Effects of Particle Size and Type of Alumina on the Morphology and Photoluminescence Properties of SrAlO:Eu+/Dy+ Phosphor

4区 材料科学 Q2 Engineering Advances in Materials Science and Engineering Pub Date : 2009-03-04 DOI:10.1155/2009/475074
H. Luitel, T. Watari, T. Torikai, M. Yada
{"title":"Effects of Particle Size and Type of Alumina on the Morphology and Photoluminescence Properties of SrAlO:Eu+/Dy+ Phosphor","authors":"H. Luitel, T. Watari, T. Torikai, M. Yada","doi":"10.1155/2009/475074","DOIUrl":null,"url":null,"abstract":"Sr4Al14O25:Eu /Dy phosphor with high luminescence intensity and long afterglow duration was synthesized using 1.0 μm (α), 0.1 μm (α), and 0.05 μm (γ) particle sizes of Al2O3. SEM observation results showed that spike-like thin particles were formed when 0.05 μm γ-Al2O3 was used as raw material. Hexagonal thick particles were observed when 0.1 μm α-Al2O3 was used. But irregular, thin particles were observed while using 1 μm α-Al2O3. Photoluminescence measurements showed that both the initial intensity and the long persistency were much higher for the phosphor prepared using γ-Al2O3 of 0.05 μm particle size.","PeriodicalId":7345,"journal":{"name":"Advances in Materials Science and Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2009-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1155/2009/475074","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advances in Materials Science and Engineering","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1155/2009/475074","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 6

Abstract

Sr4Al14O25:Eu /Dy phosphor with high luminescence intensity and long afterglow duration was synthesized using 1.0 μm (α), 0.1 μm (α), and 0.05 μm (γ) particle sizes of Al2O3. SEM observation results showed that spike-like thin particles were formed when 0.05 μm γ-Al2O3 was used as raw material. Hexagonal thick particles were observed when 0.1 μm α-Al2O3 was used. But irregular, thin particles were observed while using 1 μm α-Al2O3. Photoluminescence measurements showed that both the initial intensity and the long persistency were much higher for the phosphor prepared using γ-Al2O3 of 0.05 μm particle size.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
氧化铝粒度和类型对SrAlO:Eu+/Dy+荧光粉形貌和发光性能的影响
采用粒径分别为1.0 μm (α)、0.1 μm (α)和0.05 μm (γ)的Al2O3合成了发光强度高、余辉持续时间长的Eu /Dy荧光粉Sr4Al14O25。SEM观察结果表明,当以0.05 μm γ-Al2O3为原料时,形成了尖峰状的细颗粒。当α-Al2O3为0.1 μm时,可以观察到六方厚颗粒。而在1 μm α-Al2O3层中,可以观察到不规则的细颗粒。光致发光实验表明,用0.05 μm的γ-Al2O3制备的荧光粉初始强度和长持续时间都有明显提高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Advances in Materials Science and Engineering
Advances in Materials Science and Engineering Materials Science-General Materials Science
CiteScore
3.30
自引率
0.00%
发文量
0
审稿时长
4-8 weeks
期刊介绍: Advances in Materials Science and Engineering is a broad scope journal that publishes articles in all areas of materials science and engineering including, but not limited to: -Chemistry and fundamental properties of matter -Material synthesis, fabrication, manufacture, and processing -Magnetic, electrical, thermal, and optical properties of materials -Strength, durability, and mechanical behaviour of materials -Consideration of materials in structural design, modelling, and engineering -Green and renewable materials, and consideration of materials’ life cycles -Materials in specialist applications (such as medicine, energy, aerospace, and nanotechnology)
期刊最新文献
Evaluating Sisal Fiber-Reinforced Gypsum Composites for Water Absorption and Mechanical Performance Extraction and Characterization of Cellulose from Coffee Husk and Brewery’s Spent Grain Fibers Using Alkali-Hydrogen Peroxide Treatment Method Multiobjective Optimization of Hard Turning on OHNS Steel Using Desirability and TOPSIS Approaches Enhancing Communication Reliability: Designing Microwave Links for Bahir Dar-Woretta Connectivity Breaking Boundaries with Ceramic Matrix Composites: A Comprehensive Overview of Materials, Manufacturing Techniques, Transformative Applications, Recent Advancements, and Future Prospects
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1