Preparation of Paper Mulberry Fibers and Possibility of Cotton/Paper Mulberry Yarns Production

M. Jitjaicham, Boonsri Kusuktham
{"title":"Preparation of Paper Mulberry Fibers and Possibility of Cotton/Paper Mulberry Yarns Production","authors":"M. Jitjaicham, Boonsri Kusuktham","doi":"10.1155/2016/1498967","DOIUrl":null,"url":null,"abstract":"The novelty of yarn production from cotton/paper mulberry fiber blends was reported. The objective of this research was to prepare the paper mulberry fibers and study the possibility of production of yarns from cotton/paper mulberry fibers. For preparation of paper mulberry fibers, the inner bark was first immersed in water for 24 h. Then, the fibers were treated with sodium hydroxide at concentration of 5–10% (w/v) for 1–3 h. After that, the bleaching process was conducted with hydrogen peroxide at concentration of 5–25% (v/v) for different temperature and time. Finally, the fibers were washed with 10% (v/v) of nonionic surfactant at temperature of 90°C for 30 minute to remove the residual gum from the fibers. The results showed that optimum condition for scouring of the paper mulberry fibers was 15% (w/v) sodium hydroxide at 90°C for 2 h. The bleaching process with 15% (v/v) H2O2 at 90°C for 90 minute was suitable. The obtained fibers were blended with the cotton fibers to produce yarns by open-end spinning method. The % elongation and tenacity of the blended yarns increased with the increasing of the paper mulberry ratio. Also, the antifungal property of yarns was improved by the blending of cotton fibers with the paper mulberry fibers.","PeriodicalId":13278,"journal":{"name":"Indian Journal of Materials Science","volume":"7 1","pages":"1-6"},"PeriodicalIF":0.0000,"publicationDate":"2016-08-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Indian Journal of Materials Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1155/2016/1498967","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6

Abstract

The novelty of yarn production from cotton/paper mulberry fiber blends was reported. The objective of this research was to prepare the paper mulberry fibers and study the possibility of production of yarns from cotton/paper mulberry fibers. For preparation of paper mulberry fibers, the inner bark was first immersed in water for 24 h. Then, the fibers were treated with sodium hydroxide at concentration of 5–10% (w/v) for 1–3 h. After that, the bleaching process was conducted with hydrogen peroxide at concentration of 5–25% (v/v) for different temperature and time. Finally, the fibers were washed with 10% (v/v) of nonionic surfactant at temperature of 90°C for 30 minute to remove the residual gum from the fibers. The results showed that optimum condition for scouring of the paper mulberry fibers was 15% (w/v) sodium hydroxide at 90°C for 2 h. The bleaching process with 15% (v/v) H2O2 at 90°C for 90 minute was suitable. The obtained fibers were blended with the cotton fibers to produce yarns by open-end spinning method. The % elongation and tenacity of the blended yarns increased with the increasing of the paper mulberry ratio. Also, the antifungal property of yarns was improved by the blending of cotton fibers with the paper mulberry fibers.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
纸桑纤维的制备及棉/纸桑纱线生产的可能性
报道了棉/纸桑混纺制纱的新颖性。本研究的目的是制备纸桑纤维,并研究用棉/纸桑纤维生产纱线的可能性。为了制备纸桑纤维,首先将内皮浸入水中24h。然后用浓度为5-10% (w/v)的氢氧化钠处理1-3 h。然后用浓度为5-25% (v/v)的双氧水进行不同温度和时间的漂白。最后,用10% (v/v)的非离子表面活性剂在90℃下洗涤30分钟,去除纤维上残留的胶质。结果表明,对纸桑纤维进行精练的最佳条件为15% (w/v)的氢氧化钠,在90℃下浸泡2 h。以15% (v/v) H2O2在90℃下漂白90 min为宜。将得到的纤维与棉纤维用开端纺丝法混纺成纱。随着纸桑比的增加,混纺纱的伸长率和强力均有所提高。同时,将棉纤维与纸桑纤维混纺,提高了纱线的抗真菌性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
On the Mechanical Properties of Hybrid Aluminium 7075 Matrix Composite Material Reinforced with SiC and TiC Produced by Powder Metallurgy Method Process to Improve the Adherences of Copper to a PTFE Plate Preparation of Paper Mulberry Fibers and Possibility of Cotton/Paper Mulberry Yarns Production Three-Dimensional Unsteady State Temperature Distribution of Thin Rectangular Plate with Moving Point Heat Source Experimental Evaluation and Characterization of Electron Beam Welding of 2219 AL-Alloy
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1