Motion Planning and Tracking Trajectory of an Autonomous Emergency Braking Pedestrian (AEB-P) System Based on Different Brake Pad Friction Coefficients on Dry Road Surface

A. Zulkifli, M. H. Peeie, M. A. Zakaria, M. I. Ishak, M.A. Shahrom, B. Kujunni
{"title":"Motion Planning and Tracking Trajectory of an Autonomous Emergency Braking Pedestrian (AEB-P) System Based on Different Brake Pad Friction Coefficients on Dry Road Surface","authors":"A. Zulkifli, M. H. Peeie, M. A. Zakaria, M. I. Ishak, M.A. Shahrom, B. Kujunni","doi":"10.15282/ijame.19.3.2022.12.0772","DOIUrl":null,"url":null,"abstract":"Accidents between vehicles and pedestrians usually occur when a pedestrian is crossing the road. An Autonomous Emergency Braking Pedestrian (AEB-P) is introduced to prevent collisions between vehicles and pedestrians. However, the performance of an AEB-P will be reduced when the brake pad is worn out on a dry road. In this study, the motion planning, namely Vehicle Conditional Artificial Potential Field (VC-APF), including a warning signal and emergency brake phase that generate the vehicle’s deceleration, is proposed to analyze the effect of brake pad on the AEB-P performance. Then, the vehicle’s deceleration is tracked by the tracking trajectory, where the PI controller is adapted to provide the optimum braking force. The function of PI control is to ensure the vehicle’s deceleration is approaching the desired deceleration. The performance of the proposed method has been simulated on the dry road surface with different brake pad coefficients; 0.4, 0.35, and 0.24. The simulation results show that the vehicle manages to stop colliding with a pedestrian on the dry road surface at the minimum safety distance range of 2.7-2.9 meters.","PeriodicalId":13935,"journal":{"name":"International Journal of Automotive and Mechanical Engineering","volume":null,"pages":null},"PeriodicalIF":1.0000,"publicationDate":"2022-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Automotive and Mechanical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.15282/ijame.19.3.2022.12.0772","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 1

Abstract

Accidents between vehicles and pedestrians usually occur when a pedestrian is crossing the road. An Autonomous Emergency Braking Pedestrian (AEB-P) is introduced to prevent collisions between vehicles and pedestrians. However, the performance of an AEB-P will be reduced when the brake pad is worn out on a dry road. In this study, the motion planning, namely Vehicle Conditional Artificial Potential Field (VC-APF), including a warning signal and emergency brake phase that generate the vehicle’s deceleration, is proposed to analyze the effect of brake pad on the AEB-P performance. Then, the vehicle’s deceleration is tracked by the tracking trajectory, where the PI controller is adapted to provide the optimum braking force. The function of PI control is to ensure the vehicle’s deceleration is approaching the desired deceleration. The performance of the proposed method has been simulated on the dry road surface with different brake pad coefficients; 0.4, 0.35, and 0.24. The simulation results show that the vehicle manages to stop colliding with a pedestrian on the dry road surface at the minimum safety distance range of 2.7-2.9 meters.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于不同制动垫摩擦系数的自动紧急制动行人(AEB-P)系统在干路面上的运动规划与跟踪轨迹
车辆和行人之间的事故通常发生在行人过马路的时候。引入自动紧急制动行人系统(AEB-P),防止车辆与行人发生碰撞。然而,AEB-P的性能会降低,当刹车片磨损在干燥的道路上。本研究提出运动规划,即车辆条件人工势场(Vehicle Conditional Artificial Potential Field, VC-APF),包括预警信号和产生车辆减速的紧急制动相位,以分析刹车片对AEB-P性能的影响。然后,通过跟踪轨迹跟踪车辆的减速情况,并调整PI控制器以提供最优制动力。PI控制的作用是保证车辆的减速度接近期望的减速度。在不同刹车片系数的干路面上对该方法进行了仿真;0.4, 0.35和0.24。仿真结果表明,车辆在干燥路面上能够在2.7 ~ 2.9米的最小安全距离范围内停止与行人的碰撞。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.40
自引率
10.00%
发文量
43
审稿时长
20 weeks
期刊介绍: The IJAME provides the forum for high-quality research communications and addresses all aspects of original experimental information based on theory and their applications. This journal welcomes all contributions from those who wish to report on new developments in automotive and mechanical engineering fields within the following scopes. -Engine/Emission Technology Automobile Body and Safety- Vehicle Dynamics- Automotive Electronics- Alternative Energy- Energy Conversion- Fuels and Lubricants - Combustion and Reacting Flows- New and Renewable Energy Technologies- Automotive Electrical Systems- Automotive Materials- Automotive Transmission- Automotive Pollution and Control- Vehicle Maintenance- Intelligent Vehicle/Transportation Systems- Fuel Cell, Hybrid, Electrical Vehicle and Other Fields of Automotive Engineering- Engineering Management /TQM- Heat and Mass Transfer- Fluid and Thermal Engineering- CAE/FEA/CAD/CFD- Engineering Mechanics- Modeling and Simulation- Metallurgy/ Materials Engineering- Applied Mechanics- Thermodynamics- Agricultural Machinery and Equipment- Mechatronics- Automatic Control- Multidisciplinary design and optimization - Fluid Mechanics and Dynamics- Thermal-Fluids Machinery- Experimental and Computational Mechanics - Measurement and Instrumentation- HVAC- Manufacturing Systems- Materials Processing- Noise and Vibration- Composite and Polymer Materials- Biomechanical Engineering- Fatigue and Fracture Mechanics- Machine Components design- Gas Turbine- Power Plant Engineering- Artificial Intelligent/Neural Network- Robotic Systems- Solar Energy- Powder Metallurgy and Metal Ceramics- Discrete Systems- Non-linear Analysis- Structural Analysis- Tribology- Engineering Materials- Mechanical Systems and Technology- Pneumatic and Hydraulic Systems - Failure Analysis- Any other related topics.
期刊最新文献
Tribology Evaluation on a Four-Ball Tribometer Lubricated by Al2O3/PAG Nanolubricants Development of a Dynamic Hitch Lift Controller using a Hybrid Control Strategy in A Heavy Combination Vehicle Initial Study on Rheological Behaviour of Hydroxyapatites / Polylactic Acid Composite for 3D Printing Filament Compressive Strength and Elastic Modulus of a 3D Woven Glass/Polyester Fire-Retardant Sandwich Composite Enhancing Machining performance in Stainless Steel Machining using MXene Coolant: A Detailed Examination
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1