Effect of different conditions on pervaporation dehydration in CA/NYL66 blend membrane

IF 0.8 4区 工程技术 Q4 ENGINEERING, CHEMICAL Membrane Water Treatment Pub Date : 2019-11-01 DOI:10.12989/MWT.2019.10.6.441
A. Kazemzadeh, S. Mousavi, J. Mehrzad, A. Motavalizadehkakhky, M. Hosseiny
{"title":"Effect of different conditions on pervaporation dehydration in CA/NYL66 blend membrane","authors":"A. Kazemzadeh, S. Mousavi, J. Mehrzad, A. Motavalizadehkakhky, M. Hosseiny","doi":"10.12989/MWT.2019.10.6.441","DOIUrl":null,"url":null,"abstract":"In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost 7-25 micrometre), feed concentration (70- 95 wt.% isopropanol), and feed temperature (30-60 C) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA) . The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature 30 C, and high membrane thickness 24.62 micrometre. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were 24.62 micrometre, 40 C, and 70 wt.%, respectively.","PeriodicalId":18416,"journal":{"name":"Membrane Water Treatment","volume":"10 1","pages":"441-449"},"PeriodicalIF":0.8000,"publicationDate":"2019-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Membrane Water Treatment","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.12989/MWT.2019.10.6.441","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 1

Abstract

In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost 7-25 micrometre), feed concentration (70- 95 wt.% isopropanol), and feed temperature (30-60 C) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA) . The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature 30 C, and high membrane thickness 24.62 micrometre. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were 24.62 micrometre, 40 C, and 70 wt.%, respectively.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
不同条件对CA/NYL66共混膜渗透蒸发脱水的影响
采用溶剂蒸发法制备了不同厚度的醋酸纤维素(CA)/尼龙66(NYL66)(95/5)共混膜。研究了膜厚度(约7-25微米)、进料浓度(70-95wt%异丙醇)和进料温度(30-60℃)对膜分离异丙醇-水混合物性能的影响。关于吸附实验的结果,发现进料温度的增加增强了整体吸附,而通过增加进料浓度,整体吸附在70 wt.%异丙醇(IPA)下达到最大值。在高异丙醇浓度95重量%、低进料温度30℃和高膜厚度24.62微米的条件下获得最佳分离因子3080.51。关于渗透蒸发分离指数,所获得的结果表明,膜厚度、进料温度和进料中异丙醇浓度的合适值分别为24.62微米、40℃和70重量%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Membrane Water Treatment
Membrane Water Treatment ENGINEERING, CHEMICAL-WATER RESOURCES
CiteScore
1.90
自引率
30.00%
发文量
0
审稿时长
>12 weeks
期刊介绍: The Membrane and Water Treatment(MWT), An International Journal, aims at opening an access to the valuable source of technical information and providing an excellent publication channel for the global community of researchers in Membrane and Water Treatment related area. Specific emphasis of the journal may include but not limited to; the engineering and scientific aspects of understanding the basic mechanisms and applying membranes for water and waste water treatment, such as transport phenomena, surface characteristics, fouling, scaling, desalination, membrane bioreactors, water reuse, and system optimization.
期刊最新文献
Modeling of biofilm growth and the related changes in hydraulic properties of porous media fMWNTs/GO/MnO2 nanocomposites as additives in a membrane for the removal of crystal violet Prioritizing water distribution pipe renewal based on seismic risk and construction cost Comparison of pollutants in stormwater runoff from asphalt and concrete roads Application of graphene, graphene oxide, and boron nitride nanosheets in the water treatment
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1