Prediction of permeability of five-harness satin fabric by a modified Kozeny constant determined from experiments

IF 3.1 Q2 MATERIALS SCIENCE, COMPOSITES Functional Composites and Structures Pub Date : 2021-12-29 DOI:10.1088/2631-6331/ac46fa
Dongchul Park, Tianyu Yu, Soojeong Park, Do-Hoon Shin, Yun-Hae Kim
{"title":"Prediction of permeability of five-harness satin fabric by a modified Kozeny constant determined from experiments","authors":"Dongchul Park, Tianyu Yu, Soojeong Park, Do-Hoon Shin, Yun-Hae Kim","doi":"10.1088/2631-6331/ac46fa","DOIUrl":null,"url":null,"abstract":"Permeability is a critical parameter not only in flow simulation analysis but also in liquid composite molding process. When a liquid resin is infused into a dry preform, the impregnation is mainly characterized by the permeability. The permeability of a dry preform can be obtained through theoretical and experimental methods. In the theoretical estimation of permeability, the effects of fiber arrangement as well as fabric type and form for various types of preforms are not sufficiently reflected in the calculation. Thus, there is a gap between the theoretical and experimental permeability. Recently, experimental determination has been gaining considerable attention as a mean to obtain accurate permeability values; however, it requires a number of trials. In this study, the permeability of the Hexforce G0926 5HS (five-harness satin) carbon fabric preform is estimated using representative theoretical prediction models, the Gebart and Kozeny–Carman equations. In addition to the Kozeny–Carman permeability (using the Kozeny constant values from literature), the Kozeny constant obtained through experiments was used to obtain a modified Kozeny–Carman permeability. All three calculated permeabilities were compared and verified with the fabric manufacturer’s reference value. The results showed that the modified Kozeny–Carman permeability using the experimentally determined Kozeny constant was closest to the reference value at 57% fiber volume fraction. Further, the predicted permeability was compared with other experimental permeability values from literature over the 40%–65% range of fiber volume fraction. We found that the modified Kozeny–Carman permeability once again came closest to the literature values. Finally, an optimized fitting equation was proposed to replace the Kozeny–Carman equation for predicting the permeability of Hexforce G0926 5HS carbon fabric over the 40%–65% fiber volume fraction range.","PeriodicalId":12652,"journal":{"name":"Functional Composites and Structures","volume":"4 1","pages":""},"PeriodicalIF":3.1000,"publicationDate":"2021-12-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Functional Composites and Structures","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1088/2631-6331/ac46fa","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, COMPOSITES","Score":null,"Total":0}
引用次数: 1

Abstract

Permeability is a critical parameter not only in flow simulation analysis but also in liquid composite molding process. When a liquid resin is infused into a dry preform, the impregnation is mainly characterized by the permeability. The permeability of a dry preform can be obtained through theoretical and experimental methods. In the theoretical estimation of permeability, the effects of fiber arrangement as well as fabric type and form for various types of preforms are not sufficiently reflected in the calculation. Thus, there is a gap between the theoretical and experimental permeability. Recently, experimental determination has been gaining considerable attention as a mean to obtain accurate permeability values; however, it requires a number of trials. In this study, the permeability of the Hexforce G0926 5HS (five-harness satin) carbon fabric preform is estimated using representative theoretical prediction models, the Gebart and Kozeny–Carman equations. In addition to the Kozeny–Carman permeability (using the Kozeny constant values from literature), the Kozeny constant obtained through experiments was used to obtain a modified Kozeny–Carman permeability. All three calculated permeabilities were compared and verified with the fabric manufacturer’s reference value. The results showed that the modified Kozeny–Carman permeability using the experimentally determined Kozeny constant was closest to the reference value at 57% fiber volume fraction. Further, the predicted permeability was compared with other experimental permeability values from literature over the 40%–65% range of fiber volume fraction. We found that the modified Kozeny–Carman permeability once again came closest to the literature values. Finally, an optimized fitting equation was proposed to replace the Kozeny–Carman equation for predicting the permeability of Hexforce G0926 5HS carbon fabric over the 40%–65% fiber volume fraction range.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
用改进的科泽尼常数预测五束缎面织物的透气性
渗透性不仅在流动模拟分析中是一个关键参数,在液体复合材料成型过程中也是如此。当液体树脂被注入到干燥的预成型件中时,浸渍的主要特征是渗透性。干燥预成型件的渗透性可以通过理论和实验方法获得。在渗透率的理论估计中,纤维排列以及织物类型和形式对各种类型预成型件的影响在计算中没有得到充分反映。因此,理论渗透率和实验渗透率之间存在差距。最近,实验测定作为获得准确渗透率值的一种手段,受到了相当大的关注;然而,它需要大量的试验。在本研究中,使用代表性的理论预测模型Gebart和Kozeny–Carman方程估计了Hexforce G0926 5HS(五束缎)碳织物预成型件的渗透率。除了Kozeny–Carman渗透率(使用文献中的Kozeny常数值)外,通过实验获得的Kozeney常数也用于获得修正的Kozeny-Carman渗透率。将所有三种计算的渗透性与织物制造商的参考值进行比较和验证。结果表明,在纤维体积分数为57%时,使用实验确定的Kozeny常数修改的Kozeny-Carman渗透率最接近参考值。此外,在纤维体积分数的40%-65%范围内,将预测渗透率与文献中的其他实验渗透率值进行了比较。我们发现,修正后的Kozeny–Carman渗透率再次接近文献值。最后,提出了一个优化拟合方程来代替Kozeny–Carman方程,用于预测Hexforce G0926 5HS碳织物在40%–65%纤维体积分数范围内的渗透率。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Functional Composites and Structures
Functional Composites and Structures Materials Science-Materials Science (miscellaneous)
CiteScore
4.80
自引率
10.70%
发文量
33
期刊最新文献
Advanced doping method for highly conductive CNT fibers with enhanced thermal stability A simplified predictive model for the compression behavior of self-healing microcapsules using an empirical coefficient Development of multi droplet-based electricity generator system for energy harvesting improvement from a single droplet Measurement of the water absorption on hybrid carbon fibre prepreg waste composite and its impact on flexural performance Simulation of the tensile behaviour of biaxial knitted fabrics produced based on rib structure using a macro constitutive model
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1