Interdiffusion coefficient and atomic mobility for fcc Ag-Cu-Mg phase at 1073 K

IF 0.9 4区 材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING Journal of Mining and Metallurgy Section B-Metallurgy Pub Date : 2022-01-01 DOI:10.2298/jmmb220926029d
Changfa Du, S.-P. Huang, Qianhui Min, Y. Liu, Shiyu Wen
{"title":"Interdiffusion coefficient and atomic mobility for fcc Ag-Cu-Mg phase at 1073 K","authors":"Changfa Du, S.-P. Huang, Qianhui Min, Y. Liu, Shiyu Wen","doi":"10.2298/jmmb220926029d","DOIUrl":null,"url":null,"abstract":"In this work, the interdiffusion coefficient and atomic mobility for fcc Ag-Cu-Mg phase at 1073 K have been investigated by combining diffusion couple experiments and calculations. Based on the experimental composition profiles, the diffusion coefficients at intersection points in diffusion paths were calculated by means of Matano-Kirkaldy method. Using the thermodynamic descriptions available in literature, the atomic mobilities for fcc Ag-Cu-Mg phase were automatically optimized by numerical inverse method incorporated in the CALTPP (CALculation of ThermoPhysical Properties) program. Moreover, the obtained atomic mobilities were verified to be reliable through good agreements between the model-simulated composition profiles and the measured ones. In addition, three-dimensional surfaces for the interdiffusion coefficient, activation energy, and frequency factor were presented. The presently obtained atomic mobilities can be incorporated into the diffusion database for Ag-based alloys, which can contribute to microstructure simulation and materials design.","PeriodicalId":51090,"journal":{"name":"Journal of Mining and Metallurgy Section B-Metallurgy","volume":"3 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Mining and Metallurgy Section B-Metallurgy","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.2298/jmmb220926029d","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, the interdiffusion coefficient and atomic mobility for fcc Ag-Cu-Mg phase at 1073 K have been investigated by combining diffusion couple experiments and calculations. Based on the experimental composition profiles, the diffusion coefficients at intersection points in diffusion paths were calculated by means of Matano-Kirkaldy method. Using the thermodynamic descriptions available in literature, the atomic mobilities for fcc Ag-Cu-Mg phase were automatically optimized by numerical inverse method incorporated in the CALTPP (CALculation of ThermoPhysical Properties) program. Moreover, the obtained atomic mobilities were verified to be reliable through good agreements between the model-simulated composition profiles and the measured ones. In addition, three-dimensional surfaces for the interdiffusion coefficient, activation energy, and frequency factor were presented. The presently obtained atomic mobilities can be incorporated into the diffusion database for Ag-based alloys, which can contribute to microstructure simulation and materials design.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
1073 K时fcc Ag-Cu-Mg相的相互扩散系数和原子迁移率
本文采用扩散偶实验和计算相结合的方法,研究了fcc Ag-Cu-Mg相在1073 K时的相互扩散系数和原子迁移率。根据实验组成曲线,采用Matano-Kirkaldy方法计算扩散路径交点处的扩散系数。利用已有的热力学描述,利用CALTPP(计算热物理性质)程序中的数值反演方法自动优化了fcc Ag-Cu-Mg相的原子迁移率。此外,通过模型模拟的组成曲线与测量值之间的良好一致性,验证了得到的原子迁移率是可靠的。此外,还给出了相互扩散系数、活化能和频率因子的三维曲面。目前得到的原子迁移率可用于银基合金的扩散数据库,为合金的微观结构模拟和材料设计提供依据。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.00
自引率
40.00%
发文量
19
审稿时长
2 months
期刊介绍: University of Belgrade, Technical Faculty in Bor, has been publishing the journal called Journal of Mining and Metallurgy since 1965 and in 1997 it was divided in two independent journals dealing with mining and metallurgy separately. Since 2009 Journal of Mining and Metallurgy, Section B: Metallurgy has been accepted in Science Citation Index Expanded. Journal of Mining and Metallurgy, Section B: Metallurgy presents an international medium for the publication of contributions on original research which reflect the new progresses in theory and practice of metallurgy. The Journal covers the latest research in all aspects of metallurgy including hydrometallurgy, pyrometallurgy, electrometallurgy, transport phenomena, process control, solidification, mechanical working, solid state reactions, materials processing, surface treatment and relationships among processing, structure, and properties of materials.
期刊最新文献
The melting performance of high alumina blast furnace slags Recovery of Li, Mn, and Fe from LiFePO4/LiMn2O4 mixed waste lithium-ion battery cathode materials Modeling of partial reduction of hematite with carbon-monoxide in tunnel furnace Study on the drying characteristics of green pellets of ultrafine iron ore concentrate Effect of extrusion process on the stress corrosion cracking resistance of 7N01 aluminum alloy
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1