OPTIMIZATION OF STEEL AND TIMBER HALL STRUCTURES

Abstract

The paper deals with the optimization of single-storey hall structures consisting of the same main frames to which steel purlins, façade rails and façade columns are connected. The frames can be steel or timber portal frames. While the steel frames are made of steel I-sections, the timber frames are made of glulam with rectangular cross-sections. The hall structure is optimized using mixed-integer nonlinear programming (MINLP), a combined continuous-discrete optimization technique. MINLP optimization is performed in three steps. It starts with defining the hall superstructure, modelling the optimization model of the structure, and solving the defined optimization problem. The superstructure includes all discrete alternatives of topologies, standard dimensions and material qualities competing for a feasible and optimal result. The optimization model includes continuous and discrete binary variables. The continuous variables represent dimensions, cross-sections, material grades, loads, etc., while the binary variables are used to optimize the topology of the structure and to select standard dimensions/profiles and material grades. The objective function of the material cost of the structure is subject to a system of (in)equality constraints of structural analysis and dimensioning. The dimensioning constraints are defined according to the Eurocode regulations. In order to solve the defined optimization problem, the modified outer-approximation/equality-relaxation (OA/ER) algorithm was used. A numerical example of MINLP optimization of a steel and timber frame hall structure is presented at the end of the article. nonlinear The frames may be made of steel profiles or glulam. The optimization of the hall structure is performed using mixed-integer non-linear programming, MINLP. The objective function of the material cost of the structure is subject to a system of (in)equality constraints of statics and dimensioning. The modified outer-approximation/equality-relaxation algorithm (OA/ER) is applied to solve the optimization problem. The computer program MYPSIN is used. In addition to the determined minimal material cost of the structure, the optimal topology of the hall structure, the strength classes of the materials used, the standard steel profiles, and the discrete/rounded cross-sections of the glulam frames and of the concrete foundations are calculated.