{"title":"作为发电机运行的五相永磁同步电机的设计、参数的有限元确定及性能分析","authors":"L. Pereira, V. Canalli","doi":"10.1109/IAS.2002.1044118","DOIUrl":null,"url":null,"abstract":"The paper describes the design and parameter calculation of a five-phase permanent magnet synchronous machine intended for operation as generator connected to the load over a rectifier bridge. The main parameters and machine dimensions are determined using the finite element method in 2 dimensions. Calculated no-load induced voltage and inductances are compared with measured values obtained from a prototype machine. A circuit based mathematical model is also developed and simulated using Matlab/Simulink and the results are used to determine the machine performance as generator. The simulation results are checked versus measured values, and a good agreement between the simulation and measurements was observed. The implemented model gives results with sufficient accuracy, allowing to determine the machine behavior in early design stages. The method described here can be successfully applied for designing and performance calculation of high phase machine.","PeriodicalId":202482,"journal":{"name":"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)","volume":"101 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2002-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"13","resultStr":"{\"title\":\"Five-phase permanent magnet synchronous machine operating as generator design, parameter determination by FEM and performance\",\"authors\":\"L. Pereira, V. Canalli\",\"doi\":\"10.1109/IAS.2002.1044118\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper describes the design and parameter calculation of a five-phase permanent magnet synchronous machine intended for operation as generator connected to the load over a rectifier bridge. The main parameters and machine dimensions are determined using the finite element method in 2 dimensions. Calculated no-load induced voltage and inductances are compared with measured values obtained from a prototype machine. A circuit based mathematical model is also developed and simulated using Matlab/Simulink and the results are used to determine the machine performance as generator. The simulation results are checked versus measured values, and a good agreement between the simulation and measurements was observed. The implemented model gives results with sufficient accuracy, allowing to determine the machine behavior in early design stages. The method described here can be successfully applied for designing and performance calculation of high phase machine.\",\"PeriodicalId\":202482,\"journal\":{\"name\":\"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)\",\"volume\":\"101 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2002-12-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"13\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IAS.2002.1044118\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IAS.2002.1044118","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Five-phase permanent magnet synchronous machine operating as generator design, parameter determination by FEM and performance
The paper describes the design and parameter calculation of a five-phase permanent magnet synchronous machine intended for operation as generator connected to the load over a rectifier bridge. The main parameters and machine dimensions are determined using the finite element method in 2 dimensions. Calculated no-load induced voltage and inductances are compared with measured values obtained from a prototype machine. A circuit based mathematical model is also developed and simulated using Matlab/Simulink and the results are used to determine the machine performance as generator. The simulation results are checked versus measured values, and a good agreement between the simulation and measurements was observed. The implemented model gives results with sufficient accuracy, allowing to determine the machine behavior in early design stages. The method described here can be successfully applied for designing and performance calculation of high phase machine.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
