Demonstration of ferroelectricity in PLD grown HfO2-ZrO2 nanolaminates

IF 1.4 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY AIMS Materials Science Pub Date : 2023-01-01 DOI:10.3934/matersci.2023018
Sree Sourav Das, Zach Fox, Md Dalim Mia, B. C. Samuels, R. Saha, R. Droopad
{"title":"Demonstration of ferroelectricity in PLD grown HfO2-ZrO2 nanolaminates","authors":"Sree Sourav Das, Zach Fox, Md Dalim Mia, B. C. Samuels, R. Saha, R. Droopad","doi":"10.3934/matersci.2023018","DOIUrl":null,"url":null,"abstract":"<abstract> <p>Ferroelectricity is demonstrated for the first time in Si(100)/SiO<sub>2</sub>/TiN/HfO<sub>2</sub>-ZrO<sub>2</sub>/TiN stack using pulsed laser deposition (PLD) and the effects of temperatures, partial oxygen pressures, and thickness for the stabilization of the ferroelectric phase were mapped. Thin films deposited at a higher temperature and a higher oxygen partial pressure have a higher thickness, demonstrating a better ferroelectric response with ~12 μC/cm<sup>2</sup> remnant polarization, a leakage current of 10<sup>−7</sup> A (at 8 V) and endurance > 10<sup>11</sup> cycles indicative of an orthorhombic crystal phase. In contrast, thin films deposited at lower temperatures and pressures does not exhibit ferroelectric behavior. These films can be attributed to having a dominant monoclinic phase, having lower grain size and increased leakage current. Finally, the effects of ZrO<sub>2</sub> as top and bottom layer were also investigated which showed that ZrO<sub>2</sub> as the top layer provided better mechanical confinement for stabilizing the orthorhombic phase instead of as the bottom layer.</p> </abstract>","PeriodicalId":7670,"journal":{"name":"AIMS Materials Science","volume":"1 1","pages":""},"PeriodicalIF":1.4000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"AIMS Materials Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3934/matersci.2023018","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Ferroelectricity is demonstrated for the first time in Si(100)/SiO2/TiN/HfO2-ZrO2/TiN stack using pulsed laser deposition (PLD) and the effects of temperatures, partial oxygen pressures, and thickness for the stabilization of the ferroelectric phase were mapped. Thin films deposited at a higher temperature and a higher oxygen partial pressure have a higher thickness, demonstrating a better ferroelectric response with ~12 μC/cm2 remnant polarization, a leakage current of 10−7 A (at 8 V) and endurance > 1011 cycles indicative of an orthorhombic crystal phase. In contrast, thin films deposited at lower temperatures and pressures does not exhibit ferroelectric behavior. These films can be attributed to having a dominant monoclinic phase, having lower grain size and increased leakage current. Finally, the effects of ZrO2 as top and bottom layer were also investigated which showed that ZrO2 as the top layer provided better mechanical confinement for stabilizing the orthorhombic phase instead of as the bottom layer.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
PLD生长的HfO2-ZrO2纳米层合物的铁电性证明
利用脉冲激光沉积(PLD)技术首次在Si(100)/SiO2/TiN/HfO2-ZrO2/TiN叠层中证明了铁电性,并绘制了温度、氧分压和厚度对铁电相稳定的影响。在较高的温度和氧分压下沉积的薄膜具有较高的厚度,具有较好的铁电响应,残余极化为~12 μC/cm2,漏电流为10−7 a (8 V),续航时间为> 1011次,表明其为正交晶相。相反,在较低温度和压力下沉积的薄膜不表现出铁电行为。这些薄膜的主要特点是单斜相,晶粒尺寸较小,漏电流增大。最后,对ZrO2作为顶层和底层的影响进行了研究,结果表明ZrO2作为顶层比作为底层对稳定正交相提供了更好的机械约束。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
AIMS Materials Science
AIMS Materials Science MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
3.60
自引率
0.00%
发文量
33
审稿时长
4 weeks
期刊介绍: AIMS Materials Science welcomes, but not limited to, the papers from the following topics: · Biological materials · Ceramics · Composite materials · Magnetic materials · Medical implant materials · New properties of materials · Nanoscience and nanotechnology · Polymers · Thin films.
期刊最新文献
Effect of sub-zero treatments on hardness and corrosion properties of low-alloy nickel steel Self-healing properties of augmented injectable hydrogels over time Analysis of the folding behavior of a paperboard subjected to indentation of a deviated creasing rule using the finite element method Characterization of the mechanical properties and thermal conductivity of epoxy-silica functionally graded materials Demonstration of ferroelectricity in PLD grown HfO2-ZrO2 nanolaminates
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1