Qualimetric assessment of metrological characteristics of household gas meters during periodic verification

IF 0.1 Q4 INSTRUMENTS & INSTRUMENTATION Ukrainian Metrological Journal Pub Date : 2021-07-02 DOI:10.24027/2306-7039.2.2021.236086
Орест Євгенович Середюк, Олександр Криницький, Василь Романів, Деніс Середюк, Анна Григорівна Винничук
{"title":"Qualimetric assessment of metrological characteristics of household gas meters during periodic verification","authors":"Орест Євгенович Середюк, Олександр Криницький, Василь Романів, Деніс Середюк, Анна Григорівна Винничук","doi":"10.24027/2306-7039.2.2021.236086","DOIUrl":null,"url":null,"abstract":"Informative parameters for statistical estimation of operational error of SAMGAS, METRIX, PREMAGAS household gas meters (HGM) are formulated. These are the values of the measured volume during the verification period of operation and the experimentally determined error of the meter during operation at three normalized flow rates: minimum, maximum and 20% of the maximum. \nSix ranges of variation of the HGM error at the minimum flow rate were selected to form statistical samples of meters. According to the proposed algorithm, the change in the weighted average HGM error for three normalized flow rates from the measured volume is quantified, taking into account the number of HGMs and their error ranges. It is proposed to apply the concept of generalized weighted average error of HGM, which reflects the operational error of HGMs during their operation in the entire range of consumption when measuring gas volumes up to 60 thousand cubic meters.","PeriodicalId":40775,"journal":{"name":"Ukrainian Metrological Journal","volume":null,"pages":null},"PeriodicalIF":0.1000,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ukrainian Metrological Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.24027/2306-7039.2.2021.236086","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"INSTRUMENTS & INSTRUMENTATION","Score":null,"Total":0}
引用次数: 0

Abstract

Informative parameters for statistical estimation of operational error of SAMGAS, METRIX, PREMAGAS household gas meters (HGM) are formulated. These are the values of the measured volume during the verification period of operation and the experimentally determined error of the meter during operation at three normalized flow rates: minimum, maximum and 20% of the maximum. Six ranges of variation of the HGM error at the minimum flow rate were selected to form statistical samples of meters. According to the proposed algorithm, the change in the weighted average HGM error for three normalized flow rates from the measured volume is quantified, taking into account the number of HGMs and their error ranges. It is proposed to apply the concept of generalized weighted average error of HGM, which reflects the operational error of HGMs during their operation in the entire range of consumption when measuring gas volumes up to 60 thousand cubic meters.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
定期检定时家用燃气表计量特性的质量评定
制定了SAMGAS、METRIX、PREMAGAS家用燃气表(HGM)运行误差统计估计的信息性参数。这些是在运行验证期间测量的体积值,以及在三种标准化流速(最小、最大和最大的20%)下运行期间仪表的实验确定的误差。选择最小流速下HGM误差的六个变化范围来形成流量计的统计样本。根据所提出的算法,在考虑HGM的数量及其误差范围的情况下,量化了来自测量体积的三个归一化流速的加权平均HGM误差的变化。建议应用HGM广义加权平均误差的概念,该概念反映了HGM在测量高达6万立方米的天然气体积时在整个消耗范围内运行时的操作误差。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Ukrainian Metrological Journal
Ukrainian Metrological Journal INSTRUMENTS & INSTRUMENTATION-
自引率
0.00%
发文量
21
期刊最新文献
A statistical method for the assessment of metrological characteristics of reference materials Study of metrological characteristics of the state primary measurement standard of volume flow and mass consumption of liquid in preparation for participation in international comparisons The estimation of the long-term drift of the inductance measurement standards Study of reading errors when calibrating analog ohmmeters Modern approaches to studying the accuracy of determination of deformation values in geodesic monitoring of crane equipment
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1