The influence of preparation factors on physical characteristics of chitosan nanoparticles

IF 1.2 Q3 MULTIDISCIPLINARY SCIENCES Journal of Physical Science Pub Date : 2020-11-25 DOI:10.21315/jps2020.31.3.4
Norra Shamiela Ruslan, N. Mohtar, S. S. F. Rahiman, A. M. Gazzali
{"title":"The influence of preparation factors on physical characteristics of chitosan nanoparticles","authors":"Norra Shamiela Ruslan, N. Mohtar, S. S. F. Rahiman, A. M. Gazzali","doi":"10.21315/jps2020.31.3.4","DOIUrl":null,"url":null,"abstract":"Chitosan has been shown to have great potentials in various pharmaceuticals and biomedical applications, including drug delivery. Derived from chitin abundantly available in the shells of crustaceans such as crabs and shrimps, this naturally occurring polysaccharide is classified based on its molecular weight: low, medium or high. This study aimed to explore the production of chitosan nanoparticles (NP) and the influence of different factors on the physical properties of the NP produced. These factors were the concentrations of acetic acid, chitosan flakes and tripolyphosphate (TPP). The design of experiment (DoE) approach was used to determine the optimum conditions for the production of chitosan NP, with particle size (nm) and polydispersity index (PdI) being set as the responses. The chitosan flakes were solubilised in acetic acid at a specific concentration determined by the DoE before dropwise addition of TPP in an ice bath. The mixture was stirred at room temperature and subsequently centrifuged to remove the unformed materials, and then was spray-dried into powder. The size, surface charge, shape and morphology of the particles produced were characterised and infrared analysis was conducted. The results showed that the particles were spherical, slightly positively charged (ζ-potential: +2.89 at pH 7) and the infrared analysis displayed important peaks of the chitosan NP. The DoE results showed that not all combinations of parameters could produce NP; hence, determination of concentration for each parameter is essential. The equation produced by the DoE will be a useful guide to minimise error in this circumstance. In conclusion, the acetic acid and chitosan flakes concentrations were found to influence the particle size positively, whilst the increment in TPP concentration will adversely affect the particle size. Similar pattern of response was also observed for the PdI of the particles. The methods used in this study has successfully produced spherical particles, with evidence of interactions between TPP and chitosan in the NP as shown in the infrared spectrum.","PeriodicalId":16757,"journal":{"name":"Journal of Physical Science","volume":null,"pages":null},"PeriodicalIF":1.2000,"publicationDate":"2020-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Physical Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21315/jps2020.31.3.4","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MULTIDISCIPLINARY SCIENCES","Score":null,"Total":0}
引用次数: 1

Abstract

Chitosan has been shown to have great potentials in various pharmaceuticals and biomedical applications, including drug delivery. Derived from chitin abundantly available in the shells of crustaceans such as crabs and shrimps, this naturally occurring polysaccharide is classified based on its molecular weight: low, medium or high. This study aimed to explore the production of chitosan nanoparticles (NP) and the influence of different factors on the physical properties of the NP produced. These factors were the concentrations of acetic acid, chitosan flakes and tripolyphosphate (TPP). The design of experiment (DoE) approach was used to determine the optimum conditions for the production of chitosan NP, with particle size (nm) and polydispersity index (PdI) being set as the responses. The chitosan flakes were solubilised in acetic acid at a specific concentration determined by the DoE before dropwise addition of TPP in an ice bath. The mixture was stirred at room temperature and subsequently centrifuged to remove the unformed materials, and then was spray-dried into powder. The size, surface charge, shape and morphology of the particles produced were characterised and infrared analysis was conducted. The results showed that the particles were spherical, slightly positively charged (ζ-potential: +2.89 at pH 7) and the infrared analysis displayed important peaks of the chitosan NP. The DoE results showed that not all combinations of parameters could produce NP; hence, determination of concentration for each parameter is essential. The equation produced by the DoE will be a useful guide to minimise error in this circumstance. In conclusion, the acetic acid and chitosan flakes concentrations were found to influence the particle size positively, whilst the increment in TPP concentration will adversely affect the particle size. Similar pattern of response was also observed for the PdI of the particles. The methods used in this study has successfully produced spherical particles, with evidence of interactions between TPP and chitosan in the NP as shown in the infrared spectrum.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
制备因素对壳聚糖纳米颗粒物理特性的影响
壳聚糖在各种药物和生物医学应用中具有巨大的潜力,包括给药。这种天然存在的多糖是从螃蟹和虾等甲壳类动物的壳中大量存在的几丁质中提取出来的,根据分子量分为低、中、高。本研究旨在探讨壳聚糖纳米颗粒(NP)的制备及不同因素对制备的NP物理性质的影响。影响因素为乙酸浓度、壳聚糖片浓度和三聚磷酸盐浓度。以壳聚糖的粒径(nm)和多分散性指数(PdI)为考察指标,采用实验设计法确定了壳聚糖NP的最佳生产条件。将壳聚糖薄片以DoE确定的特定浓度溶于乙酸中,然后在冰浴中滴加TPP。将混合物在室温下搅拌,然后离心去除未成形的物质,然后喷雾干燥成粉末。对所制备颗粒的大小、表面电荷、形状和形貌进行了表征,并进行了红外分析。结果表明,壳聚糖颗粒呈球形,微带正电(pH = 7时ζ电位为+2.89),红外光谱分析显示壳聚糖NP的重要峰。DoE结果表明,并非所有的参数组合都能产生NP;因此,确定每个参数的浓度是必要的。在这种情况下,美国能源部提出的方程式将是一个有用的指南,可以最大限度地减少误差。综上所述,乙酸和壳聚糖的浓度对粒径有积极影响,而TPP浓度的增加对粒径有不利影响。对于颗粒的PdI也观察到类似的响应模式。本研究中使用的方法已经成功地产生了球形颗粒,并在红外光谱中显示了TPP和壳聚糖在NP中的相互作用的证据。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Physical Science
Journal of Physical Science Physics and Astronomy-Physics and Astronomy (all)
CiteScore
1.70
自引率
0.00%
发文量
19
期刊介绍: The aim of the journal is to disseminate latest scientific ideas and findings in the field of physical sciences among scientists in Malaysia and international regions. This journal is devoted to the publication of articles dealing with research works in Chemistry, Physics and Engineering. Review articles will also be considered. Manuscripts must be of scientific value and will be submitted to independent referees for review. Contributions must be written in English and must not have been published elsewhere.
期刊最新文献
Investigate the Electrical and Structural Characteristics of the Si-ZnO Diode Transient Heat Transfer Analysis in Metal Plates with Variable Thickness Impact of Alpha Rays on the Optoelectronic Properties of Epoxy Resin Thick Films Blend Cellulose Acetate Butyrate Membrane with Molecular Weight 12,000, 30,000 and 65,000 for CO2/N2 Separation The Effect of Carbonisation Heating Rates on the Properties of N-Doped Teak Sawdust Waste Activated Carbon
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1