{"title":"Clothing Effect on Multilayered Skin Model Exposure From 20 GHz to 100 GHz","authors":"Kun Li;Kensuke Sasaki;Giulia Sacco;Maxim Zhadobov","doi":"10.1109/JERM.2023.3309935","DOIUrl":null,"url":null,"abstract":"This study presents a statistical assessment of clothed human skin model exposure from 20 to 100 GHz. Dielectric property data for two typical textile materials, i.e., cotton and wool, were provided for the first time over the entire frequency range. A statistical analysis of the ratio of absorbed power density (APD) to skin temperature elevation was performed by Monte Carlo simulations using a multi-layer skin model with a textile layer. Three key parameters, namely the angle of incidence, cross-polarization power ratio (\n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n), and air gap spacing between cloth and skin surface, were considered in the dosimetry analysis. The results show that at an incidence angle up to 60\n<inline-formula><tex-math>$^\\circ$</tex-math></inline-formula>\n, fluctuations of the ratio are observed by varying \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n from \n<inline-formula><tex-math>$-$</tex-math></inline-formula>\n50 to 50 dB. In the 20–100 GHz range, when the \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n is less than 0 dB, i.e., horizontally polarized wave is dominant, the impact on the ratio caused by either the incident angle or the air gap spacing is marginal. The deviation is increased when \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n exceeds 0 dB, i.e., vertically polarized wave is dominant, especially above 60 GHz at the incidence angles above 60\n<inline-formula><tex-math>$^\\circ$</tex-math></inline-formula>\n.","PeriodicalId":29955,"journal":{"name":"IEEE Journal of Electromagnetics RF and Microwaves in Medicine and Biology","volume":"7 4","pages":"408-415"},"PeriodicalIF":3.0000,"publicationDate":"2023-09-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Journal of Electromagnetics RF and Microwaves in Medicine and Biology","FirstCategoryId":"1085","ListUrlMain":"https://ieeexplore.ieee.org/document/10242065/","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
Abstract
This study presents a statistical assessment of clothed human skin model exposure from 20 to 100 GHz. Dielectric property data for two typical textile materials, i.e., cotton and wool, were provided for the first time over the entire frequency range. A statistical analysis of the ratio of absorbed power density (APD) to skin temperature elevation was performed by Monte Carlo simulations using a multi-layer skin model with a textile layer. Three key parameters, namely the angle of incidence, cross-polarization power ratio (
$\bm {XPR}$
), and air gap spacing between cloth and skin surface, were considered in the dosimetry analysis. The results show that at an incidence angle up to 60
$^\circ$
, fluctuations of the ratio are observed by varying
$\bm {XPR}$
from
$-$
50 to 50 dB. In the 20–100 GHz range, when the
$\bm {XPR}$
is less than 0 dB, i.e., horizontally polarized wave is dominant, the impact on the ratio caused by either the incident angle or the air gap spacing is marginal. The deviation is increased when
$\bm {XPR}$
exceeds 0 dB, i.e., vertically polarized wave is dominant, especially above 60 GHz at the incidence angles above 60
$^\circ$
.