Investigation of conventional diagnostic X-ray tube housing leakage radiation using ion chamber survey meter in Mizoram, India

Abstract

Leakage radiation that transmitted the protected X-ray tube housing was measured and compared with national and international safety standard. To the best of the authors’ knowledge, no tube housing leakage measurement has been done so far in the present study area. The authors considered all the conventional diagnostic X-ray units in Mizoram, India. Ion chamber survey meter was used to measure leakage radiation and it was placed at 5 different positions (left, right, front, back, top) of the X-ray tube. Measurements were done at 1 m focus-to-detector distance by projecting X-ray tube vertically downward with collimator diaphragms closed completely. SPSS statistics for windows, version 17.0 (SPSS, Inc., Chicago, IL, USA) was used to derived mean, standard error of the mean etc. The tube housing leakage exposure rates ranged between 0.03 mRh-1 and 500 mR h-1; among the 5 positions, rate measured in the front direction has the highest mean at 41.61±8.63 mR h-1; whereas the top has the lowest 4.57±1.16 mRh-1. Tube housing radiation level ranged from 0.01 to 58 mR in one hour. Leakage radiation was minimum at the top position of the tube and maximum in the front direction. All the equipment were in compliance with national and international standard norms, the highest leakage radiation level was 50.43% of the safety limit.