{"title":"Enhanced mechanical properties of molybdenum-coated aluminium via laser cladding","authors":"Qiuju Zheng, Tian Chen, Hongbo Li","doi":"10.1080/02670844.2023.2191400","DOIUrl":null,"url":null,"abstract":"ABSTRACT High-quality molybdenum coating has been successfully deposited on the pure aluminium substrate by high-velocity oxygen fuel spraying and subsequent laser remelting and laser cladding process. The microstructure, bonding strength, micro-hardness and wear resistance of the coating were systematically investigated. Results showed that the obtained coating exhibits a good metallurgical bonding interface as well as a dense microstructure with Al8Mo3, AlMo3 and Al5Mo phases, which results in the significant improvement of the mechanical properties of the coating. The bonding strength is increased from 11 ± 1 to 57 ± 4 MPa after laser treatment. Micro-hardness of the coating (480 ± 30 HV) is observed to be increased by about 70% in comparison with the as-sprayed coating (281 ± 8 HV). The wear resistance of the Mo coating was also increased about five to six times by the laser remelting and cladding process.","PeriodicalId":21995,"journal":{"name":"Surface Engineering","volume":"39 1","pages":"56 - 64"},"PeriodicalIF":2.4000,"publicationDate":"2023-01-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Surface Engineering","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/02670844.2023.2191400","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, COATINGS & FILMS","Score":null,"Total":0}
引用次数: 0
Abstract
ABSTRACT High-quality molybdenum coating has been successfully deposited on the pure aluminium substrate by high-velocity oxygen fuel spraying and subsequent laser remelting and laser cladding process. The microstructure, bonding strength, micro-hardness and wear resistance of the coating were systematically investigated. Results showed that the obtained coating exhibits a good metallurgical bonding interface as well as a dense microstructure with Al8Mo3, AlMo3 and Al5Mo phases, which results in the significant improvement of the mechanical properties of the coating. The bonding strength is increased from 11 ± 1 to 57 ± 4 MPa after laser treatment. Micro-hardness of the coating (480 ± 30 HV) is observed to be increased by about 70% in comparison with the as-sprayed coating (281 ± 8 HV). The wear resistance of the Mo coating was also increased about five to six times by the laser remelting and cladding process.
期刊介绍：
Surface Engineering provides a forum for the publication of refereed material on both the theory and practice of this important enabling technology, embracing science, technology and engineering. Coverage includes design, surface modification technologies and process control, and the characterisation and properties of the final system or component, including quality control and non-destructive examination.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
