Temperature-Aware Floorplanning of Microarchitecture Blocks with IPC-Power Dependence Modeling and Transient Analysis

Operating temperatures have become an important concern in high performance microprocessors. Floorplanning or block-level placement offers excellent potential for thermal optimization through better heat spreading between the blocks, but these optimizations can also impact the throughput of a microarchitecture, measured in terms of the number of instructions per cycle (IPC). In nanometer technologies, global buses can have multicycle delays that depend on the positions of the blocks, and it is important for a floorplanner to be microarchitecturally-aware to be sure that thermal and IPC considerations are appropriately balanced. This paper proposes a methodology for thermally-aware microarchitecture floorplanning. The approach models the interactions between the IPC and the temperature distribution, and incorporates both factors in the floorplanning cost function. Our approach uses transient modeling and optimizes both the peak and the average temperatures, and employs a design of experiments (DOE) based strategy, which effectively captures the huge exponential search space with a small number of cycle-accurate simulations. A comparison with a technique based on previous work indicates that the proposed approach results in good reductions both in the average and the peak temperatures for a range of SPEC benchmarks