Drawbar Performance of Tractor Tyres with Steel Spikes At 100%-Wheel Slip

IF 1.3 Q2 AGRICULTURE, MULTIDISCIPLINARY Acta Technologica Agriculturae Pub Date : 2022-06-01 DOI:10.2478/ata-2022-0016
R. Abrahám, Tomáš Zubčák, R. Majdan, K. Kollárová, Eva Matejková, S. Masarovicová, R. Drlička
{"title":"Drawbar Performance of Tractor Tyres with Steel Spikes At 100%-Wheel Slip","authors":"R. Abrahám, Tomáš Zubčák, R. Majdan, K. Kollárová, Eva Matejková, S. Masarovicová, R. Drlička","doi":"10.2478/ata-2022-0016","DOIUrl":null,"url":null,"abstract":"Abstract A driving wheel is a part of a tractor, which transmits forces from a tyre to the ground. Therefore, it affects the tractor movement and the pulling of an implement. The paper is aimed at a tractive performance evaluation of special driving wheels based on drawbar pull at 100%-slip. These wheels consist of steel spikes to be applied in the base or working position. The design is characterized by the spikes placed in a tyre-tread pattern. The rubber lugs of the tyre are higher than spikes, therefore, they are not in contact with the ground in the base position. The spikes in the working position exceed the tyre diameter to be in contact with the ground. Tests were performed on a grass plot at a relatively low soil moisture. The spike tyres were compared with the standard tyres using a sub-compact tractor. An increase in drawbar pull reached a statistically significant value of 15.9% in the 2nd gear and 16.7% in the 1st gear.","PeriodicalId":43089,"journal":{"name":"Acta Technologica Agriculturae","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Technologica Agriculturae","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2478/ata-2022-0016","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"AGRICULTURE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 1

Abstract

Abstract A driving wheel is a part of a tractor, which transmits forces from a tyre to the ground. Therefore, it affects the tractor movement and the pulling of an implement. The paper is aimed at a tractive performance evaluation of special driving wheels based on drawbar pull at 100%-slip. These wheels consist of steel spikes to be applied in the base or working position. The design is characterized by the spikes placed in a tyre-tread pattern. The rubber lugs of the tyre are higher than spikes, therefore, they are not in contact with the ground in the base position. The spikes in the working position exceed the tyre diameter to be in contact with the ground. Tests were performed on a grass plot at a relatively low soil moisture. The spike tyres were compared with the standard tyres using a sub-compact tractor. An increase in drawbar pull reached a statistically significant value of 15.9% in the 2nd gear and 16.7% in the 1st gear.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
带钢钉的拖拉机轮胎在100%车轮打滑时的牵伸性能
摘要驱动轮是拖拉机的一部分,它将力从轮胎传递到地面。因此,它会影响拖拉机的运动和机具的拉动。本文旨在基于牵引杆在100%滑移时的牵引力来评估特种驱动轮的牵引性能。这些轮子由钢钉组成,用于底座或工作位置。该设计的特点是将尖刺放置在轮胎胎面花纹中。轮胎的橡胶凸耳高于尖刺,因此,它们在基本位置不与地面接触。工作位置的尖刺超过了与地面接触的轮胎直径。试验是在土壤湿度相对较低的草地上进行的。使用小型拖拉机将尖刺轮胎与标准轮胎进行了比较。牵引杆拉力的增加在2档和1档分别达到15.9%和16.7%的统计显著值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Acta Technologica Agriculturae
Acta Technologica Agriculturae AGRICULTURE, MULTIDISCIPLINARY-
CiteScore
2.50
自引率
28.60%
发文量
32
审稿时长
18 weeks
期刊介绍: Acta Technologica Agriculturae is an international scientific double-blind peer reviewed journal focused on agricultural engineering. The journal is multidisciplinary and publishes original research and review papers in engineering, agricultural and biological sciences, and materials science. Aims and Scope Areas of interest include but are not limited to: agricultural and biosystems engineering; machines and mechanization of agricultural production; information and electrical technologies; agro-product and food processing engineering; physical, chemical and biological changes in the soil caused by tillage and field traffic, soil working machinery and terramechanics; renewable energy sources and bioenergy; rural buildings; related issues from applied physics and chemistry, ecology, economy and energy.
期刊最新文献
Sustainable Bioproduct Production via Anaerobic Bioconversion by Landfill Soil Inoculum in Various Carbohydrate Wastes Impact of Machinery Passages on Soil Compaction in Field Conditions Identification of Armyworm-Infected Leaves in Corn by Image Processing and Deep Learning Evaluation of Service Brake Braking of Selected Group of Vehicles Depending on Wear of Brake System‘s Parts Optimisation and Modelling of Soil Pulverisation Index Using Response Surface Methodology for Disk Harrow Under Different Operational Conditions
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1