Optimization of cotton fabrics dyeing process using various natural dye extracts

E. Rahayuningsih, Taranipa Marfitania, Mukmin Sapto Pamungkas, M. S. Pamungkas, Wachid Siti Fatimah, Wachid Siti Fatimah
{"title":"Optimization of cotton fabrics dyeing process using various natural dye extracts","authors":"E. Rahayuningsih, Taranipa Marfitania, Mukmin Sapto Pamungkas, M. S. Pamungkas, Wachid Siti Fatimah, Wachid Siti Fatimah","doi":"10.22146/jrekpros.70397","DOIUrl":null,"url":null,"abstract":"A B S T R A C TEfforts to substitute synthetic dyes on fabrics for natural dyes are currently increasing. Research and innovation are extremely needed to support those attempts so that the quality of natural dyes is more competitive than synthetic dyes. This study aims to optimize the dyeing parameters of cotton fabrics using natural dye extracts derived from the barks of Tegeran (Cudrania javanensis), Merbau (Intsia bijuga), Tingi (Ceriops tagal), and Jambal (Peltophorum pterocarpum), as well as Jolawe (Terminalia bellirica) fruit peel. Varied dyeing parameters included dye concentration, dyeing time and temperature, and material to liquor ratio (MLR). The fixative solutions used were alum, lime, and iron (II) sulfate. The optimized parameters were based on the values of color depth and evenness, measured colorimetrically. Furthermore, the obtained results of the dyeing process under optimized conditions were analyzed for color quality by measuring color coordinates as well as the values of color strength (K/S), washing fastness, and light fastness. The results showed that the optimal dyeing conditions for all natural dye extracts used were the code A extract concentrations (0.0113 g/mL of Tegeran; 0.0115 g/mL of Merbau; 0.0204 g/mL of Jambal; and 0.0582 g/mL of Jolawe), dyeing at 28°C, dyeing time of 30 minutes, and the MLR of 1:30. The resulting color variations were brown, gray, and golden yellow for the Tegeran extract with alum fixative. The highest K/S value was 5.56 for the fabric dyed in Tegeran extract with iron (II) sulfate fixative solution. The washing fastness values for Merbau, Tingi, Jambal, and Jolawe were 3-4 (fairly good) to 4-5 (excellent). Meanwhile, the light fastness values for all dyes were between 4 (good) and 5 (excellent). Overall, the standard procedure for cotton fabric dyeing that meets the minimum standards for textile products is obtained.Keywords: cotton fabric; color quality; natural dyes; optimization; standard procedure for dyeingA B S T R A KUsaha substitusi penggunaan pewarna sintetis pada kain dengan pewarna alami semakin meningkat belakangan ini. Hal ini perlu didukung dengan penelitian dan inovasi agar kualitas pewarna alami lebih kompetitif terhadap pewarna sintetis. Penelitian ini bertujuan untuk mengoptimalkan parameter pewarnaan kain katun dengan ekstrak pewarna alami dari kulit kayu Tegeran (Cudrania javanensis), Merbau (Intsia bijuga), Tingi (Ceriops tagal), Jambal (Peltophorum pterocarpum), dan kulit buah Jolawe (Terminalia bellirica). Parameter pewarnaan yang divariasikan antara lain konsentrasi pewarna, waktu dan suhu pewarnaan, serta rasio kain dengan volume larutan fiksator. Larutan fiksator yang digunakan adalah tawas, kapur, dan tunjung. Paramater terikat yang dioptimasikan didasarkan pada nilai ketuaan dan kerataan warna yang diukur secara kolorimetri. Selanjutnya hasil pewarnaan dengan kondisi yang teroptimasi dianalisis kualitas warna melalui pengukuran koordinat warna, nilai kekuatan warna(K/S), dan nilai tahan luntur terhadap pencucian dan cahaya. Hasil menunjukkan bahwa parameter pewarnaan yang optimal untuk semua ekstrak pewarna alami yang digunakan adalah pada konsentrasi ekstrak dengan kode A (0,0113 g/mL Tegeran; 0,0115 g/mL Merbau; 0,0204 g/mL Jambal; dan 0,0582 g/mL Jolawe), pewarnaan pada suhu kamar, waktu pewarnaan 30 menit, dan rasio kain dengan volume larutan fiksator 1:30. Variasi warna yang dihasilkan adalah warna cokelat, abu-abu, dan kuning emas untuk ekstrak tegeran dengan fiksator tawas. Nilai K/S tertinggi sebesar 5,56 untuk kain yang diwarnai dengan ekstrak Tegeran dengan larutan fiksator tunjung. Nilai uji kelunturan terhadap pencucian untuk Merbau, Tingi, Jambal, dan Jolawe adalah 3-4 (cukup baik) sampai dengan 4-5 (sangat baik). Nilai kelunturan terhadap cahaya untuk semua jenis pewarna adalah antara 4 (baik) sampai dengan 5 (sangat baik). Secara keseluruhan, didapatkan prosedur standar pewarnaan kain katun yang memenuhi standar minimum produk tekstil.Kata kunci: kain katun; kualitas warna; optimasi; pewarna alami; standar pewarnaan ","PeriodicalId":17711,"journal":{"name":"Jurnal Rekayasa Proses","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-07-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Jurnal Rekayasa Proses","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.22146/jrekpros.70397","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

A B S T R A C TEfforts to substitute synthetic dyes on fabrics for natural dyes are currently increasing. Research and innovation are extremely needed to support those attempts so that the quality of natural dyes is more competitive than synthetic dyes. This study aims to optimize the dyeing parameters of cotton fabrics using natural dye extracts derived from the barks of Tegeran (Cudrania javanensis), Merbau (Intsia bijuga), Tingi (Ceriops tagal), and Jambal (Peltophorum pterocarpum), as well as Jolawe (Terminalia bellirica) fruit peel. Varied dyeing parameters included dye concentration, dyeing time and temperature, and material to liquor ratio (MLR). The fixative solutions used were alum, lime, and iron (II) sulfate. The optimized parameters were based on the values of color depth and evenness, measured colorimetrically. Furthermore, the obtained results of the dyeing process under optimized conditions were analyzed for color quality by measuring color coordinates as well as the values of color strength (K/S), washing fastness, and light fastness. The results showed that the optimal dyeing conditions for all natural dye extracts used were the code A extract concentrations (0.0113 g/mL of Tegeran; 0.0115 g/mL of Merbau; 0.0204 g/mL of Jambal; and 0.0582 g/mL of Jolawe), dyeing at 28°C, dyeing time of 30 minutes, and the MLR of 1:30. The resulting color variations were brown, gray, and golden yellow for the Tegeran extract with alum fixative. The highest K/S value was 5.56 for the fabric dyed in Tegeran extract with iron (II) sulfate fixative solution. The washing fastness values for Merbau, Tingi, Jambal, and Jolawe were 3-4 (fairly good) to 4-5 (excellent). Meanwhile, the light fastness values for all dyes were between 4 (good) and 5 (excellent). Overall, the standard procedure for cotton fabric dyeing that meets the minimum standards for textile products is obtained.Keywords: cotton fabric; color quality; natural dyes; optimization; standard procedure for dyeingA B S T R A KUsaha substitusi penggunaan pewarna sintetis pada kain dengan pewarna alami semakin meningkat belakangan ini. Hal ini perlu didukung dengan penelitian dan inovasi agar kualitas pewarna alami lebih kompetitif terhadap pewarna sintetis. Penelitian ini bertujuan untuk mengoptimalkan parameter pewarnaan kain katun dengan ekstrak pewarna alami dari kulit kayu Tegeran (Cudrania javanensis), Merbau (Intsia bijuga), Tingi (Ceriops tagal), Jambal (Peltophorum pterocarpum), dan kulit buah Jolawe (Terminalia bellirica). Parameter pewarnaan yang divariasikan antara lain konsentrasi pewarna, waktu dan suhu pewarnaan, serta rasio kain dengan volume larutan fiksator. Larutan fiksator yang digunakan adalah tawas, kapur, dan tunjung. Paramater terikat yang dioptimasikan didasarkan pada nilai ketuaan dan kerataan warna yang diukur secara kolorimetri. Selanjutnya hasil pewarnaan dengan kondisi yang teroptimasi dianalisis kualitas warna melalui pengukuran koordinat warna, nilai kekuatan warna(K/S), dan nilai tahan luntur terhadap pencucian dan cahaya. Hasil menunjukkan bahwa parameter pewarnaan yang optimal untuk semua ekstrak pewarna alami yang digunakan adalah pada konsentrasi ekstrak dengan kode A (0,0113 g/mL Tegeran; 0,0115 g/mL Merbau; 0,0204 g/mL Jambal; dan 0,0582 g/mL Jolawe), pewarnaan pada suhu kamar, waktu pewarnaan 30 menit, dan rasio kain dengan volume larutan fiksator 1:30. Variasi warna yang dihasilkan adalah warna cokelat, abu-abu, dan kuning emas untuk ekstrak tegeran dengan fiksator tawas. Nilai K/S tertinggi sebesar 5,56 untuk kain yang diwarnai dengan ekstrak Tegeran dengan larutan fiksator tunjung. Nilai uji kelunturan terhadap pencucian untuk Merbau, Tingi, Jambal, dan Jolawe adalah 3-4 (cukup baik) sampai dengan 4-5 (sangat baik). Nilai kelunturan terhadap cahaya untuk semua jenis pewarna adalah antara 4 (baik) sampai dengan 5 (sangat baik). Secara keseluruhan, didapatkan prosedur standar pewarnaan kain katun yang memenuhi standar minimum produk tekstil.Kata kunci: kain katun; kualitas warna; optimasi; pewarna alami; standar pewarnaan 
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
不同天然染料提取物对棉织物染色工艺的优化
目前,用合成染料代替天然染料的努力正在增加。迫切需要研究和创新来支持这些尝试,使天然染料的质量比合成染料更具竞争力。本研究旨在利用从Tegeran(Cudrania javanensis)、Merbau(Intsia bijuga)、Tingi(Ceriops tagal)和Jambal(Peltophorum pterocarpum)树皮以及Jolawe(Terminalia bellrica)果皮中提取的天然染料提取物优化棉织物的染色参数。不同的染色参数包括染料浓度、染色时间和温度以及料液比。使用的固定剂溶液是明矾、石灰和硫酸铁(II)。优化的参数是基于色度测量的颜色深度和均匀度的值。此外,通过测量色坐标以及色强度(K/S)、洗涤牢度和耐光牢度的值,分析了在优化条件下染色工艺的结果,以获得色质量。结果表明,所有使用的天然染料提取物的最佳染色条件是编码A提取物浓度(0.0113 g/mL的Tegeran;0.0115 g/mL的Merbau;0.0204 g/mL的Jambal;和0.0582 g/mL的Jolawe),在28°C下染色,染色时间为30分钟,MLR为1:30。对于具有明矾固定剂的Tegeran提取物,得到的颜色变化为棕色、灰色和金黄色。用硫酸铁(II)固定液在泰格兰提取物中染色的织物的最高K/S值为5.56。Merbau、Tingi、Jambal和Jolawe的洗涤牢度值为3-4(相当好)至4-5(极好)。同时,所有染料的耐光牢度值都在4(良好)到5(极好)之间。总体而言,获得了符合纺织品最低标准的棉布染色标准程序。关键词:色彩质量;天然染料;优化;染色的标准程序这需要研究和创新的支持,使自然色与合成色更具竞争力。本研究旨在通过从Tegeran(Cudrania javanensis)、Merbau(Southern India)、Height(Ceriops tagal)、Jambal(Peltophorum pterocarpum)和Jolawe(Terminalia bellrica)中提取天然色素来优化棉织物的染色参数。着色参数在颜色浓度、着色时间和温度以及布与定影剂溶液体积的比率之间进行区分。使用的解决方案是大笑、戴帽子和叹气。优化的边界参数基于色度测量的头部和牙冠值。接下来,通过测量颜色坐标、颜色强度(K/S)的值以及对洗涤和光的平滑耐受性来分析优化的着色条件的结果。结果表明,所用所有天然色素提取物的最佳着色参数为提取物浓度,代码为A(00113 g/mL Tegeran;00115 g/mL Merbau;00204 g/mL Jambal;和00582 g/mL Jolawe),室温着色,着色时间为30分钟,固定溶液体积的布比为1:30。产生的颜色变化是巧克力色、灰色和黄色,用于用可笑的固定器提取被盖。对于用泰格兰提取物和固定的闪光溶液染色的织物,最大K/S值为5.56。Merbau、Tingi、Jambal和Jolawe的洗衣测试分数为3-4(相当好)至4-5(非常好)。所有颜色的发光值在4(良好)和5(非常好)之间。总体而言,获得了符合纺织产品最低标准的标准棉织物染色程序。关键词:棉布;色彩质量;优化;天然染料;着色标准
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
17
审稿时长
16 weeks
期刊最新文献
PENGARUH BATU BATA PRESS SEBAGAI SUBSTITUSI AGREGAT KASAR TERHADAP NILAI KUAT TEKAN BETON ANALISA PENGARUH KEHALUSAN FLY ASH BATUBARA TERHADAP MUTU BETON GEOPOLYMER DARI LIMBAH B3 DENGAN AKTIVATOR POTASSIUM Trans Siginjai ANALISIS POTENSI PERMINTAAN (DEMAND) TRANS SIGINJAI RUTE TELANAI PURA - SENGETI KUAT TEKAN CAMPURAN ROLLER COMPACTED CONCRETE (RCC) DENGAN MENGGUNAKAN SILIKA FUME DAN SUPER PLASTICIZER Kajian Dampak Pajanan Radiasi Panas Saat Terjadi Tumpahan Minyak dan Kebakaran Tangki di Pusat Pengumpul Produksi Minyak PT. X
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1