Nila Feby Puspitasari, Hanif Al Fatta, F. W. Wibowo
{"title":"贪婪和模拟退火算法在无线接入点布局中的实现","authors":"Nila Feby Puspitasari, Hanif Al Fatta, F. W. Wibowo","doi":"10.1109/AIMS.2015.35","DOIUrl":null,"url":null,"abstract":"Optimization of the access point layout is one of the issues in the field of networking. This issue is relating to the layout of access point on the Wireless Fidelity (Wi-Fi) network that requires theoretical consideration and analysis. Because of these requirements, a good mechanism is applied in the minimizing aspects between both cost and time on the implementation of WiFi network that used by network designer to organize the layout of the access points in the proper place. In addition, the signal strength obtained by measuring of the two nodes using in SSIDer application and the parameter used to measure the signal strength is the value of RSSI (Receive Signal Strength Indication) generated by the receiver. Not only that aspects used in the implementation of optimal placement of wireless access point, but measurement of the propagation of Line of Sight (LoS) and propagation Non Line of Sight (NLoS) is also considered in the aspect of measurement. The data obtained from the measurements are used to model layout of the access point using Greedy and Simulated Annealing application which has been built and tested. The results determined by application are coverage area and the position coordinates of the wireless acces point.","PeriodicalId":121874,"journal":{"name":"2015 3rd International Conference on Artificial Intelligence, Modelling and Simulation (AIMS)","volume":"76 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":"{\"title\":\"Implementation of Greedy and Simulated Annealing Algorithms for Wireless Access Point Placement\",\"authors\":\"Nila Feby Puspitasari, Hanif Al Fatta, F. W. Wibowo\",\"doi\":\"10.1109/AIMS.2015.35\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Optimization of the access point layout is one of the issues in the field of networking. This issue is relating to the layout of access point on the Wireless Fidelity (Wi-Fi) network that requires theoretical consideration and analysis. Because of these requirements, a good mechanism is applied in the minimizing aspects between both cost and time on the implementation of WiFi network that used by network designer to organize the layout of the access points in the proper place. In addition, the signal strength obtained by measuring of the two nodes using in SSIDer application and the parameter used to measure the signal strength is the value of RSSI (Receive Signal Strength Indication) generated by the receiver. Not only that aspects used in the implementation of optimal placement of wireless access point, but measurement of the propagation of Line of Sight (LoS) and propagation Non Line of Sight (NLoS) is also considered in the aspect of measurement. The data obtained from the measurements are used to model layout of the access point using Greedy and Simulated Annealing application which has been built and tested. The results determined by application are coverage area and the position coordinates of the wireless acces point.\",\"PeriodicalId\":121874,\"journal\":{\"name\":\"2015 3rd International Conference on Artificial Intelligence, Modelling and Simulation (AIMS)\",\"volume\":\"76 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"9\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 3rd International Conference on Artificial Intelligence, Modelling and Simulation (AIMS)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/AIMS.2015.35\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 3rd International Conference on Artificial Intelligence, Modelling and Simulation (AIMS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/AIMS.2015.35","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 9
摘要
接入点布局的优化是网络领域的研究热点之一。这个问题涉及到无线保真(Wi-Fi)网络上接入点的布局,需要从理论上进行考虑和分析。由于这些要求,在WiFi网络的实现上,网络设计者在成本和时间的最小化方面运用了一种良好的机制来组织接入点在适当的位置上的布局。另外,在SSIDer应用中测量两个节点得到的信号强度,用于测量信号强度的参数为接收端产生的RSSI (Receive signal strength Indication)值。在测量方面不仅考虑了无线接入点最优放置的实现问题,还考虑了传播视线(LoS)和传播非视线(NLoS)的测量问题。利用已构建并测试的贪心和模拟退火程序,利用测量得到的数据对接入点的布局进行建模。应用确定的结果是无线接入点的覆盖区域和位置坐标。
Implementation of Greedy and Simulated Annealing Algorithms for Wireless Access Point Placement
Optimization of the access point layout is one of the issues in the field of networking. This issue is relating to the layout of access point on the Wireless Fidelity (Wi-Fi) network that requires theoretical consideration and analysis. Because of these requirements, a good mechanism is applied in the minimizing aspects between both cost and time on the implementation of WiFi network that used by network designer to organize the layout of the access points in the proper place. In addition, the signal strength obtained by measuring of the two nodes using in SSIDer application and the parameter used to measure the signal strength is the value of RSSI (Receive Signal Strength Indication) generated by the receiver. Not only that aspects used in the implementation of optimal placement of wireless access point, but measurement of the propagation of Line of Sight (LoS) and propagation Non Line of Sight (NLoS) is also considered in the aspect of measurement. The data obtained from the measurements are used to model layout of the access point using Greedy and Simulated Annealing application which has been built and tested. The results determined by application are coverage area and the position coordinates of the wireless acces point.