不同浇注温度对添加nb的SCH13A耐热铸钢渗碳组织和蠕变性能的影响

IF 0.5 4区 材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING Journal of The Japan Institute of Metals Pub Date : 2023-10-01 DOI:10.2320/jinstmet.j2023011
Tetsuya Okuyama, Ngo Huynh Kinh Luan, Masaki Kudo, Kuniaki Mizuno, Koreaki Koizumi
{"title":"不同浇注温度对添加nb的SCH13A耐热铸钢渗碳组织和蠕变性能的影响","authors":"Tetsuya Okuyama, Ngo Huynh Kinh Luan, Masaki Kudo, Kuniaki Mizuno, Koreaki Koizumi","doi":"10.2320/jinstmet.j2023011","DOIUrl":null,"url":null,"abstract":"The relationship between pouring temperature and carburized microstructure of 1%Nb-added SCH13A heat-resistant cast steel manufactured by the self-hardening mold casting process at pouring temperatures of 1753 K, 1823 K and 1883 K was investigated. The creep properties of these materials subjected to repeated carburizing and quenching treatment were also examined. As a result, with increasing pouring temperature, the carburized depth decreases and the carbon concentration distribution in the carburized layer increases. A relative comparison of the creep properties revealed that the volume of primary carbides and the number of voids and micro-cracks in carbides generated due to repeated vacuum carburizing quenching treatment affected the creep rupture time. Creep rupture time of the carburized specimens was shorter than that of the as-cast specimens. Additionally, pouring at 1823 K exhibits the longest rupture time among the samples poured at three different temperatures.","PeriodicalId":17337,"journal":{"name":"Journal of The Japan Institute of Metals","volume":null,"pages":null},"PeriodicalIF":0.5000,"publicationDate":"2023-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Changes in Carburized Microstructures and Creep Properties of Nb-Added SCH13A Heat-Resistant Cast Steel due to Different Pouring Temperatures\",\"authors\":\"Tetsuya Okuyama, Ngo Huynh Kinh Luan, Masaki Kudo, Kuniaki Mizuno, Koreaki Koizumi\",\"doi\":\"10.2320/jinstmet.j2023011\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The relationship between pouring temperature and carburized microstructure of 1%Nb-added SCH13A heat-resistant cast steel manufactured by the self-hardening mold casting process at pouring temperatures of 1753 K, 1823 K and 1883 K was investigated. The creep properties of these materials subjected to repeated carburizing and quenching treatment were also examined. As a result, with increasing pouring temperature, the carburized depth decreases and the carbon concentration distribution in the carburized layer increases. A relative comparison of the creep properties revealed that the volume of primary carbides and the number of voids and micro-cracks in carbides generated due to repeated vacuum carburizing quenching treatment affected the creep rupture time. Creep rupture time of the carburized specimens was shorter than that of the as-cast specimens. Additionally, pouring at 1823 K exhibits the longest rupture time among the samples poured at three different temperatures.\",\"PeriodicalId\":17337,\"journal\":{\"name\":\"Journal of The Japan Institute of Metals\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.5000,\"publicationDate\":\"2023-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of The Japan Institute of Metals\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2320/jinstmet.j2023011\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of The Japan Institute of Metals","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2320/jinstmet.j2023011","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

摘要

研究了浇铸温度分别为1753 K、1823 K和1883 K时,加入1% nb的自硬型铸造SCH13A耐热铸钢浇注温度与渗碳组织的关系。对这些材料经反复渗碳和淬火处理后的蠕变性能进行了研究。结果表明,随着浇注温度的升高,渗碳深度减小,渗碳层内碳浓度分布增大。对蠕变性能的相对比较表明,反复真空渗碳淬火产生的初生碳化物的体积以及碳化物中空洞和微裂纹的数量影响蠕变破裂时间。渗碳试样的蠕变断裂时间比铸态试样短。此外,在1823 K浇筑时,三种浇筑温度下试样的断裂时间最长。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Changes in Carburized Microstructures and Creep Properties of Nb-Added SCH13A Heat-Resistant Cast Steel due to Different Pouring Temperatures
The relationship between pouring temperature and carburized microstructure of 1%Nb-added SCH13A heat-resistant cast steel manufactured by the self-hardening mold casting process at pouring temperatures of 1753 K, 1823 K and 1883 K was investigated. The creep properties of these materials subjected to repeated carburizing and quenching treatment were also examined. As a result, with increasing pouring temperature, the carburized depth decreases and the carbon concentration distribution in the carburized layer increases. A relative comparison of the creep properties revealed that the volume of primary carbides and the number of voids and micro-cracks in carbides generated due to repeated vacuum carburizing quenching treatment affected the creep rupture time. Creep rupture time of the carburized specimens was shorter than that of the as-cast specimens. Additionally, pouring at 1823 K exhibits the longest rupture time among the samples poured at three different temperatures.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of The Japan Institute of Metals
Journal of The Japan Institute of Metals 工程技术-冶金工程
CiteScore
0.70
自引率
0.00%
发文量
27
审稿时长
6-12 weeks
期刊介绍: Information not localized
期刊最新文献
The Effect of Rhodium Addition on Degradation Behavior of Ir-10 mass%Rh Alloy during Oxidation at Elevated Temperatures Changes in Carburized Microstructures and Creep Properties of Nb-Added SCH13A Heat-Resistant Cast Steel due to Different Pouring Temperatures 高温プレスを利用した加工熱処理によるMg-9Al-1Zn-2Ca合金板の機械的特性向上 Ni基単結晶超合金TMS-238のデンドライト偏析とクリープ強度におよぼす溶体化熱処理の影響 Hydrogen and Materials Characteristic in Solids V
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1