Selective patterning of indium tin oxide films using 1064 nm laser for micro parts processing

Abstract

We report the experimental and analysis results of micro parts processing using 1064 nm Nd:YVO4 laser direct-write micro patterning of indium tin oxide (ITO) thin films and then followed by electroforming on the patterns. Compared with conventional photolithographic and etching technologies, direct-write micro-patterns of ITO using Nd:YVO4 laser at proper control can achieve high quality of surface without requiring numerous processing steps. Using diffractive multiple Nd:YVO4 beam, the ITO thin film could be removed without any damage to the glass structure. After laser patterning, a high overlapping area of laser spot was used to pattern the electrode layer on film surface for obtaining a fine ablated edge profile. Accordingly, the micro parts can be obtained using electroforming and release process via laser-patterned ITO films. The new micro parts processing is a maskless, dry and low-cost process instead of the complex photolithography, sputtering and sacrificial layer.