{"title":"基于熔融沉积模型的聚乳酸晶格结构力学刚度实验研究","authors":"A. Eljihad, M. Nassraoui, O. Bouksour","doi":"10.5604/01.3001.0053.9491","DOIUrl":null,"url":null,"abstract":"The objective of the paper is to design and characterise with polylactic acid (PLA) material three cellular structures in the form of lattices which are diagonal-octet-centred shapes for two sizes 6x6x6 and 12x12x12 with a compression test to examine their stiffness using FDM technology compared to polyjet technology.The study used two analytical approaches to investigate lattice structures: experimental analysis and theoretical analysis. Experimental methods such as compression tests were conducted to determine the characteristics of lattice structures. In addition, theoretical analysis was conducted using Hook's law and Ashby's Gibson model to predict appropriate behaviour. The combination of experimental and theoretical methods provided a comprehensive understanding of lattice structures and their properties.The experimental study examined the impact of the shape and size of a lattice structure on the stiffness and lightness of objects 3D printed with FDM technology by PLA material. The research revealed that the 6x6x6 diagonal lattice structure size provided a good balance between stiffness and lightness. While the 6x6x6 byte structure was even lighter, with a mass ratio of 2.09 compared to the diagonal structure, it was less rigid, with a ratio of 0.43, making the diagonal structure more suitable for certain applications. The study highlights the importance of considering both the shape and size of the lattice structure when designing 3D-printed objects with specific mechanical properties; the chosen structure could be a good choice for applications where stiffness and lightness are important.The limitations of the research lie in its limited scope, focusing primarily on the effect of shape (octet-diagonal centred) and unit cell size on Young's modulus of PLA material. Other aspects of 3D printing, such as material selection and thermal properties, were not considered. Furthermore, the results obtained are specific to the printing parameters and experimental conditions chosen, which limits their generalizability to other 3D printing configurations or methods. However, these results have important implications for optimising the PLA printing process. They enable the identification of optimal parameters, such as unit cell shape and size, to produce stiffer, higher-quality structures. In addition, the research is helping to improve the mechanical properties of 3D-printed lattice parts, paving the way for more efficient manufacturing methods and stronger components.Our analysis can be used as a decision aid for the design of FDM lattice parts. Indeed, we can choose the diagonal structure of 6x6x6, which would provide favourable stiffness for functional parts.The paper explores the compression test of lattice structures using FDM technology, which presents a new direction for additive manufacturing. The study takes an experimental approach to evaluate the reliability of various additive manufacturing technologies for creating lattice structures. The study results provide insight into the most reliable technology for producing lattice structures.","PeriodicalId":14825,"journal":{"name":"Journal of Achievements in Materials and Manufacturing Engineering","volume":"27 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental investigation of mechanical stiffness in lattice structures fabricated with PLA using fused deposition modelling\",\"authors\":\"A. Eljihad, M. Nassraoui, O. Bouksour\",\"doi\":\"10.5604/01.3001.0053.9491\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The objective of the paper is to design and characterise with polylactic acid (PLA) material three cellular structures in the form of lattices which are diagonal-octet-centred shapes for two sizes 6x6x6 and 12x12x12 with a compression test to examine their stiffness using FDM technology compared to polyjet technology.The study used two analytical approaches to investigate lattice structures: experimental analysis and theoretical analysis. Experimental methods such as compression tests were conducted to determine the characteristics of lattice structures. In addition, theoretical analysis was conducted using Hook's law and Ashby's Gibson model to predict appropriate behaviour. The combination of experimental and theoretical methods provided a comprehensive understanding of lattice structures and their properties.The experimental study examined the impact of the shape and size of a lattice structure on the stiffness and lightness of objects 3D printed with FDM technology by PLA material. The research revealed that the 6x6x6 diagonal lattice structure size provided a good balance between stiffness and lightness. While the 6x6x6 byte structure was even lighter, with a mass ratio of 2.09 compared to the diagonal structure, it was less rigid, with a ratio of 0.43, making the diagonal structure more suitable for certain applications. The study highlights the importance of considering both the shape and size of the lattice structure when designing 3D-printed objects with specific mechanical properties; the chosen structure could be a good choice for applications where stiffness and lightness are important.The limitations of the research lie in its limited scope, focusing primarily on the effect of shape (octet-diagonal centred) and unit cell size on Young's modulus of PLA material. Other aspects of 3D printing, such as material selection and thermal properties, were not considered. Furthermore, the results obtained are specific to the printing parameters and experimental conditions chosen, which limits their generalizability to other 3D printing configurations or methods. However, these results have important implications for optimising the PLA printing process. They enable the identification of optimal parameters, such as unit cell shape and size, to produce stiffer, higher-quality structures. In addition, the research is helping to improve the mechanical properties of 3D-printed lattice parts, paving the way for more efficient manufacturing methods and stronger components.Our analysis can be used as a decision aid for the design of FDM lattice parts. Indeed, we can choose the diagonal structure of 6x6x6, which would provide favourable stiffness for functional parts.The paper explores the compression test of lattice structures using FDM technology, which presents a new direction for additive manufacturing. The study takes an experimental approach to evaluate the reliability of various additive manufacturing technologies for creating lattice structures. The study results provide insight into the most reliable technology for producing lattice structures.\",\"PeriodicalId\":14825,\"journal\":{\"name\":\"Journal of Achievements in Materials and Manufacturing Engineering\",\"volume\":\"27 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Achievements in Materials and Manufacturing Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5604/01.3001.0053.9491\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Achievements in Materials and Manufacturing Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5604/01.3001.0053.9491","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
Experimental investigation of mechanical stiffness in lattice structures fabricated with PLA using fused deposition modelling
The objective of the paper is to design and characterise with polylactic acid (PLA) material three cellular structures in the form of lattices which are diagonal-octet-centred shapes for two sizes 6x6x6 and 12x12x12 with a compression test to examine their stiffness using FDM technology compared to polyjet technology.The study used two analytical approaches to investigate lattice structures: experimental analysis and theoretical analysis. Experimental methods such as compression tests were conducted to determine the characteristics of lattice structures. In addition, theoretical analysis was conducted using Hook's law and Ashby's Gibson model to predict appropriate behaviour. The combination of experimental and theoretical methods provided a comprehensive understanding of lattice structures and their properties.The experimental study examined the impact of the shape and size of a lattice structure on the stiffness and lightness of objects 3D printed with FDM technology by PLA material. The research revealed that the 6x6x6 diagonal lattice structure size provided a good balance between stiffness and lightness. While the 6x6x6 byte structure was even lighter, with a mass ratio of 2.09 compared to the diagonal structure, it was less rigid, with a ratio of 0.43, making the diagonal structure more suitable for certain applications. The study highlights the importance of considering both the shape and size of the lattice structure when designing 3D-printed objects with specific mechanical properties; the chosen structure could be a good choice for applications where stiffness and lightness are important.The limitations of the research lie in its limited scope, focusing primarily on the effect of shape (octet-diagonal centred) and unit cell size on Young's modulus of PLA material. Other aspects of 3D printing, such as material selection and thermal properties, were not considered. Furthermore, the results obtained are specific to the printing parameters and experimental conditions chosen, which limits their generalizability to other 3D printing configurations or methods. However, these results have important implications for optimising the PLA printing process. They enable the identification of optimal parameters, such as unit cell shape and size, to produce stiffer, higher-quality structures. In addition, the research is helping to improve the mechanical properties of 3D-printed lattice parts, paving the way for more efficient manufacturing methods and stronger components.Our analysis can be used as a decision aid for the design of FDM lattice parts. Indeed, we can choose the diagonal structure of 6x6x6, which would provide favourable stiffness for functional parts.The paper explores the compression test of lattice structures using FDM technology, which presents a new direction for additive manufacturing. The study takes an experimental approach to evaluate the reliability of various additive manufacturing technologies for creating lattice structures. The study results provide insight into the most reliable technology for producing lattice structures.
期刊介绍:
The Journal of Achievements in Materials and Manufacturing Engineering has been published by the Association for Computational Materials Science and Surface Engineering in collaboration with the World Academy of Materials and Manufacturing Engineering WAMME and the Section Metallic Materials of the Committee of Materials Science of the Polish Academy of Sciences as a monthly. It has 12 points which was received during the evaluation by the Ministry of Science and Higher Education journals and ICV 2017:100 on the ICI Journals Master list announced by the Index Copernicus. It is a continuation of "Proceedings on Achievements in Mechanical and Materials Engineering" published in 1992-2005. Scope: Materials[...] Properties[...] Methodology of Research[...] Analysis and Modelling[...] Manufacturing and Processingv Biomedical and Dental Engineering and Materials[...] Cleaner Production[...] Industrial Mangement and Organisation [...] Education and Research Trends[...]