Numerical Prediction Of The Streamwise Fluidelastic Instability

IF 1 4区 工程技术 Q4 ENGINEERING, MECHANICAL Journal of Pressure Vessel Technology-Transactions of the Asme Pub Date : 2023-07-07 DOI:10.1115/1.4062918
Sameer Abdul Rehman, S. El Bouzidi, O. Elbanhawy, Marwan Hassan, D. Weaver
{"title":"Numerical Prediction Of The Streamwise Fluidelastic Instability","authors":"Sameer Abdul Rehman, S. El Bouzidi, O. Elbanhawy, Marwan Hassan, D. Weaver","doi":"10.1115/1.4062918","DOIUrl":null,"url":null,"abstract":"\n Recent experimental investigations have shown that tube arrays can become unstable in the streamwise direction. This is contrary to the long-held notion that fluidelastic instability is only a concern in the direction transverse to the flow. The possibility of the streamwise fluidelastic instability (FEI) as a potential threat to the integrity of tube bundles was confirmed by the recent failures of newly installed replacement steam generators. A number of investigations were conducted to uncover the nature of this mechanism. A theoretical framework was developed by Hassan and Weaver (2016) to model streamwise fluidelastic instability in a bundle of flexible tubes. The model utilized a simple time lag expression for the flow channel area perturbation. The current work aims at developing a numerical model to precisely predict the flow perturbation characteristics in a tube bundle due to streamwise tube motion. Flow simulations were carried out for single phase fluid flow in a parallel triangle tube bundle array with 1.2, 1.5 and 1.7 pitch to diameter ratios. The numerical model was validated against numerical and experimental results available in the FEI literature. Simulations were carried out for a range of reduced flow velocities. The model results showed that the upstream flow perturbation magnitude and phase are different from those obtained in the downstream of the moving tube. The obtained flow perturbation characteristics were implemented in the Hassan and Weaver (2016) model and the streamwise FEI threshold was predicted.","PeriodicalId":50080,"journal":{"name":"Journal of Pressure Vessel Technology-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":1.0000,"publicationDate":"2023-07-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Pressure Vessel Technology-Transactions of the Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4062918","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Recent experimental investigations have shown that tube arrays can become unstable in the streamwise direction. This is contrary to the long-held notion that fluidelastic instability is only a concern in the direction transverse to the flow. The possibility of the streamwise fluidelastic instability (FEI) as a potential threat to the integrity of tube bundles was confirmed by the recent failures of newly installed replacement steam generators. A number of investigations were conducted to uncover the nature of this mechanism. A theoretical framework was developed by Hassan and Weaver (2016) to model streamwise fluidelastic instability in a bundle of flexible tubes. The model utilized a simple time lag expression for the flow channel area perturbation. The current work aims at developing a numerical model to precisely predict the flow perturbation characteristics in a tube bundle due to streamwise tube motion. Flow simulations were carried out for single phase fluid flow in a parallel triangle tube bundle array with 1.2, 1.5 and 1.7 pitch to diameter ratios. The numerical model was validated against numerical and experimental results available in the FEI literature. Simulations were carried out for a range of reduced flow velocities. The model results showed that the upstream flow perturbation magnitude and phase are different from those obtained in the downstream of the moving tube. The obtained flow perturbation characteristics were implemented in the Hassan and Weaver (2016) model and the streamwise FEI threshold was predicted.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
流向流弹性不稳定性的数值预测
最近的实验研究表明,管阵在流向上可能变得不稳定。这与长期持有的观点相反,即流体弹性不稳定性只与流动的横向方向有关。最近新安装的更换蒸汽发生器的故障证实了流向流体弹性不稳定性(FEI)可能对管束的完整性构成潜在威胁。为了揭示这一机制的本质,进行了一些调查。Hassan和Weaver(2016)开发了一个理论框架来模拟一束柔性管中的流向流体弹性不稳定性。该模型对流道面积扰动采用了简单的时滞表达式。目前的工作旨在建立一个数值模型,以精确预测管束中由于顺流运动引起的流动扰动特性。对节径比分别为1.2、1.5和1.7的平行三角形管束阵列中单相流体的流动进行了模拟。数值模型与FEI文献中的数值和实验结果进行了验证。在一定的降低流速范围内进行了模拟。模型结果表明,动管上游的扰动幅度和相位与下游的有所不同。在Hassan and Weaver(2016)模型中实现获得的流动扰动特征,并预测流向FEI阈值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.10
自引率
10.00%
发文量
77
审稿时长
4.2 months
期刊介绍: The Journal of Pressure Vessel Technology is the premier publication for the highest-quality research and interpretive reports on the design, analysis, materials, fabrication, construction, inspection, operation, and failure prevention of pressure vessels, piping, pipelines, power and heating boilers, heat exchangers, reaction vessels, pumps, valves, and other pressure and temperature-bearing components, as well as the nondestructive evaluation of critical components in mechanical engineering applications. Not only does the Journal cover all topics dealing with the design and analysis of pressure vessels, piping, and components, but it also contains discussions of their related codes and standards. Applicable pressure technology areas of interest include: Dynamic and seismic analysis; Equipment qualification; Fabrication; Welding processes and integrity; Operation of vessels and piping; Fatigue and fracture prediction; Finite and boundary element methods; Fluid-structure interaction; High pressure engineering; Elevated temperature analysis and design; Inelastic analysis; Life extension; Lifeline earthquake engineering; PVP materials and their property databases; NDE; safety and reliability; Verification and qualification of software.
期刊最新文献
On The Strength And Tightness Of Asme B16.5 And B16.47 Series A Standard Flanges A Re-Evaluation of Rupture Data for CF8C-Plus Austenitic Stainless Steel Mechanical Properties of Buried Steel Pipe With Polyurethane Isolation Layer Under Strike-Slip Fault An Improved Fixture to Quantify Corrosion in Bolted Flanged Gasketed Joints Methods For Estimating Hydrogen Fuel Tank Characteristics
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1