Sampling and concentration of polycyclic aromatic hydrocarbons from exhaust gases from a plant for synthesis of carbon nanomaterials

S. M. Leschev, T. Henarava
{"title":"Sampling and concentration of polycyclic aromatic hydrocarbons from exhaust gases from a plant for synthesis of carbon nanomaterials","authors":"S. M. Leschev, T. Henarava","doi":"10.33581/2520-257x-2021-2-62-73","DOIUrl":null,"url":null,"abstract":"Currently, there is an increase in the production of carbon nanomaterials in the world, which is associated with their unique physical and mechanical properties and their use in various fields of science, industry and technology. Investigation of the chemical composition of waste gases from a propane-butane mixture pyrolysis unit during the synthesis of carbon nanomaterials is of scientific and applied value, since it allows one to study both the chemistry of the pyrolysis process of hydrocarbon mixtures and determine the degree of toxicity of waste gas from pyrolysis units. The quantitative determination of polycyclic aromatic hydrocarbons in the gaseous products of pyrolysis of a propane-butane mixture during the synthesis of carbon nanomaterials has shown that when sampling with a small amount of the Supelpak-2 adsorbent, which is widely used in international and domestic methods, efficient capture of multinuclear aromatic hydrocarbons is not ensured. Therefore, an important research issue is the development of a simple and effective method for sampling polycyclic aromatic hydrocarbons with their subsequent GC-MS analysis. The principal essence of the technique is the impregnation of two fiberglass filters with an organic low-volatile solvent – diethylene glycol, tetraethylene glycol or dimethyl sulfoxide. The latter is characterised by the highest extracting power in relation to polycyclic aromatic hydrocarbons. The developed technique makes it possible to increase the efficiency of capturing multinuclear aromatic hydrocarbons (with four or more rings in a molecule) to 96–98 % compared to a solid adsorbent under equal conditions (pyrolysis conditions, weight of adsorbent equal with filters impregnated with a solvent), where the degree of their extraction is 1–5 %. The established values of the degree of recovery of the measured components are explained by the high extracting ability of dimethyl sulfoxide in relation to multinuclear aromatic hydrocarbons.","PeriodicalId":17303,"journal":{"name":"Journal of the Belarusian State University. Chemistry","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Belarusian State University. Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.33581/2520-257x-2021-2-62-73","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Currently, there is an increase in the production of carbon nanomaterials in the world, which is associated with their unique physical and mechanical properties and their use in various fields of science, industry and technology. Investigation of the chemical composition of waste gases from a propane-butane mixture pyrolysis unit during the synthesis of carbon nanomaterials is of scientific and applied value, since it allows one to study both the chemistry of the pyrolysis process of hydrocarbon mixtures and determine the degree of toxicity of waste gas from pyrolysis units. The quantitative determination of polycyclic aromatic hydrocarbons in the gaseous products of pyrolysis of a propane-butane mixture during the synthesis of carbon nanomaterials has shown that when sampling with a small amount of the Supelpak-2 adsorbent, which is widely used in international and domestic methods, efficient capture of multinuclear aromatic hydrocarbons is not ensured. Therefore, an important research issue is the development of a simple and effective method for sampling polycyclic aromatic hydrocarbons with their subsequent GC-MS analysis. The principal essence of the technique is the impregnation of two fiberglass filters with an organic low-volatile solvent – diethylene glycol, tetraethylene glycol or dimethyl sulfoxide. The latter is characterised by the highest extracting power in relation to polycyclic aromatic hydrocarbons. The developed technique makes it possible to increase the efficiency of capturing multinuclear aromatic hydrocarbons (with four or more rings in a molecule) to 96–98 % compared to a solid adsorbent under equal conditions (pyrolysis conditions, weight of adsorbent equal with filters impregnated with a solvent), where the degree of their extraction is 1–5 %. The established values of the degree of recovery of the measured components are explained by the high extracting ability of dimethyl sulfoxide in relation to multinuclear aromatic hydrocarbons.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
从碳纳米材料合成厂的废气中取样和浓缩多环芳烃
目前,世界上碳纳米材料的产量不断增加,这与它们独特的物理和机械性能及其在科学、工业和技术各个领域的应用有关。研究碳纳米材料合成过程中丙烷-丁烷混合热解装置废气的化学组成,既可以研究烃类混合物热解过程的化学性质,又可以确定热解装置废气的毒性程度,具有一定的科学价值和应用价值。对碳纳米材料合成过程中丙烷-丁烷混合物热解气态产物中多环芳烃的定量测定表明,当使用少量国际国内广泛使用的Supelpak-2吸附剂取样时,无法保证对多核芳烃的有效捕获。因此,开发一种简单有效的方法对多环芳烃进行气相色谱-质谱分析是一个重要的研究课题。该技术的主要精髓是用有机低挥发性溶剂——二甘醇、四甘醇或二甲亚砜——浸渍两个玻璃纤维过滤器。后者的特点是相对于多环芳烃提取率最高。与固体吸附剂在相同条件下(热解条件下,吸附剂的重量与浸有溶剂的过滤器相等)的萃取度为1 - 5%相比,开发的技术使捕获多核芳香烃(分子中有四个或更多环)的效率提高到96 - 98%成为可能。二甲基亚砜对多核芳烃的高萃取能力解释了所测组分回收率的确定值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Thermostable heat-insulating composite materials based on hollow microspheres and solid phosphate binders: development and research Phase composition and local environment of iron ions in gadolinium-doped iron oxide nanoparticles Synthesis, structure and characterisation of late transition metal complexes with 2-(tetrazol-1-yl)pyridine Green chemistry teaching: Belarusian view through world tendencies Synthesis and luminescent properties of strontium aluminates activated with bismuth ions
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1