Structure transformation of ZnO thin films properties influenced by substrate temperature deposited by magnetron sputtering

The structure transformation of ZnO thin films properties influenced by substrate temperature deposited by RF Magnetron Sputtering is presented. This project has been focused on electrical, optical and structural properties of ZnO thin films. The effect of variation substrate temperature at 200°C~500°C on the ZnO thin films have been investigated. The thin films were examined using two point probe current-voltage (I-V) measurement (Keithley 2400), UV-Vis-NIR spectrophotometer, field emmision scanning electron microscopy (FESEM) (JEOL JSM 7600F) and atomic force microscope (AFM) (Park System XE-100). ZnO thin films were prepared at 200 watt by a RF magnetron sputtering using ZnO target using glass as the substrate. The IV measurement indicated as the substrate temperature increase, the conductivity of ZnO thin film increase. All films have show high UV absorption properties using UV-VIS spectrophotometer (JASCO 670). The root means square (rms) roughness for ZnO thin film were about (<;8nm) was measured using AFM. The image form FESEM observed that transformation of structure started to change at high temperature (400~500°C).