Removal of Copper from Acid Mine Drainage (AMD) or Acid Rock Drainage (ARD)

Abstract

Acid mine drainage is wastewater from a mine having a low pH and an elevated level of dissolved heavy metals. These metals are harmful to aquatic, animal and human life. This paper looks at the removal of copper from acid mine drainage using ion exchange to less than 1 mg/l. A weak acidic cation resin was used. Spectrophotometric determination of copper with sodium diethyldithiocarbamate was used to determine the copper concentrations in the treated water. Using regression analysis, the experimental results gave a correlation coefficient of 0.977 and a coefficient of determination of 99.5%. Results indicated that the higher the flows rate the shorter the period after which the copper concentration in the treated water reaches 1 mg/l. At pH 3.85 and 5.09, the resin performed better and at pH above 6.62 and between pH 3.0 and below the resin’s does not perform well. The higher the resin height the greater is the resin exchange capacity and the longer it takes for the copper concentration to reach 1 mg/l in the treated water. The higher the wastewater copper concentration the shorter the time it takes the resin to reach 1 mg/l. The results for this experiment indicated that acid mine drainage can be treated well by ion exchange resins, but it is also very important to establish suitable operating conditions.