CO2 -Foam Fracturing With Methanol Successfully Stimulates Canyon Gas Sand

J. Craft, S. Waddell, D. G. Mcfatridge
{"title":"CO2 -Foam Fracturing With Methanol Successfully Stimulates Canyon Gas Sand","authors":"J. Craft, S. Waddell, D. G. Mcfatridge","doi":"10.2118/20119-PA","DOIUrl":null,"url":null,"abstract":"Successful stimulation using CO{sub 2} foam with methanol has revived the economically marginal Canyon gas-sand reservoir of Sterling County, TX. Field experience in the Conger (Penn) field demonstrated that CO{sub 2} foam (1) lessened the water required in the fluid and (2) provided a gas assist to help remove water and lower interfacial tension (IFT). The low pH of the fluid, combined with additional clay stabilization, iron control, and enhanced water recovery additives, proved helpful in initial well response and subsequent performances. Since the CO{sub 2}-foam fracture treatments were administered, production from Sterling County Canyon gas sands met or surpassed initial rates, even though formation pressure in the field declined 33.2%. Stimulation is essential for commercial production in these sands. However, water blockage, caused by stimulation, was encountered in designing an effective completion technique for a tight formation with reduced bottomhole pressure (HBP). Production in tight, low-pressure gas wells can be completely blocked if formation pressure does not exceed the capillary pressure increase caused by injected fracture fluid. Original stimulation techniques consisted mainly of gelled-water fracture treatments containing 65,000 lbm of 20/40-mesh sand with a maximum concentration of 2 1/2 lbm/gal. In many cases, several weeks of swabbing were requiredmore » to ensure continuous flow. After the fracture treatments, about 40% water recovery was realized throughout the field. This paper discusses CO{sub 2}-foam fracture treatments and job design and presents case histories from several Conger (Penn) field CO{sub 2}-foam fracture treatments.« less","PeriodicalId":22020,"journal":{"name":"Spe Production Engineering","volume":"44 1","pages":"219-225"},"PeriodicalIF":0.0000,"publicationDate":"1992-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Spe Production Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/20119-PA","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 7

Abstract

Successful stimulation using CO{sub 2} foam with methanol has revived the economically marginal Canyon gas-sand reservoir of Sterling County, TX. Field experience in the Conger (Penn) field demonstrated that CO{sub 2} foam (1) lessened the water required in the fluid and (2) provided a gas assist to help remove water and lower interfacial tension (IFT). The low pH of the fluid, combined with additional clay stabilization, iron control, and enhanced water recovery additives, proved helpful in initial well response and subsequent performances. Since the CO{sub 2}-foam fracture treatments were administered, production from Sterling County Canyon gas sands met or surpassed initial rates, even though formation pressure in the field declined 33.2%. Stimulation is essential for commercial production in these sands. However, water blockage, caused by stimulation, was encountered in designing an effective completion technique for a tight formation with reduced bottomhole pressure (HBP). Production in tight, low-pressure gas wells can be completely blocked if formation pressure does not exceed the capillary pressure increase caused by injected fracture fluid. Original stimulation techniques consisted mainly of gelled-water fracture treatments containing 65,000 lbm of 20/40-mesh sand with a maximum concentration of 2 1/2 lbm/gal. In many cases, several weeks of swabbing were requiredmore » to ensure continuous flow. After the fracture treatments, about 40% water recovery was realized throughout the field. This paper discusses CO{sub 2}-foam fracture treatments and job design and presents case histories from several Conger (Penn) field CO{sub 2}-foam fracture treatments.« less
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
甲醇- CO2泡沫压裂成功开采峡谷气砂
使用CO{sub 2}泡沫与甲醇的成功增产措施使德克萨斯州Sterling County的Canyon气砂储层恢复了经济效益。在Conger (Penn)油田的现场经验表明,CO{sub 2}泡沫(1)减少了流体中所需的水,(2)提供了气体辅助,有助于去除水并降低界面张力(IFT)。事实证明,低pH流体,再加上额外的粘土稳定剂、铁控制剂和提高采收率的添加剂,有助于提高初始井响应和随后的性能。由于实施了CO{sub 2}泡沫压裂,尽管地层压力下降了33.2%,但Sterling County Canyon气砂的产量达到或超过了初始产量。增产对于这些砂岩的商业生产至关重要。然而,在为降低井底压力(HBP)的致密地层设计有效完井技术时,遇到了由增产措施引起的水堵塞问题。如果地层压力不超过注入压裂液引起的毛管压力增加,致密、低压气井的生产可能会完全堵塞。最初的增产技术主要是胶凝水压裂,其中含有65,000 lbm的20/40目砂,最大浓度为2.5 lbm/gal。在许多情况下,需要数周的抽汲以确保连续流动。经过压裂处理后,整个油田的采收率约为40%。本文讨论了CO{sub 2}泡沫压裂处理和作业设计,并介绍了几个较长(Penn)油田CO{sub 2}泡沫压裂处理的案例。«少
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Phase splitting of wet steam in annular flow through a horizontal impacting tee Corrosion performance of welded CRA-lined pipes for flowlines Breaker concentrations required to improve the permeability of proppant packs damaged by concentrated linear and borate-crosslinked fracturing fluids Incorporation of 2D fluid flow into a pseudo-3D hydraulic fracturing simulator Application of curable resin-coated proppants
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1