CFD Calculations of Moderator Heat and Fluid Flow of Small Modular Heavy Water Reactor

Abstract

The heavy water reactor concept Teplator is a pressure channel type reactor with independent systems for the primary coolant and the moderator. The present study analyses the low-pressure moderator cooling system of Teplator during full-power operation. The moderator is heated from neutron thermalization, gamma rays absorption, fission product decay and decay of activation products. Additionally, heat transfer from the coolant channels has to be taken in the analyses of the moderator cooling system. Preliminary thermal-hydraulic analyses of the cooling system are supplemented by CFD simulations of heat and fluid flow in the moderator's vessel, emphasizing flow-type regimes. Results from CFD simulations showed that the buoyancy-dominated flow (case MF-22) resulted in a higher thermal stratification and high moderator temperature close to the upper plate of the moderator vessel. The inertia-dominated flow regime MF-90 resulted in good mixing of the moderator and a low thermal stratification in the vessel. Finally, the mid-mass flow rate regime MF-45 was identified as a transitional region from a buoyancy-dominated to a mix-type regime.