COMPARISON OF POTENTIAL ENVIRONMENTAL IMPACTS ON THE PRODUCTION AND USE OF HIGH AND LOW SULFUR REGULAR DIESEL BY LIFE CYCLE ASSESSMENT

A. Martínez-González, Oscar-Mauricio Casas-Leuro, Julia-Raquel Acero-Reyes, E. Castillo-Monroy
{"title":"COMPARISON OF POTENTIAL ENVIRONMENTAL IMPACTS ON THE PRODUCTION AND USE OF HIGH AND LOW SULFUR REGULAR DIESEL BY LIFE CYCLE ASSESSMENT","authors":"A. Martínez-González, Oscar-Mauricio Casas-Leuro, Julia-Raquel Acero-Reyes, E. Castillo-Monroy","doi":"10.29047/01225383.233","DOIUrl":null,"url":null,"abstract":"This paper provides a comparative analysis using the concept of life cycle assessment (LCA), between highsulfur (3 000 ppm) and low-sulfur diesel (500 ppm) diesel. The comparative LCA considers the stages of production, transport and oil refining, as well as the transport of refined products and their respective end use. This last stage of the life cycle is important for the analysis of potential environmental impacts, due to sulfur oxide (SOX) emissions, which contribute to the formation of acid rain, damage air quality and the ecosystem (land and water acidification), causing gradual damage to human health and the environment. Therefore, comparative LCA identifies critical points from the environmental perspective, weighing the contributions of pollutants (NO2, CH4 and CO2) known as greenhouse gases (GHG) and criteria pollutants (CO, SOX, NOXw, VOC's and PM). Simapro 7,2® was used to simulate and evaluate potential environmental impacts generated during the production and use by end consumers of the two fossil fuels. In order to evaluate the impact categories, two methods available in said calculation tool were selected: the first is the IPCC-2007 (GWP-100 years), which estimates the carbon footprint and the contributions of each stage of the production chain to the \"Global Warming\" effect. The second method of evaluation is the Impact 2002+, which assesses the various contributions to the categories of toxicity to \"Human Health\", \"Ecosystem Quality\", \"Climate Change\" and \"Depletion of Natural Resources\". Thus, the preliminary results of comparative LCA show a slight increase in the carbon footprint (total emissions of CO2 equivalent in the productive chain) of low-sulfur diesel, approximately 3,8% compared to high-sulfur diesel, as a result of the increased emissions generated by the operation of the hydrogenation plant. However, low-sulfur diesel achieves a significant reduction of about 80% in comparison with high-sulfur diesel, in terms of damage to \"Human Health\" and \"Ecosystem Quality\". On the contrary, there was an increase of 2% and 6% in the categories of \"Climate Change\" and \"Depletion of Natural Resources\", respectively. Finally, despite the minor increase in the carbon footprint, although with remarkable reductions in \"Ecosystem Quality\" and \"Human Health\", the production and use of low-sulfur diesel has a single score of environmental impact equivalent to 0,23 milli points (mPt) compared to the single score obtained by high-sulfur diesel of 1,23 (mPt).","PeriodicalId":10235,"journal":{"name":"Ciencia Tecnologia y Futuro","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2011-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"10","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ciencia Tecnologia y Futuro","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.29047/01225383.233","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 10

Abstract

This paper provides a comparative analysis using the concept of life cycle assessment (LCA), between highsulfur (3 000 ppm) and low-sulfur diesel (500 ppm) diesel. The comparative LCA considers the stages of production, transport and oil refining, as well as the transport of refined products and their respective end use. This last stage of the life cycle is important for the analysis of potential environmental impacts, due to sulfur oxide (SOX) emissions, which contribute to the formation of acid rain, damage air quality and the ecosystem (land and water acidification), causing gradual damage to human health and the environment. Therefore, comparative LCA identifies critical points from the environmental perspective, weighing the contributions of pollutants (NO2, CH4 and CO2) known as greenhouse gases (GHG) and criteria pollutants (CO, SOX, NOXw, VOC's and PM). Simapro 7,2® was used to simulate and evaluate potential environmental impacts generated during the production and use by end consumers of the two fossil fuels. In order to evaluate the impact categories, two methods available in said calculation tool were selected: the first is the IPCC-2007 (GWP-100 years), which estimates the carbon footprint and the contributions of each stage of the production chain to the "Global Warming" effect. The second method of evaluation is the Impact 2002+, which assesses the various contributions to the categories of toxicity to "Human Health", "Ecosystem Quality", "Climate Change" and "Depletion of Natural Resources". Thus, the preliminary results of comparative LCA show a slight increase in the carbon footprint (total emissions of CO2 equivalent in the productive chain) of low-sulfur diesel, approximately 3,8% compared to high-sulfur diesel, as a result of the increased emissions generated by the operation of the hydrogenation plant. However, low-sulfur diesel achieves a significant reduction of about 80% in comparison with high-sulfur diesel, in terms of damage to "Human Health" and "Ecosystem Quality". On the contrary, there was an increase of 2% and 6% in the categories of "Climate Change" and "Depletion of Natural Resources", respectively. Finally, despite the minor increase in the carbon footprint, although with remarkable reductions in "Ecosystem Quality" and "Human Health", the production and use of low-sulfur diesel has a single score of environmental impact equivalent to 0,23 milli points (mPt) compared to the single score obtained by high-sulfur diesel of 1,23 (mPt).
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
用生命周期评价方法比较高、低硫普通柴油生产和使用的潜在环境影响
本文利用生命周期评估(LCA)的概念,对高硫柴油(3000 ppm)和低硫柴油(500 ppm)进行了比较分析。比较LCA考虑了生产、运输和炼油阶段,以及精炼产品的运输和各自的最终用途。生命周期的最后阶段对于分析硫氧化物(SOX)排放对环境的潜在影响很重要,硫氧化物有助于形成酸雨,破坏空气质量和生态系统(土地和水酸化),对人类健康和环境造成逐渐损害。因此,比较LCA从环境角度确定临界点,权衡被称为温室气体(GHG)的污染物(NO2、CH4和CO2)和标准污染物(CO、SOX、nox、VOC和PM)的贡献。Simapro 7,2®用于模拟和评估这两种化石燃料的最终消费者在生产和使用过程中产生的潜在环境影响。为了评估影响类别,选择了上述计算工具中可用的两种方法:第一种是IPCC-2007 (GWP-100年),它估计了碳足迹和生产链每个阶段对“全球变暖”效应的贡献。第二种评价方法是《2002+影响》,它评估了对"人类健康"、"生态系统质量"、"气候变化"和"自然资源耗竭"等毒性类别的各种贡献。因此,比较LCA的初步结果显示,低硫柴油的碳足迹(生产链中二氧化碳当量的总排放量)略有增加,与高硫柴油相比,约为3.8%,这是加氢厂运行产生的排放量增加的结果。然而,在对“人体健康”和“生态系统质量”的损害方面,低硫柴油比高硫柴油显著减少约80%。相反,“气候变化”和“自然资源枯竭”类别分别增加了2%和6%。最后,尽管碳足迹略有增加,但“生态系统质量”和“人类健康”显著减少,与高硫柴油获得的1,23毫分(mPt)的单分相比,低硫柴油的生产和使用具有相当于0.23毫分(mPt)的环境影响单分。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Assessment of reducing sugars production from agro-industrial wastes by batch and semicontinuous subcritical water hydrolysis CFD simulation of HPAM EOR solutions mechanical degradation by restrictions in turbulent flow Petrofacies and diagenetic processes of la Victoria formation (Early Miocene), Dina oil field, upper Magdalena valley basin, Colombia. Demand-side management strategies based on energy key perfomance indicators in real-time: Case study Gas transport at dense phase conditions for the development of deepwater fields in the Colombian Caribbean sea
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1