Determination of fluorescence lifetimes of fluorescein from fluorescence quenching data

A. Ogunsipe, O. Opeolu
{"title":"Determination of fluorescence lifetimes of fluorescein from fluorescence quenching data","authors":"A. Ogunsipe, O. Opeolu","doi":"10.14419/ijac.v8i1.29995","DOIUrl":null,"url":null,"abstract":"The fluorescence quenching of fluorescein by 1,4-benzoquinone (BQ) in five solvents – methanol, ethanol, phosphate buffer saline (PBS, pH 7.4), N,N'-dimethylformamide (DMF) and dimethylsulphoxide (DMSO) is hereby investigated. Fluorescein’s fluorescence was effectively quenched by BQ, and the quenching was dynamic (purely collisional) within the BQ’s concentration range (0.001 to 0.004 M) used in this work. Accordingly, the quenching data were in conformity with the Stern-Volmer’s model. Stern-Volmer’s constant (KSV) values range between 17.4 in DMSO and 43.4 in methanol. KSV values, together with the calculated bimolecular rate constants (kD) in the respective solvents, were used to semi-empirically estimate the fluorescence lifetimes (tF) of fluorescein in the individual solvents. Just as for KSV values, tF values are solvent-viscosity dependent, with the lowest values being obtained in methanol and the highest in DMSO, which are the least and most viscous solvents respectively. tF values obtained in this work are 3.55, 3.71, 3.78, 4.13 and 4.51 ns (in methanol, PBS 7.4, ethanol, DMF and DMSO, respectively).   ","PeriodicalId":13723,"journal":{"name":"International Journal of Advanced Chemistry","volume":"1 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Advanced Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14419/ijac.v8i1.29995","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

The fluorescence quenching of fluorescein by 1,4-benzoquinone (BQ) in five solvents – methanol, ethanol, phosphate buffer saline (PBS, pH 7.4), N,N'-dimethylformamide (DMF) and dimethylsulphoxide (DMSO) is hereby investigated. Fluorescein’s fluorescence was effectively quenched by BQ, and the quenching was dynamic (purely collisional) within the BQ’s concentration range (0.001 to 0.004 M) used in this work. Accordingly, the quenching data were in conformity with the Stern-Volmer’s model. Stern-Volmer’s constant (KSV) values range between 17.4 in DMSO and 43.4 in methanol. KSV values, together with the calculated bimolecular rate constants (kD) in the respective solvents, were used to semi-empirically estimate the fluorescence lifetimes (tF) of fluorescein in the individual solvents. Just as for KSV values, tF values are solvent-viscosity dependent, with the lowest values being obtained in methanol and the highest in DMSO, which are the least and most viscous solvents respectively. tF values obtained in this work are 3.55, 3.71, 3.78, 4.13 and 4.51 ns (in methanol, PBS 7.4, ethanol, DMF and DMSO, respectively).   
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
荧光猝灭法测定荧光素的荧光寿命
本文研究了1,4-苯醌(BQ)在甲醇、乙醇、磷酸盐缓冲盐水(PBS, pH 7.4)、N,N'-二甲基甲酰胺(DMF)和二甲基亚砜(DMSO)五种溶剂中荧光素的荧光猝灭。荧光素的荧光被BQ有效猝灭,且猝灭在本研究使用的BQ浓度范围(0.001 ~ 0.004 M)内为动态猝灭(纯碰撞猝灭)。因此,淬火数据符合Stern-Volmer模型。斯特恩-沃尔默常数(KSV)值在DMSO中为17.4,在甲醇中为43.4。KSV值,连同计算的双分子速率常数(kD)在各自的溶剂中,用于半经验地估计荧光素在各个溶剂中的荧光寿命(tF)。与KSV值一样,tF值也与溶剂粘度有关,在甲醇中得到的值最低,在DMSO中得到的值最高,这两种溶剂分别是粘度最低和最高的溶剂。本文得到的tF值分别为3.55、3.71、3.78、4.13和4.51 ns(分别在甲醇、PBS 7.4、乙醇、DMF和DMSO中)。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Assessment of seasonal variations of some heavy metals in water samples collected from Gwaigwaye, Maska and Zobe dams Transforming sugarcane bagasse into zeolitic material: a sustainable approach to wastewater treatment Studies Studies on the phytochemicals of clove and their biological activities Elastic wave speeds, Debye temperature and microhardness of YX3 (X = In, Sn, Tl and Pb) intermetallic compounds Some physical properties of K2TlAsX6 (X = Cl, Br) and CsPbBr3 semiconducting compounds
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1