采用倒装片键合方法的硅微顶点检测器检测器单元的新结构和组装技术的发展

IEEE Conference on Nuclear Science Symposium and Medical Imaging Pub Date : 1992-10-25 DOI:10.1109/NSSMIC.1992.301207

Y. Saitoh, J. Yamanaka, H. Suzuki, S. Miyahara, M. Kamiya, K. Kadoi, T. Masusda, K. Maemura, M. Inoue, A. Suzuki, H. Takeuchi, M. Mandai, H. Kanazawa, Y. Higashi, H. Ikeda, S. Koike, T. Matsuda, H. Ozaki, M. Tanaka, T. Tsuboyama, S. Avrillon, S. Okuno, J. Haba, H. Hamai, S. Mori, K. Yusa

{"title":"采用倒装片键合方法的硅微顶点检测器检测器单元的新结构和组装技术的发展","authors":"Y. Saitoh, J. Yamanaka, H. Suzuki, S. Miyahara, M. Kamiya, K. Kadoi, T. Masusda, K. Maemura, M. Inoue, A. Suzuki, H. Takeuchi, M. Mandai, H. Kanazawa, Y. Higashi, H. Ikeda, S. Koike, T. Matsuda, H. Ozaki, M. Tanaka, T. Tsuboyama, S. Avrillon, S. Okuno, J. Haba, H. Hamai, S. Mori, K. Yusa","doi":"10.1109/NSSMIC.1992.301207","DOIUrl":null,"url":null,"abstract":"Full-size models of a detector unit for a silicon microvertex detector for the KEK B factory have been built. The model consists of four dummy double-sided, double-metal silicon microstrip detectors and two silicon end-boards mounted with dummy readout VLSIs on both sides. In this trial the flip-chip bonding method, using an anisotropic conductive film, is applied to both sides of the detector unit to bond 640 strips at a pitch of 50 mu m.<<ETX>>","PeriodicalId":447239,"journal":{"name":"IEEE Conference on Nuclear Science Symposium and Medical Imaging","volume":"62 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1992-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Development of novel architecture and assembly techniques for a detector unit for a silicon micro-vertex detector using the flip-chip bonding method\",\"authors\":\"Y. Saitoh, J. Yamanaka, H. Suzuki, S. Miyahara, M. Kamiya, K. Kadoi, T. Masusda, K. Maemura, M. Inoue, A. Suzuki, H. Takeuchi, M. Mandai, H. Kanazawa, Y. Higashi, H. Ikeda, S. Koike, T. Matsuda, H. Ozaki, M. Tanaka, T. Tsuboyama, S. Avrillon, S. Okuno, J. Haba, H. Hamai, S. Mori, K. Yusa\",\"doi\":\"10.1109/NSSMIC.1992.301207\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Full-size models of a detector unit for a silicon microvertex detector for the KEK B factory have been built. The model consists of four dummy double-sided, double-metal silicon microstrip detectors and two silicon end-boards mounted with dummy readout VLSIs on both sides. In this trial the flip-chip bonding method, using an anisotropic conductive film, is applied to both sides of the detector unit to bond 640 strips at a pitch of 50 mu m.<<ETX>>\",\"PeriodicalId\":447239,\"journal\":{\"name\":\"IEEE Conference on Nuclear Science Symposium and Medical Imaging\",\"volume\":\"62 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1992-10-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE Conference on Nuclear Science Symposium and Medical Imaging\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/NSSMIC.1992.301207\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Conference on Nuclear Science Symposium and Medical Imaging","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/NSSMIC.1992.301207","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 3

摘要

为KEK B工厂建立了硅微顶点探测器单元的全尺寸模型。该模型由四个假的双面双金属硅微带探测器和两个在两侧安装假读出vlsi的硅端板组成。在本试验中，使用各向异性导电膜的倒装片键合方法应用于检测器单元的两侧，以50 μ m的间距键合640条条带。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Development of novel architecture and assembly techniques for a detector unit for a silicon micro-vertex detector using the flip-chip bonding method

Full-size models of a detector unit for a silicon microvertex detector for the KEK B factory have been built. The model consists of four dummy double-sided, double-metal silicon microstrip detectors and two silicon end-boards mounted with dummy readout VLSIs on both sides. In this trial the flip-chip bonding method, using an anisotropic conductive film, is applied to both sides of the detector unit to bond 640 strips at a pitch of 50 mu m.<>

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

IEEE Conference on Nuclear Science Symposium and Medical Imaging

自引率

0.00%

发文量

期刊最新文献

Results in online data processing in the data acquisition system of the ALEPH TPC Practical evaluation of several cone beam orbits for SPECT Model based scatter correction in three dimensions (positron emission tomography) Macintosh software for simulating resolution and scatter effects in PET Testing fast ADC's at sample rates between 20 and 140 MSPS