Investigation of the effect of trisodium-citrate on blood coagulation by viscometric approach

Q3 Agricultural and Biological Sciences Progress in Agricultural Engineering Sciences Pub Date : 2020-11-05 DOI:10.1556/446.2020.20003
T. Csurka, K. Pásztor-Huszár, A. Tóth, R. Pintér, L. Friedrich
{"title":"Investigation of the effect of trisodium-citrate on blood coagulation by viscometric approach","authors":"T. Csurka, K. Pásztor-Huszár, A. Tóth, R. Pintér, L. Friedrich","doi":"10.1556/446.2020.20003","DOIUrl":null,"url":null,"abstract":"Blood coagulation is a process, which is initiated by certain physico-chemical effects. This process results in a change in the blood from the sol state, that is well suited for further processing, to gel state. 13 blood clotting factors take part in the cascade system of blood coagulation. Trisodium-citrate affects factor IV, the calcium, and prevents the change in blood texture. The effect of different concentrations of trisodium-citrate (0, 0.48, 2.4, 4.8, 9.6, 14.4, 19.2, 24 w/w%) on the texture of blood is investigated. Porcine blood was collected in 20 cm3 test tubes in a slaughterhouse directly before trisodium-citrate addition and was stored for one day under refrigerated conditions. The samples without trisodium-citrate coagulated and the samples with high trisodium-citrate (4–5 g) became solid as well because of the protein salting-out. The viscosity of successfully treated samples and the shear stress were measured with a rotational viscometer (Physica MCR 51, Anton-Paar) with concentric cylinders and Couette type method. The flow behavior of all samples could be described by the Herschel-Bulkley model. The yield point, the consistency index and the power of law index, which are determined by the equation of the model, showed that the samples with lower trisodium-citrate content coagulated “better” and the sample with high trisodium-citrate were most similar to Newtonian fluid. The results are trend-likes, but significant differences may be expected in the case of higher sample amount. The yield point of the sample, which contained 14.4 w/w% trisodium-citrate, was by 37.3% less than the sample containing 0.48% trisodium-citrate, and the consistency index of the sample with 3 g trisodium-citrate was by 20.5% higher than that of the sample with 0.48% trisodium-citrate. Thanks to these results a cheaper concentration and drying of porcine blood and blood fractions are available because no surplus water is added to the blood.","PeriodicalId":20837,"journal":{"name":"Progress in Agricultural Engineering Sciences","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2020-11-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Progress in Agricultural Engineering Sciences","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1556/446.2020.20003","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Agricultural and Biological Sciences","Score":null,"Total":0}
引用次数: 3

Abstract

Blood coagulation is a process, which is initiated by certain physico-chemical effects. This process results in a change in the blood from the sol state, that is well suited for further processing, to gel state. 13 blood clotting factors take part in the cascade system of blood coagulation. Trisodium-citrate affects factor IV, the calcium, and prevents the change in blood texture. The effect of different concentrations of trisodium-citrate (0, 0.48, 2.4, 4.8, 9.6, 14.4, 19.2, 24 w/w%) on the texture of blood is investigated. Porcine blood was collected in 20 cm3 test tubes in a slaughterhouse directly before trisodium-citrate addition and was stored for one day under refrigerated conditions. The samples without trisodium-citrate coagulated and the samples with high trisodium-citrate (4–5 g) became solid as well because of the protein salting-out. The viscosity of successfully treated samples and the shear stress were measured with a rotational viscometer (Physica MCR 51, Anton-Paar) with concentric cylinders and Couette type method. The flow behavior of all samples could be described by the Herschel-Bulkley model. The yield point, the consistency index and the power of law index, which are determined by the equation of the model, showed that the samples with lower trisodium-citrate content coagulated “better” and the sample with high trisodium-citrate were most similar to Newtonian fluid. The results are trend-likes, but significant differences may be expected in the case of higher sample amount. The yield point of the sample, which contained 14.4 w/w% trisodium-citrate, was by 37.3% less than the sample containing 0.48% trisodium-citrate, and the consistency index of the sample with 3 g trisodium-citrate was by 20.5% higher than that of the sample with 0.48% trisodium-citrate. Thanks to these results a cheaper concentration and drying of porcine blood and blood fractions are available because no surplus water is added to the blood.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
用粘度法研究柠檬酸三钠对血液凝固的影响
血液凝固是一个由一定的物理化学作用引起的过程。这一过程导致血液从适合进一步处理的溶胶状态转变为凝胶状态。13种凝血因子参与了血凝的级联系统。柠檬酸三钠影响因子IV,钙,并防止血液质地的变化。研究了不同浓度的柠檬酸三钠(0、0.48、2.4、4.8、9.6、14.4、19.2、24 w/w%)对血液质地的影响。在添加柠檬酸三钠之前,直接在屠宰场的20 cm3试管中采集猪血,并在冷藏条件下保存一天。不含柠檬酸三钠的样品凝固,含高柠檬酸三钠(4-5 g)的样品也因蛋白质盐析而凝固。采用旋转粘度计(Physica MCR 51, Anton-Paar)和Couette法测量处理后样品的粘度和剪切应力。所有样品的流动行为都可以用Herschel-Bulkley模型来描述。由模型方程确定的屈服点、稠度指数和定律幂指数表明,柠檬酸三钠含量较低的样品凝固效果较好,柠檬酸三钠含量较高的样品与牛顿流体最相似。结果与趋势相似,但在样本量较大的情况下,可能会出现显著差异。柠檬酸三钠浓度为14.4 w/w%时,所得样品的屈服点比0.48%时降低了37.3%;柠檬酸三钠浓度为3g时,所得样品的一致性指数比0.48%时提高了20.5%。由于这些结果,由于没有多余的水添加到血液中,因此可以更便宜地浓缩和干燥猪血液和血液馏分。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Progress in Agricultural Engineering Sciences
Progress in Agricultural Engineering Sciences Engineering-Industrial and Manufacturing Engineering
CiteScore
1.80
自引率
0.00%
发文量
6
期刊介绍: The Journal publishes original papers, review papers and preliminary communications in the field of agricultural, environmental and process engineering. The main purpose is to show new scientific results, new developments and procedures with special respect to the engineering of crop production and animal husbandry, soil and water management, precision agriculture, information technology in agriculture, advancements in instrumentation and automation, technical and safety aspects of environmental and food engineering.
期刊最新文献
Enhancing protein extraction from soybean expeller: Exploring the impact of precipitating agents and flour-to-water ratios on functional properties Microwave-assisted extraction of pectin from queen pineapple (Ananas comosus L.) peel Heat, ultrasound, and microwave assisted extraction methods for recovering bioactive components from hawthorn fruit (Crataegus monogyna Jacq.) Influence of various tillage systems and tillage speed on some soil physical properties Sustainable approach for the collection and processing of medicinal and aromatic plants in Hungary
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1