The Impact of Gas-Liquid Dispersed Flow on Heat Exchanger Performance with Improvement Using CuO Nanofluid

Abstract

Both the air-water dispersion coefficient and the air-nanofluid (CuO) dispersion coefficient were studied and measured in a double-pipe heat exchanger. Pumping air into a tank fitted with a Rushton turbulent impeller resulted in gas-liquid dispersion. In order to test the effects of varying operating conditions on the air-water and air-nanofluid dispersions, they were heated and pumped into the tube of a double-pipe heat exchanger. Reynolds numbers of Rec= 4750-13100 on the shell side and Reh=19900-64000 on the tube side were used to get the total heat transfer coefficient (Uo). The dispersion in the hot fluid tank was achieved by combining the two-phase fluids using a Rushton turbine impeller. It was discovered that the conscious phase saw a significant drop in the heat transfer coefficient when the air bubbles dissipated. Because the impeller's agitation speed affects the rate at which air bubbles are broken, the heat transfer coefficient in the case of dispersion rises as Reh and Rec rise. For all examined parameter values, CuO nanofluid showed significant heat transfer improvement. The heat transfer rate of gas-liquid dispersion increases by nanofluid by as much as 135.5% compared to gas-liquid dispersion which is considered the first attempt for heat transfer enhancement of two phase flow (gas-liquid dispersion) using Nano fluid.