A Numerical Investigation of Rider Injury Risks During Falls Caused by E-Scooter-Stopper Impacts.

Abstract

Within the past decade, injuries caused by electric scooter (e-scooter) crashes have significantly increased. A primary cause is front wheel collisions with a vertical surface such as a curb or object, generically referred to as a "stopper." In this study, various e-scooter-stopper crashes were simulated numerically across different impact speeds, approach angles, and stopper heights to characterize the influence of crash type on rider injury risk during falls. A finite element (FE) model of a standing Hybrid III anthropomorphic test device was used as the rider model after being calibrated against certification test data. Additionally, an FE model of an e-scooter was developed based on reconstructed scooter geometry. Forty-five FE simulations were run to investigate various e-scooter crash scenarios. Test parameters included impact speed (from 3.2 m/s to 11.16 m/s), approach angle (30 deg to 90 deg), and stopper height (52 mm, 101 mm, and 152 mm). Additionally, the perpendicular (90 deg) impact scenarios were run twice: once with Hybrid-III arm activation to mimic a rider attempting to break a fall with their hands and once without this condition. Overall, the risks of serious injury to the rider varied greatly; however, roughly half the impact scenarios indicated serious risk to the rider. This was expected, as the speeds tested were in the upper 25th percentile of reported scooter speeds. The angle of approach was found to have the greatest effect on injury risk to the rider, and was shown to be positively correlated with injury risk. Smaller approach angles were shown to cause the rider to land on their side, while larger approach angles caused the rider to land on their head and chest. Additionally, arm bracing was shown to reduce the risk of serious injury in two thirds of the impact scenarios.