Preparation of activated carbon from sunflower straw through H3PO4 activation and its application for acid fuchsin dye adsorption

IF 3.7 Q1 WATER RESOURCES Water science and engineering Pub Date : 2023-06-01 DOI:10.1016/j.wse.2023.02.002
Wen-de Zhao , Li-ping Chen , Yan Jiao
{"title":"Preparation of activated carbon from sunflower straw through H3PO4 activation and its application for acid fuchsin dye adsorption","authors":"Wen-de Zhao ,&nbsp;Li-ping Chen ,&nbsp;Yan Jiao","doi":"10.1016/j.wse.2023.02.002","DOIUrl":null,"url":null,"abstract":"<div><p>With the development circular economy, the use of agricultural waste to prepare biomass materials to remove pollutants has become a research hotspot. In this study, sunflower straw activated carbon (SSAC) was prepared by the one-step activation method, with sunflower straw (SS) used as the raw material and H<sub>3</sub>PO<sub>4</sub> used as the activator. Four types of SSAC were prepared with impregnation ratios (weight of SS to weight of H<sub>3</sub>PO<sub>4</sub>) of 1:1, 1:2, 1:3, and 1:5, corresponding to SSAC1, SSAC2, SSAC3, and SSAC4, respectively. The adsorption process of acid fuchsin (AF) in water using the four types of SSAC was studied. The results showed that the impregnation ratio significantly affected the structure of the materials. The increase in the impregnation ratio increased the specific surface area and pore volume of SSAC and improved the adsorption capacity of AF. However, an impregnation ratio that was too large led to a decrease in specific surface area. SSAC3, with an impregnation ratio of 1:3, had the largest specific surface area (1 794.01 m<sup>2</sup>/g), and SSAC4, with an impregnation ratio of 1:5, exhibited the smallest microporosity (0.052 7 cm<sup>3</sup>/g) and the largest pore volume (2.549 cm<sup>3</sup>/g). The adsorption kinetics of AF using the four types of SSAC agreed with the quasi-second-order adsorption kinetic model. The Langmuir isotherm model was suitable to describe SSAC3 and SSAC4, and the Freundlich isotherm model was appropriate to describe SSAC1 and SSAC2. The result of thermodynamics showed that the adsorption process was spontaneous and endothermic. At 303 K, SSAC4 showed a removal rate of 97.73% for 200-mg/L AF with a maximum adsorption capacity of 2 763.36 mg/g, the highest among the four types of SSAC. This study showed that SAAC prepared by the H<sub>3</sub>PO<sub>4</sub>-based one-step activation method is a green and efficient carbon material and has significant application potential for the treatment of dye-containing wastewater.</p></div>","PeriodicalId":23628,"journal":{"name":"Water science and engineering","volume":"16 2","pages":"Pages 192-202"},"PeriodicalIF":3.7000,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Water science and engineering","FirstCategoryId":"1087","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1674237023000315","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"WATER RESOURCES","Score":null,"Total":0}
引用次数: 6

Abstract

With the development circular economy, the use of agricultural waste to prepare biomass materials to remove pollutants has become a research hotspot. In this study, sunflower straw activated carbon (SSAC) was prepared by the one-step activation method, with sunflower straw (SS) used as the raw material and H3PO4 used as the activator. Four types of SSAC were prepared with impregnation ratios (weight of SS to weight of H3PO4) of 1:1, 1:2, 1:3, and 1:5, corresponding to SSAC1, SSAC2, SSAC3, and SSAC4, respectively. The adsorption process of acid fuchsin (AF) in water using the four types of SSAC was studied. The results showed that the impregnation ratio significantly affected the structure of the materials. The increase in the impregnation ratio increased the specific surface area and pore volume of SSAC and improved the adsorption capacity of AF. However, an impregnation ratio that was too large led to a decrease in specific surface area. SSAC3, with an impregnation ratio of 1:3, had the largest specific surface area (1 794.01 m2/g), and SSAC4, with an impregnation ratio of 1:5, exhibited the smallest microporosity (0.052 7 cm3/g) and the largest pore volume (2.549 cm3/g). The adsorption kinetics of AF using the four types of SSAC agreed with the quasi-second-order adsorption kinetic model. The Langmuir isotherm model was suitable to describe SSAC3 and SSAC4, and the Freundlich isotherm model was appropriate to describe SSAC1 and SSAC2. The result of thermodynamics showed that the adsorption process was spontaneous and endothermic. At 303 K, SSAC4 showed a removal rate of 97.73% for 200-mg/L AF with a maximum adsorption capacity of 2 763.36 mg/g, the highest among the four types of SSAC. This study showed that SAAC prepared by the H3PO4-based one-step activation method is a green and efficient carbon material and has significant application potential for the treatment of dye-containing wastewater.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
H3PO4活化向日葵秸秆制备活性炭及其在酸性品红染料吸附中的应用
随着循环经济的发展,利用农业废弃物制备生物质材料去除污染物已成为研究热点。本研究以向日葵秸秆(SS)为原料,以H3PO4为活化剂,采用一步活化法制备了向日葵秸秆活性炭(SSAC)。以浸渍比(SS质量与H3PO4质量)为1:1、1:2、1:3、1:5制备四种SSAC,分别对应SSAC1、SSAC2、SSAC3、SSAC4。研究了四种SSAC对水中酸性品红的吸附过程。结果表明,浸渍率对材料的结构有显著影响。浸渍比的增大增大了SSAC的比表面积和孔体积,提高了AF的吸附能力,但浸渍比过大则会导致SSAC的比表面积下降。浸渍比为1:3的SSAC3比表面积最大,为1 794.01 m2/g;浸渍比为1:5的SSAC4微孔隙率最小,为0.0527 cm3/g,孔隙体积最大,为2.549 cm3/g。四种SSAC对AF的吸附动力学均符合准二级吸附动力学模型。Langmuir等温线模型适合描述SSAC3和SSAC4, Freundlich等温线模型适合描述SSAC1和SSAC2。热力学结果表明,吸附过程是自发的吸热过程。在303 K下,SSAC4对200 mg/L AF的去除率为97.73%,最大吸附量为2 763.36 mg/g,是4种SSAC中最高的。本研究表明,以h3po4为基础一步活化法制备的SAAC是一种绿色高效的碳材料,在处理含染料废水方面具有重要的应用潜力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
6.60
自引率
5.00%
发文量
573
审稿时长
50 weeks
期刊介绍: Water Science and Engineering journal is an international, peer-reviewed research publication covering new concepts, theories, methods, and techniques related to water issues. The journal aims to publish research that helps advance the theoretical and practical understanding of water resources, aquatic environment, aquatic ecology, and water engineering, with emphases placed on the innovation and applicability of science and technology in large-scale hydropower project construction, large river and lake regulation, inter-basin water transfer, hydroelectric energy development, ecological restoration, the development of new materials, and sustainable utilization of water resources.
期刊最新文献
A missing data processing method for dam deformation monitoring data using spatiotemporal clustering and support vector machine model Perspectives on risk analysis and control for real-time operation of flood control systems Microbial community diversity during algal inhibition using slow-release microcapsules of tea polyphenols Hydrological responses to permafrost degradation on Tibetan Plateau under changing climate A novel approach for quantifying upper reservoir leakage
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1