Asynchronous physical unclonable function using FPGA-based self-timed ring oscillator (abstract only)

Recently, electronic industries have been facing an increased amount of hardware counterfeits. These counterfeit components, when assembled into a product or a system, can not only jeopardize performance and reliability but also create safety issues. Physical Unclonable Function (PUF) provides means to enhance physical security of Integrated Circuits (IC) against piracy and unauthorized access. The proposed design illustrates the feasibility of using self-timed ring oscillators as a novel approach towards PUF implementation for FPGA authentication. The proposed Self-Timed Ring Oscillator PUF (STRO-PUF) consists of two groups of identically laid-out self-timed ring oscillators. Inputs to the PUF are given through a challenge generator, which selects two self-timed ring oscillators from each group. Outputs of oscillators are fed to multiplexers of corresponding groups. Self-timed ring oscillators exploit the inherent features of random process variations by producing varying frequencies. These unpredictable variations in frequencies are captured using frequency comparator, which generates a output bit. A unique set of output bits , or response is generated for each set of input bits, or challenge. This unique Challenge Response Pair (CRP) is used in identifying a particular device. Frequencies generated from these oscillators are read through a logic analyzer. The varying frequencies observed from all the oscillators mapped across different regions of FPGAs range from 16.234 MHz to 125 MHz with the average frequency of 101.446 MHz. Experimental result shows the uniqueness for the PUF response is 49.92% which is very close to the desired 50% factor.