Single-Walled Carbon Nanotube (SWCNT) thin films via automatic spray coating and nitric acid vapor treatment

IF 0.9 4区 工程技术 Q3 ENGINEERING, MULTIDISCIPLINARY Journal of Engineering Research Pub Date : 2024-12-01 DOI:10.1016/j.jer.2023.07.002
Arulampalam Kunaraj , P. Chelvanathan , Ahmad Ashrif A Bakar , Iskandar Yahya
{"title":"Single-Walled Carbon Nanotube (SWCNT) thin films via automatic spray coating and nitric acid vapor treatment","authors":"Arulampalam Kunaraj ,&nbsp;P. Chelvanathan ,&nbsp;Ahmad Ashrif A Bakar ,&nbsp;Iskandar Yahya","doi":"10.1016/j.jer.2023.07.002","DOIUrl":null,"url":null,"abstract":"<div><div>In the realm of optoelectronics to produce thin film, SWCNT (Single-Walled Carbon Nanotube) is a promising alternative to Indium Tin Oxide (ITO). However, it is still challenging to manufacture SWCNT thin film that is low-cost, homogenous and has minimal sheet resistance. In this work, SWCNT thin films were deposited by using the automated spray coating method. To enhance the film quality and optoelectronic characteristics, post-deposition treatment through nitric acid vapor was carried out. The optimized SWCNT thin films exhibited optical transparency in the range of 60.4% at 800 nm and sheet resistance of 6.6 Ω/square. The sheet resistance of our fabricated SWCNT thin films was lower than the value of ITO films (10 Ω/square), putting forth evidence which suggests the potential of SWCNTs as an alternative to ITO.</div></div>","PeriodicalId":48803,"journal":{"name":"Journal of Engineering Research","volume":"12 4","pages":"Pages 825-831"},"PeriodicalIF":0.9000,"publicationDate":"2024-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Engineering Research","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2307187723001621","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

In the realm of optoelectronics to produce thin film, SWCNT (Single-Walled Carbon Nanotube) is a promising alternative to Indium Tin Oxide (ITO). However, it is still challenging to manufacture SWCNT thin film that is low-cost, homogenous and has minimal sheet resistance. In this work, SWCNT thin films were deposited by using the automated spray coating method. To enhance the film quality and optoelectronic characteristics, post-deposition treatment through nitric acid vapor was carried out. The optimized SWCNT thin films exhibited optical transparency in the range of 60.4% at 800 nm and sheet resistance of 6.6 Ω/square. The sheet resistance of our fabricated SWCNT thin films was lower than the value of ITO films (10 Ω/square), putting forth evidence which suggests the potential of SWCNTs as an alternative to ITO.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
单壁碳纳米管(SWCNT)薄膜的自动喷涂和硝酸蒸汽处理
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Engineering Research
Journal of Engineering Research ENGINEERING, MULTIDISCIPLINARY-
CiteScore
1.60
自引率
10.00%
发文量
181
审稿时长
20 weeks
期刊介绍: Journal of Engineering Research (JER) is a international, peer reviewed journal which publishes full length original research papers, reviews, case studies related to all areas of Engineering such as: Civil, Mechanical, Industrial, Electrical, Computer, Chemical, Petroleum, Aerospace, Architectural, Biomedical, Coastal, Environmental, Marine & Ocean, Metallurgical & Materials, software, Surveying, Systems and Manufacturing Engineering. In particular, JER focuses on innovative approaches and methods that contribute to solving the environmental and manufacturing problems, which exist primarily in the Arabian Gulf region and the Middle East countries. Kuwait University used to publish the Journal "Kuwait Journal of Science and Engineering" (ISSN: 1024-8684), which included Science and Engineering articles since 1974. In 2011 the decision was taken to split KJSE into two independent Journals - "Journal of Engineering Research "(JER) and "Kuwait Journal of Science" (KJS).
期刊最新文献
Investigation of optimal feature for milling chatter identification using supervised machine learning techniques Prediction of tensile strength of biochar filled polylactic acid composites via box-behnken design Single-Walled Carbon Nanotube (SWCNT) thin films via automatic spray coating and nitric acid vapor treatment Experimental studies on performance and emission measures of a 4-stroke compression ignition engine using palm bio-diesel blended with N-butanol Performance evaluation of turbulent circular heat exchanger with a novel flow deflector-type baffle plate
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1