Discharge Coefficients for Radial-Gated Ogee Spillways by Laboratory Data and by Design of Small Dams

IF 0.8 4区 工程技术 Q4 ENGINEERING, CIVIL Teknik Dergi Pub Date : 2021-07-01 DOI:10.18400/tekderg.540640
T. Haktanir, Mohammed A. Khalaf
{"title":"Discharge Coefficients for Radial-Gated Ogee Spillways by Laboratory Data and by Design of Small Dams","authors":"T. Haktanir, Mohammed A. Khalaf","doi":"10.18400/tekderg.540640","DOIUrl":null,"url":null,"abstract":"Using the measured data on 15 laboratory models in USA, six models and one prototype in Turkey, the discharge coefficients ( C ’s) of radial-gated ogee spillways for various gate opennings and lake water surface elevations are computed. Comparison of these C ’s for 22 spillways with the ones given by Figure 9-31 of Design of Small Dams does not show close agreements. It is determined that C depends on both the angle Ɵ and the ratio d/H 1 , rather than Ɵ only where d and H 1 are the gate opening and the upstream head, and statistically significant regression equations are computed individually for each dam.","PeriodicalId":49442,"journal":{"name":"Teknik Dergi","volume":" ","pages":""},"PeriodicalIF":0.8000,"publicationDate":"2021-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Teknik Dergi","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.18400/tekderg.540640","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0

Abstract

Using the measured data on 15 laboratory models in USA, six models and one prototype in Turkey, the discharge coefficients ( C ’s) of radial-gated ogee spillways for various gate opennings and lake water surface elevations are computed. Comparison of these C ’s for 22 spillways with the ones given by Figure 9-31 of Design of Small Dams does not show close agreements. It is determined that C depends on both the angle Ɵ and the ratio d/H 1 , rather than Ɵ only where d and H 1 are the gate opening and the upstream head, and statistically significant regression equations are computed individually for each dam.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于实验室数据和小型水坝设计的弧形闸门Ogee溢洪道流量系数
利用美国15个实验室模型、土耳其6个模型和1个原型的实测数据,计算了不同闸门开启和湖面高程下弧形闸门泄水道的流量系数。22个溢洪道的C值与《小型水坝设计》图9-31中给出的C值的比较没有显示出密切的一致性。可以确定,C取决于角度和比值d/H1,而不是仅在d和H1为闸门开度和上游水头的情况下才取决于角度,并且对每个大坝单独计算具有统计意义的回归方程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Teknik Dergi
Teknik Dergi 工程技术-工程:土木
自引率
30.80%
发文量
65
审稿时长
>12 weeks
期刊介绍: The scope of Teknik Dergi is naturally confined with the subjects falling in the area of civil engineering. However, the area of civil engineering has recently been significantly enlarged, even the definition of civil engineering has somewhat changed. Half a century ago, engineering was simply defined as “the art of using and converting the natural resources for the benefit of the mankind”. Today, the same objective is expected to be realised (i) by complying with the desire and expectations of the people concerned and (ii) without wasting the resources and within the sustainability principles. This change has required an interaction between engineering and social and administrative sciences. Some subjects at the borderline between civil engineering and social and administrative sciences have consequently been included in the area of civil engineering. Teknik Dergi defines its scope in line with this understanding. However, it requires the papers falling in the borderline to have a significant component of civil engineering.
期刊最新文献
Scheduling, Management and Optimization of Construction Process A Downscaling Application for Local Meteorological Variables of Eastern Black Sea Basin and Scenario Based Predictions Developing a Performance-Based Payment Model in Urban Public Transport Systems Evaluation of Occupational Safety in the Operation and Maintenance Activities of Dams Determination of Finite Element Modelling Errors for Box Culverts Using Field Load Tests
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1