,"abstract":"\nThe flexural response of externally strengthened RC beams with GFRP and HFRP (hybrid FRP) sheets under monotonic and cyclic loading conditions are investigated. Fourteen beams in two series (Series1and 2) were cast for this study. Each series consisted of seven beams. A total number of 14 beams were cast, out of which 2 beams considered as control specimen. The 12 beams were externally strengthened with GFRP sheets (4 beams) and HFRP sheets (8 beams). Series 1 and Series 2 beams were tested for two-point static and cyclic loads. The experimental for ultimate strength, deformation, stiffness, ductility, energy absorption and modes of failures are conversed for all the tested beams. The peak load for the RC beams tested specimens under static loads were computed using ACI 440.2R-08 guidelines. An optimum increase of 171.43 % in ultimate load carrying capacity was found for the beam strengthened with HFRP sheets than the control beam. Also, the predicted ultimate loads exhibited the good convergence with the test results.\n","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2023-07-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materiale Plastice","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.37358/mp.23.2.5664","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The flexural response of externally strengthened RC beams with GFRP and HFRP (hybrid FRP) sheets under monotonic and cyclic loading conditions are investigated. Fourteen beams in two series (Series1and 2) were cast for this study. Each series consisted of seven beams. A total number of 14 beams were cast, out of which 2 beams considered as control specimen. The 12 beams were externally strengthened with GFRP sheets (4 beams) and HFRP sheets (8 beams). Series 1 and Series 2 beams were tested for two-point static and cyclic loads. The experimental for ultimate strength, deformation, stiffness, ductility, energy absorption and modes of failures are conversed for all the tested beams. The peak load for the RC beams tested specimens under static loads were computed using ACI 440.2R-08 guidelines. An optimum increase of 171.43 % in ultimate load carrying capacity was found for the beam strengthened with HFRP sheets than the control beam. Also, the predicted ultimate loads exhibited the good convergence with the test results.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
单一和混合FRP增强RC梁的抗弯性能评价:静荷载和循环荷载
研究了GFRP和HFRP(混合FRP板)外加固RC梁在单调和循环加载条件下的抗弯响应。本研究共浇铸了两个系列(系列1和系列2)14根梁。每个系列由七个横梁组成。共浇筑14根梁,其中2根梁作为对照试件。12根梁外部分别用GFRP板(4根梁)和HFRP板(8根梁)加固。系列1和系列2梁进行了两点静荷载和循环荷载试验。对所有试验梁的极限强度、变形、刚度、延性、能量吸收和破坏模式进行了换算。试件在静荷载作用下的峰值荷载采用ACI 440.2R-08准则计算。HFRP加固梁的极限承载力比对照梁提高了171.43%。预测的极限荷载与试验结果具有较好的收敛性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materiale Plastice
Materiale Plastice MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
1.40
自引率
25.00%
发文量
99
审稿时长
6-12 weeks
期刊介绍: Materiale Plastice, abbreviated as Mater. Plast., publishes original scientific papers or guest reviews on topics of great interest. The Journal does not publish memos, technical reports or non-original papers (that are a compiling of literature data) or papers that have been already published in other national or foreign Journal.
期刊最新文献
Experimental Analysis of Hyperelastic Materials Using the Vibration Method Impact of Aligned Carbon Nanotubes on the Mechanical Properties and Sensing Performance of EVA/CNTs Composites Influence of Biphasic Calcium Phosphate Incorporation Into Alginate Matrices In vitro Comparison of the Efficiency of Celluloid and Metallic Matrices in Proximal Restorations with a Bulk Polymer-based Biomaterial The Influence of the Delamination Location on the Bending Behavior of E-Glass Fiber EWR Flat Plates
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1