Commissioning of L-band intense electron linac for industrial applications

S. Kim, H.R. Yang, M. Cho, W. Namkung, S. Jang, S.J. Kwon, Y. Son, S. Park, J. Oh
{"title":"Commissioning of L-band intense electron linac for industrial applications","authors":"S. Kim, H.R. Yang, M. Cho, W. Namkung, S. Jang, S.J. Kwon, Y. Son, S. Park, J. Oh","doi":"10.1109/PLASMA.2008.4590859","DOIUrl":null,"url":null,"abstract":"An intense L-band electron linear accelerator is under construction at CESC (Cheorwon Electron-beam Service Center) for industrial applications. It is capable of producing 10-MeV electron beams with 30-kW average beam power. For high-power capability, we adopted 1.3 GHz, and the RF source is a 25-MW pulsed klystron with 60-kW average RF output power. The PFN-type modulator and the matched transformer provide 264-kV beam voltage with 230-A beam current to the klystron. The RF pulse length is 7 mus, and the repetition rate is 350 Hz. The thermionic E-gun generates 80-kV electron beams with pulsed 1.6 A. The pre-buncher, a single standing-wave cavity, is used before the bunching section, which is built-in with the regular accelerating section. The accelerating structure is a disk-loaded waveguide with a constant-impedance operated in the 2pi/3-mode. It is to be operated under the fully beam-loaded condition, where the beam power is maximum. The electron beams are accelerated within 6 mus since the traveling-wave filling time of the accelerating structure is almost 0.8 mus. In this paper, we present details of the accelerator system and commissioning results.","PeriodicalId":6359,"journal":{"name":"2008 IEEE 35th International Conference on Plasma Science","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE 35th International Conference on Plasma Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PLASMA.2008.4590859","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

An intense L-band electron linear accelerator is under construction at CESC (Cheorwon Electron-beam Service Center) for industrial applications. It is capable of producing 10-MeV electron beams with 30-kW average beam power. For high-power capability, we adopted 1.3 GHz, and the RF source is a 25-MW pulsed klystron with 60-kW average RF output power. The PFN-type modulator and the matched transformer provide 264-kV beam voltage with 230-A beam current to the klystron. The RF pulse length is 7 mus, and the repetition rate is 350 Hz. The thermionic E-gun generates 80-kV electron beams with pulsed 1.6 A. The pre-buncher, a single standing-wave cavity, is used before the bunching section, which is built-in with the regular accelerating section. The accelerating structure is a disk-loaded waveguide with a constant-impedance operated in the 2pi/3-mode. It is to be operated under the fully beam-loaded condition, where the beam power is maximum. The electron beams are accelerated within 6 mus since the traveling-wave filling time of the accelerating structure is almost 0.8 mus. In this paper, we present details of the accelerator system and commissioning results.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
工业用l波段强电子直线加速器的调试
铁原电子束服务中心(CESC)正在建设用于工业应用的强l波段电子直线加速器。它能够以30千瓦的平均束流功率产生10兆电子伏的电子束。对于大功率能力,我们采用1.3 GHz,射频源为25mw脉冲速调管,平均射频输出功率为60kw。pfn型调制器和匹配的变压器为速调管提供264 kv的波束电压和230 a的波束电流。射频脉冲长度为7 μ m,重复频率为350hz。热离子电子枪产生80kv的脉冲1.6 A电子束。在聚束段之前使用预聚束器,一个单驻波腔,它与常规加速段内置在一起。加速结构是一个圆盘加载波导,具有恒定阻抗,工作在2pi/3模式下。它是在全梁载条件下运行的,此时梁功率最大。由于加速结构的行波填充时间几乎为0.8 μ m,电子束在6 μ m内被加速。在本文中,我们介绍了加速器系统的细节和调试结果。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Fabrication of multi-purpose probe to investigate the influence of ohmic magnetic field on density gradient in plasma Effects of nanosecond pulsed electromagnetic field on mitochondrial membrane potential Replaceable electrodes triggered vacuum switch and its application in lightning current component A generator Visualization of instabilities in hot magnetized plasmas by ECE Imaging Numerical simulation of nonthermal atmospheric pressure plasma jet and comparison with experiments
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1