回收混凝土作为工业路面混凝土板的性能=回收混凝土作为工业路面混凝土板的性能

M. Morales, J. A. Pérez, M. D. Río, J. C. Sánchez, J. Casbas, D. Gil
{"title":"回收混凝土作为工业路面混凝土板的性能=回收混凝土作为工业路面混凝土板的性能","authors":"M. Morales, J. A. Pérez, M. D. Río, J. C. Sánchez, J. Casbas, D. Gil","doi":"10.20868/ADE.2018.3775","DOIUrl":null,"url":null,"abstract":"Resumen El presente estudio analiza el estado tensional de distintas placas delgadas apoyadas sobre terreno elástico empleando modelos de elementos finitos para distintos tipos de hormigones reciclados y de primer uso, distintos valores de las cargas y de las condiciones de apoyo del terreno, concluyendo que las tensiones que se obtienen en hormigones reciclados son aproximadamente un 4,5% menores que en hormigones fabricados con áridos de primer uso, en cualquiera de los casos analizados. Con los datos obtenidos para las tensiones, se han elaborado gráficas de dimensionamiento del espesor mínimo necesario en Estado Límite Último de flexión. Estas gráficas muestran menores espesores necesarios en el caso de hormigones reciclados, si bien las reducciones posibles no superan los 0,5 cm para las cargas analizadas. Otro aspecto a tener en cuenta es que, dado que el proceso de agotamiento por fatiga en el hormigón depende fundamentalmente de la máxima tensión alcanzada en el hormigón respecto de su capacidad resistente y no solo de la oscilación de tensiones, el hormigón reciclado permite alargar la vida útil de la estructura. Abstract The present study analyzes the tensional state of different thin plates supported on elastic terrain using finite element models for different types of recycled and first-use concretes, different values of loads and ground support conditions, concluding that the tensions that are obtained in recycled concretes are approximately 4.5% lower than in concrete made with aggregates of first use, in any of the cases analyzed. With the data obtained for the tensions, graphs of sizing of the minimum thickness necessary in Ultimate Limit State of flexion have been drawn up. These graphs show lower thicknesses required in the case of recycled concretes, although the possible reductions do not exceed 0.5 cm for the loads analyzed. Another aspect to be taken into account is that, given that the fatigue depletion process in concrete depends mainly on the maximum tension reached in the concrete with respect to its resistant capacity and not only the tension oscillation, the recycled concrete allows to extend the useful life of the structure.","PeriodicalId":296022,"journal":{"name":"Anales de Edificación","volume":"201 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Propiedades del hormigón reciclado para el uso como soleras de hormigón en pavimentos industriales=Properties of recycled concrete to use as concrete slabs in industrial pavements\",\"authors\":\"M. Morales, J. A. Pérez, M. D. Río, J. C. Sánchez, J. Casbas, D. Gil\",\"doi\":\"10.20868/ADE.2018.3775\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Resumen El presente estudio analiza el estado tensional de distintas placas delgadas apoyadas sobre terreno elástico empleando modelos de elementos finitos para distintos tipos de hormigones reciclados y de primer uso, distintos valores de las cargas y de las condiciones de apoyo del terreno, concluyendo que las tensiones que se obtienen en hormigones reciclados son aproximadamente un 4,5% menores que en hormigones fabricados con áridos de primer uso, en cualquiera de los casos analizados. Con los datos obtenidos para las tensiones, se han elaborado gráficas de dimensionamiento del espesor mínimo necesario en Estado Límite Último de flexión. Estas gráficas muestran menores espesores necesarios en el caso de hormigones reciclados, si bien las reducciones posibles no superan los 0,5 cm para las cargas analizadas. Otro aspecto a tener en cuenta es que, dado que el proceso de agotamiento por fatiga en el hormigón depende fundamentalmente de la máxima tensión alcanzada en el hormigón respecto de su capacidad resistente y no solo de la oscilación de tensiones, el hormigón reciclado permite alargar la vida útil de la estructura. Abstract The present study analyzes the tensional state of different thin plates supported on elastic terrain using finite element models for different types of recycled and first-use concretes, different values of loads and ground support conditions, concluding that the tensions that are obtained in recycled concretes are approximately 4.5% lower than in concrete made with aggregates of first use, in any of the cases analyzed. With the data obtained for the tensions, graphs of sizing of the minimum thickness necessary in Ultimate Limit State of flexion have been drawn up. These graphs show lower thicknesses required in the case of recycled concretes, although the possible reductions do not exceed 0.5 cm for the loads analyzed. Another aspect to be taken into account is that, given that the fatigue depletion process in concrete depends mainly on the maximum tension reached in the concrete with respect to its resistant capacity and not only the tension oscillation, the recycled concrete allows to extend the useful life of the structure.\",\"PeriodicalId\":296022,\"journal\":{\"name\":\"Anales de Edificación\",\"volume\":\"201 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-09-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Anales de Edificación\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.20868/ADE.2018.3775\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Anales de Edificación","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.20868/ADE.2018.3775","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

摘要本研究分析地面一直支持的不同板块的紧张性薄关于弹性使用有限要素模型使用不同的回收hormigones和第一、不同价值观负担和现场条件支持,最后的紧张关系在回收hormigones获得是4.5%左右的少年在hormigones用第一集,在任何情况下使用分析。利用获得的应力数据,绘制了极限弯曲状态下所需的最小厚度的尺寸图。这些图表显示了回收混凝土所需的较低厚度,尽管在分析荷载时可能减少的厚度不超过0.5厘米。另一个需要考虑的是,既然消费过程的混凝土疲劳主要取决于最高电压达到混凝土方面的能力且不能只回收压力振荡、混凝土结构可以延长寿命。Abstract目前lending study analyzes The紧张性state of thin金属板支持on elastic做法不同types of recycled and using finite element models for first-use concretes不同价值观,立即和地面支持地方that are获得第一手资料,concluding that in recycled concretes are约4.5% (lower than in具体made with总量of first use, in any of The cases analyzed。= =地理= =根据美国人口普查,这个县的总面积为,其中土地和(2.641平方公里)水。这些图显示了回收混凝土所需的较低厚度,尽管所分析的荷载可能减少的厚度不超过0.5厘米。Another监测器to be考虑轮胎is that,给予that the消耗process in具体的mainly on the maximum tension则忿忿不平的混凝土with respect to its resistant能力and not only the tension oscillation,有用的关于the recycled具体allows to扩展the life of the structure。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Propiedades del hormigón reciclado para el uso como soleras de hormigón en pavimentos industriales=Properties of recycled concrete to use as concrete slabs in industrial pavements
Resumen El presente estudio analiza el estado tensional de distintas placas delgadas apoyadas sobre terreno elástico empleando modelos de elementos finitos para distintos tipos de hormigones reciclados y de primer uso, distintos valores de las cargas y de las condiciones de apoyo del terreno, concluyendo que las tensiones que se obtienen en hormigones reciclados son aproximadamente un 4,5% menores que en hormigones fabricados con áridos de primer uso, en cualquiera de los casos analizados. Con los datos obtenidos para las tensiones, se han elaborado gráficas de dimensionamiento del espesor mínimo necesario en Estado Límite Último de flexión. Estas gráficas muestran menores espesores necesarios en el caso de hormigones reciclados, si bien las reducciones posibles no superan los 0,5 cm para las cargas analizadas. Otro aspecto a tener en cuenta es que, dado que el proceso de agotamiento por fatiga en el hormigón depende fundamentalmente de la máxima tensión alcanzada en el hormigón respecto de su capacidad resistente y no solo de la oscilación de tensiones, el hormigón reciclado permite alargar la vida útil de la estructura. Abstract The present study analyzes the tensional state of different thin plates supported on elastic terrain using finite element models for different types of recycled and first-use concretes, different values of loads and ground support conditions, concluding that the tensions that are obtained in recycled concretes are approximately 4.5% lower than in concrete made with aggregates of first use, in any of the cases analyzed. With the data obtained for the tensions, graphs of sizing of the minimum thickness necessary in Ultimate Limit State of flexion have been drawn up. These graphs show lower thicknesses required in the case of recycled concretes, although the possible reductions do not exceed 0.5 cm for the loads analyzed. Another aspect to be taken into account is that, given that the fatigue depletion process in concrete depends mainly on the maximum tension reached in the concrete with respect to its resistant capacity and not only the tension oscillation, the recycled concrete allows to extend the useful life of the structure.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Activación de la demanda de actuaciones de rehabilitación energética en edificios residenciales mediante herramienta de costes = Demand Activation for energy renovation actions in residential buildings by means of a costing tool Forjados de placa alveolar con continuidad activa mediante el uso de aleaciones con memoria de forma en base hierro = Hollow-core slab slabs with active continuity using iron-based shape memory alloys Uso de técnicas de voxelización en el tratamiento de nubes de puntos de distinto origen en entornos de edificación = Use of voxelisation techniques in the treatment of point clouds of different origin in building environments Zeroenergymod: módulos móviles habitables de energía cero en Europa = Zeroenergymod: zero energy habitable mobile modules in Europe Indicadores para medir la accesibilidad universal en edificios de vivienda plurifamiliar = Indicators for measuring universal accessibility in multi-family housing buildings
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1