{"title":"现代配电系统负荷建模的深度学习方法","authors":"Musaed Mohammed, A. Abdulkarim","doi":"10.31258/jamt.3.2.1-6","DOIUrl":null,"url":null,"abstract":"Modern Power Distribution Networks (MPDNs) are no longer passive because Distributed Generations (DGs) are integrated with them to enhance system reliability and power quality. For this reason, load modeling has to be updated to capture the new dynamics of active DNs. This paper presents a composite load modeling for a grid-connected photovoltaic (PV) distribution network using the Levenberg-Marquardt algorithm in the deep learning feed-forward neural network approach. Load modeling is constructing a relationship between input excitation(s) and output response(s); it can be used for simulation studies, stability analysis, and control/protection design. A grid-connected PV distribution network was modeled in Matlab/Simulink and generates data for training and model estimation. The estimated model was tested and validated using a laboratory experimental test bed. Results of the model exhibit a good fitness of 99.8% and 97.2% in active and reactive power models respectively during training. While 97.84% and 94.65% respectively were obtained during testing. The estimation errors were found to be 0.0025 and 0.0049 for active and reactive powers respectively with 0.0473 and 0.0701 corresponding errors in testing.","PeriodicalId":287674,"journal":{"name":"Journal of Applied Materials and Technology","volume":"5 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A Deep-Learning Approach to Load Modeling in Modern Power Distribution System\",\"authors\":\"Musaed Mohammed, A. Abdulkarim\",\"doi\":\"10.31258/jamt.3.2.1-6\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Modern Power Distribution Networks (MPDNs) are no longer passive because Distributed Generations (DGs) are integrated with them to enhance system reliability and power quality. For this reason, load modeling has to be updated to capture the new dynamics of active DNs. This paper presents a composite load modeling for a grid-connected photovoltaic (PV) distribution network using the Levenberg-Marquardt algorithm in the deep learning feed-forward neural network approach. Load modeling is constructing a relationship between input excitation(s) and output response(s); it can be used for simulation studies, stability analysis, and control/protection design. A grid-connected PV distribution network was modeled in Matlab/Simulink and generates data for training and model estimation. The estimated model was tested and validated using a laboratory experimental test bed. Results of the model exhibit a good fitness of 99.8% and 97.2% in active and reactive power models respectively during training. While 97.84% and 94.65% respectively were obtained during testing. The estimation errors were found to be 0.0025 and 0.0049 for active and reactive powers respectively with 0.0473 and 0.0701 corresponding errors in testing.\",\"PeriodicalId\":287674,\"journal\":{\"name\":\"Journal of Applied Materials and Technology\",\"volume\":\"5 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-09-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Applied Materials and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.31258/jamt.3.2.1-6\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Materials and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31258/jamt.3.2.1-6","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
现代配电网络(Power Distribution network, mpdn)不再是被动的,因为它集成了分布式代(Distributed generation, dg),提高了系统的可靠性和电能质量。出于这个原因,必须更新负载建模,以捕获活动DNs的新动态。本文采用深度学习前馈神经网络方法中的Levenberg-Marquardt算法对并网光伏配电网进行了复合负荷建模。负载建模是建立输入激励和输出响应之间的关系;它可以用于仿真研究,稳定性分析和控制/保护设计。在Matlab/Simulink中对并网光伏配电网进行建模,生成数据进行训练和模型估计。利用实验室实验平台对模型进行了验证。结果表明,该模型在训练过程中对有功和无功模型的适应度分别达到99.8%和97.2%。其中97.84%和94.65%为检测所得。有功功率和无功功率的估计误差分别为0.0025和0.0049,测试误差分别为0.0473和0.0701。
A Deep-Learning Approach to Load Modeling in Modern Power Distribution System
Modern Power Distribution Networks (MPDNs) are no longer passive because Distributed Generations (DGs) are integrated with them to enhance system reliability and power quality. For this reason, load modeling has to be updated to capture the new dynamics of active DNs. This paper presents a composite load modeling for a grid-connected photovoltaic (PV) distribution network using the Levenberg-Marquardt algorithm in the deep learning feed-forward neural network approach. Load modeling is constructing a relationship between input excitation(s) and output response(s); it can be used for simulation studies, stability analysis, and control/protection design. A grid-connected PV distribution network was modeled in Matlab/Simulink and generates data for training and model estimation. The estimated model was tested and validated using a laboratory experimental test bed. Results of the model exhibit a good fitness of 99.8% and 97.2% in active and reactive power models respectively during training. While 97.84% and 94.65% respectively were obtained during testing. The estimation errors were found to be 0.0025 and 0.0049 for active and reactive powers respectively with 0.0473 and 0.0701 corresponding errors in testing.