GAS LIFT OPTIMIZATION OF A MATURE WELL IN NIGER DELTA, NIGERIA USING INCOMPLETE DATASET: A CASE STUDY

O. Eyankware, Idaereesoari Harriet Ateke, Okonta Nnamdi Joseph
{"title":"GAS LIFT OPTIMIZATION OF A MATURE WELL IN NIGER DELTA, NIGERIA USING INCOMPLETE DATASET: A CASE STUDY","authors":"O. Eyankware, Idaereesoari Harriet Ateke, Okonta Nnamdi Joseph","doi":"10.26480/gwk.01.2020.15.18","DOIUrl":null,"url":null,"abstract":"Well DEF, a well located in Niger Delta region of Nigeria was shut down for 7 years. On gearing towards re-starting production, different options such as installation of gas lift mechanism, servicing and installation of packers and valves were evaluated for possibility of increasing well fluid productivity. Hence, this research was focused on optimizing well fluid productivity using PROSPER through installation of continuous gas lift mechanism on an existing well using incomplete dataset; in addition, the work evaluated effect of gas injection rates, wellhead pressure, water cut and gas gravity on efficiency of the artificial lift mechanism for improved well fluid production. Results of the study showed that optimum gas injection rate of 0.6122 MMscf/day produced well fluid production of 264.28 STB/day which is lower than pristine production rate (266 STB/day) of the well. Also, increment in wellhead pressure resulted in decrease in well production, increase in water cut facilitated reduction in well fluid productivity while gas gravity is inversely proportional to well fluid productivity. Based on results obtained, authors concluded that Well DEF does not require gaslift mechanism hence, valves and parkers need to be re-serviced and re-installed for sustained well fluid.","PeriodicalId":32518,"journal":{"name":"Engineering Heritage Journal","volume":"7 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Heritage Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.26480/gwk.01.2020.15.18","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Well DEF, a well located in Niger Delta region of Nigeria was shut down for 7 years. On gearing towards re-starting production, different options such as installation of gas lift mechanism, servicing and installation of packers and valves were evaluated for possibility of increasing well fluid productivity. Hence, this research was focused on optimizing well fluid productivity using PROSPER through installation of continuous gas lift mechanism on an existing well using incomplete dataset; in addition, the work evaluated effect of gas injection rates, wellhead pressure, water cut and gas gravity on efficiency of the artificial lift mechanism for improved well fluid production. Results of the study showed that optimum gas injection rate of 0.6122 MMscf/day produced well fluid production of 264.28 STB/day which is lower than pristine production rate (266 STB/day) of the well. Also, increment in wellhead pressure resulted in decrease in well production, increase in water cut facilitated reduction in well fluid productivity while gas gravity is inversely proportional to well fluid productivity. Based on results obtained, authors concluded that Well DEF does not require gaslift mechanism hence, valves and parkers need to be re-serviced and re-installed for sustained well fluid.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用不完整数据集对尼日利亚尼日尔三角洲某成熟井进行气举优化:一个案例研究
DEF井位于尼日利亚尼日尔三角洲地区,已停产7年。在准备重新启动生产时,评估了不同的方案,如安装气举机构、维修和安装封隔器和阀门,以提高油井流体产能的可能性。因此,本研究的重点是通过在现有的不完整数据井上安装连续气举机制,利用PROSPER优化井的流体产能;此外,还评价了注气量、井口压力、含水率和含气比重对人工举升机制效率的影响,以提高井液产量。研究结果表明,当注气量为0.6122 MMscf/d时,该井的产液量为264.28 STB/d,低于该井的原始产量(266 STB/d)。井口压力的增加会导致油井产量的下降,含水率的增加会导致井筒流体产能的降低,而气重力与井筒流体产能成反比。根据所获得的结果,作者得出结论,DEF井不需要气举机制,因此需要重新维修和重新安装阀门和停井器,以维持井液。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
审稿时长
12 weeks
期刊最新文献
INNOVATIVE PROTECTION AGAINST THE SCOUR AT OUTLETS OF CYLINDRICAL CULVERTS AND APPLICATION USING MULTI EXPRESSION PROGRAMMING TECHNIQUE (MEP) APPLICATION OF PRIMAVERA P6 SOFTWARE FOR SCHEDULING SINGLE CONSTRAINED RESOURCE IN SMALL GAS STATION PROJECT ARTISTIC ACOUSTIC PANEL RECYCLED MATERIAL FROM PLASTIC BOTTLES AND WASTE OF SAMPYAN, SAWDUST, HUSKS, STRAW FOUNDATION CHARACTERIZATION IN IKATE AREA SOUTHWESTERN NIGERIA USING ELECTRICAL RESISTIVITY TOMOGRAPHY AND CONE PENETRATION TEST VALUE ADDITION OF GRAPES USING HOT AIR DRYERS
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1