Photo Catalytic Oxidation Degradation of Volatile Organic Compound with Nano-TiO2/LDPE Composite Film

K. Suwannahong, Wipada Sanongra, J. Kruenate, S. Phibanchon, S. Jawjit, W. Khamwichit
{"title":"Photo Catalytic Oxidation Degradation of Volatile Organic Compound with Nano-TiO2/LDPE Composite Film","authors":"K. Suwannahong, Wipada Sanongra, J. Kruenate, S. Phibanchon, S. Jawjit, W. Khamwichit","doi":"10.5281/ZENODO.1071105","DOIUrl":null,"url":null,"abstract":"The photocatalytic activity efficiency of TiO2 for the degradation of Toluene in photoreactor can be enhanced by nanoTiO2/LDPE composite film. Since the amount of TiO2 affected the efficiency of the photocatalytic activity, this work was mainly concentrated on the effort to embed the high amount of TiO2 in the Polyethylene matrix. The developed photocatalyst was characterized by XRD, UV-Vis spectrophotometer and SEM. The SEM images revealed the high homogeneity of the deposition of TiO2 on the polyethylene matrix. The XRD patterns interpreted that TiO2 embedded in the PE matrix exhibited mainly in anatase form. In addition, the photocatalytic results show that the toluene removal efficiencies of 30±5%, 49±4%, 68±5%, 42±6% and 33±5% were obtained when using the catalyst loading at 0%, 10%, 15%, 25% and 50% (wt. cat./wt. film), respectively. Keywords—Photocatalytic oxidation, Toluene, nano-TiO2/LDPE composite film.","PeriodicalId":23701,"journal":{"name":"World Academy of Science, Engineering and Technology, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering","volume":"145 1","pages":"65-69"},"PeriodicalIF":0.0000,"publicationDate":"2013-01-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"World Academy of Science, Engineering and Technology, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5281/ZENODO.1071105","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

Abstract

The photocatalytic activity efficiency of TiO2 for the degradation of Toluene in photoreactor can be enhanced by nanoTiO2/LDPE composite film. Since the amount of TiO2 affected the efficiency of the photocatalytic activity, this work was mainly concentrated on the effort to embed the high amount of TiO2 in the Polyethylene matrix. The developed photocatalyst was characterized by XRD, UV-Vis spectrophotometer and SEM. The SEM images revealed the high homogeneity of the deposition of TiO2 on the polyethylene matrix. The XRD patterns interpreted that TiO2 embedded in the PE matrix exhibited mainly in anatase form. In addition, the photocatalytic results show that the toluene removal efficiencies of 30±5%, 49±4%, 68±5%, 42±6% and 33±5% were obtained when using the catalyst loading at 0%, 10%, 15%, 25% and 50% (wt. cat./wt. film), respectively. Keywords—Photocatalytic oxidation, Toluene, nano-TiO2/LDPE composite film.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
纳米tio2 /LDPE复合膜光催化氧化降解挥发性有机化合物
纳米TiO2/LDPE复合膜可提高TiO2在光反应器中降解甲苯的光催化活性。由于TiO2的含量会影响光催化活性的效率,因此本工作主要集中在将大量TiO2嵌入聚乙烯基体上。采用XRD、UV-Vis分光光度计和SEM对所制备的光催化剂进行了表征。SEM图像显示TiO2在聚乙烯基体上的沉积具有较高的均匀性。XRD分析表明,TiO2主要以锐钛矿形式包埋在PE基体中。此外,光催化结果表明,当催化剂负载为0%、10%、15%、25%和50% (wt. cat./wt.)时,甲苯去除率分别为30±5%、49±4%、68±5%、42±6%和33±5%。电影),分别。关键词:光催化氧化,甲苯,纳米tio2 /LDPE复合膜
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Electron-beam Initiated Polymerization of Elemental Phosphorus Study Of Using Bentonite – Poly Ethylene Glycol Composite for Metal Removal from Water Captan: Problems Associated with its Identification in Environmental Materials and Food Products. Potential Solutions Effect of Oligomers and Polymers of Ethylene Glycols on Micellar Characteristics of Aqueous Solutions of Sodium Pentadectyl Sulfonate Interfacial Evolution of WC-Co/AISI 304L Diffusion Bonded Joint Obtained by Flash SPS Technique
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1