Measurement of contact impedance of electrodes used for deep brain stimulation

Abstract

High frequency electrical stimulation by means of electrodes implanted into the brain has become an accepted technique for treatment of Parkinson's disease. The electrical field distribution normally inserted into the sub thalamic nucleus minimise abnormal brain activity. Square wave pulses of 1–3.6 V with duration of 60–90 μs at a frequency range of 130–185 pps are generally used. Every electrode unit consists of four cylindrical electrodes positioned in a row and can be switched on independently. This paper determines the contact impedance of the electrodes for different frequencies and proposes improvement to reduce the contact impedance between the electrodes and the brain. Measurements were performed by placing the electrodes in a tank filled with saline. Different frequencies were applied on two electrodes via a resistor. The current was measured through the resistor and the voltage was registered between one of the electrodes and a third non current carrying electrode. The obtained values were used to calculate the contact impedance. The result shows large contact impedance for the used frequency compared to the impedance of the treated tissue, which means that variation in contact impedance can result in variation in the electrical field applied to the tissue.