High-Temperature Oxidation of MCrAlY Coating Modified by Alumina Deposited by an MOCVD Process

IF 1.5 3区 材料科学 Q2 METALLURGY & METALLURGICAL ENGINEERING Oxidation of Metals Pub Date : 2023-07-25 DOI:10.1007/s11085-023-10172-4
Melquisedec Vicente-Mendoza, Alma Mora-García, Juan Muñoz-Saldaña, Fernando Juárez-López
{"title":"High-Temperature Oxidation of MCrAlY Coating Modified by Alumina Deposited by an MOCVD Process","authors":"Melquisedec Vicente-Mendoza,&nbsp;Alma Mora-García,&nbsp;Juan Muñoz-Saldaña,&nbsp;Fernando Juárez-López","doi":"10.1007/s11085-023-10172-4","DOIUrl":null,"url":null,"abstract":"<div><p>Spray parameters were fixed to depositing a MCrAlY coating by HVOF process on IN-708 substrate. The deposited coatings exhibited a microstructure with characteristic splats and <i>β</i> and <b><i>γ</i></b> phases. An MOCVD process was subsequently carried out to deposit a thin alumina layer on the sprayed MCrAlY coating. Cyclic oxidation tests were conducted at high temperature on the alumina/MCrAlY coating system. Both SEM and XRD analyses were used to characterize the thermally grown oxide after cyclic oxidation. A kinetic analysis was done to determinate the behaviour of the alumina/MCrAlY coating system during oxidation.</p></div>","PeriodicalId":724,"journal":{"name":"Oxidation of Metals","volume":"100 3-4","pages":"193 - 207"},"PeriodicalIF":1.5000,"publicationDate":"2023-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11085-023-10172-4.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Oxidation of Metals","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11085-023-10172-4","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

Spray parameters were fixed to depositing a MCrAlY coating by HVOF process on IN-708 substrate. The deposited coatings exhibited a microstructure with characteristic splats and β and γ phases. An MOCVD process was subsequently carried out to deposit a thin alumina layer on the sprayed MCrAlY coating. Cyclic oxidation tests were conducted at high temperature on the alumina/MCrAlY coating system. Both SEM and XRD analyses were used to characterize the thermally grown oxide after cyclic oxidation. A kinetic analysis was done to determinate the behaviour of the alumina/MCrAlY coating system during oxidation.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
MOCVD法沉积氧化铝改性mccraly涂层的高温氧化研究
确定了在IN-708基体上采用HVOF沉积mccraly涂层的喷涂参数。沉积的涂层具有典型的片状和β、γ相的微观结构。随后进行MOCVD工艺,在喷涂的MCrAlY涂层上沉积薄氧化铝层。对氧化铝/MCrAlY涂层体系进行了高温循环氧化试验。利用SEM和XRD对循环氧化后的热生长氧化物进行了表征。通过动力学分析确定了氧化铝/MCrAlY涂层体系在氧化过程中的行为。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Oxidation of Metals
Oxidation of Metals 工程技术-冶金工程
CiteScore
5.10
自引率
9.10%
发文量
47
审稿时长
2.2 months
期刊介绍: Oxidation of Metals is the premier source for the rapid dissemination of current research on all aspects of the science of gas-solid reactions at temperatures greater than about 400˚C, with primary focus on the high-temperature corrosion of bulk and coated systems. This authoritative bi-monthly publishes original scientific papers on kinetics, mechanisms, studies of scales from structural and morphological viewpoints, transport properties in scales, phase-boundary reactions, and much more. Articles may discuss both theoretical and experimental work related to gas-solid reactions at the surface or near-surface of a material exposed to elevated temperatures, including reactions with oxygen, nitrogen, sulfur, carbon and halogens. In addition, Oxidation of Metals publishes the results of frontier research concerned with deposit-induced attack. Review papers and short technical notes are encouraged.
期刊最新文献
Advanced Concepts of Cellular Automata Modeling of Microstructure-Controlled Internal Oxidation Screening of Materials in NaCl–MgCl2 at 600 °C: A Comparative Study Leading to a New Corrosion-Resistance Criterion Compared SIMS and NanoSIMS Analyses of Duplex Oxide Layers Growth After Sequential Oxidation Tests Using Oxygen Isotope Tracers The Effect of Microstructure and Surface Finish on the High Temperature Oxidation of Laser Powder Bed Fused IN625 High Temperature Oxidation Behavior of Haynes 214 Superalloy and the Influence of Yttrium Element
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1