悉尼盆地多段煤层原位含气量分析及煤与瓦斯突出治理

IF 6.9 1区 工程技术 Q2 ENERGY & FUELS International Journal of Coal Science & Technology Pub Date : 2023-10-01 DOI:10.1007/s40789-023-00614-4
Zhongbei Li, Ting Ren, Dennis Black, Ming Qiao, Itmam Abedin, Jessica Juric, Mike Wang
{"title":"悉尼盆地多段煤层原位含气量分析及煤与瓦斯突出治理","authors":"Zhongbei Li, Ting Ren, Dennis Black, Ming Qiao, Itmam Abedin, Jessica Juric, Mike Wang","doi":"10.1007/s40789-023-00614-4","DOIUrl":null,"url":null,"abstract":"Abstract The gas content is crucial for evaluating coal and gas outburst potential in underground coal mining. This study focuses on investigating the in-situ coal seam gas content and gas sorption capacity in a representative coal seam with multiple sections (A1, A2, and A3) in the Sydney basin, where the CO 2 composition exceeds 90%. The fast direct desorption method and associated devices were described in detail and employed to measure the in-situ gas components ( Q 1 , Q 2 , and Q 3 ) of the coal seam. The results show that in-situ total gas content ( Q T ) ranges from 9.48 m 3 /t for the A2 section to 14.80 m 3 /t for the A3 section, surpassing the Level 2 outburst threshold limit value, thereby necessitating gas drainage measures. Among the gas components, Q 2 demonstrates the highest contribution to Q T , ranging between 55% and 70%. Furthermore, high-pressure isothermal gas sorption experiments were conducted on coal samples from each seam section to explore their gas sorption capacity. The Langmuir model accurately characterizes CO 2 sorption behavior, with fit coefficients ( R 2 ) greater than 0.99. Strong positive correlations are observed between in-situ gas content and Langmuir volume, as well as between residual gas content ( Q 3 ) and sorption hysteresis. Notably, the A3 seam section is proved to have a higher outburst propensity due to its higher Q 1 and Q 2 gas contents, lower sorption hysteresis, and reduced coal toughness f value. The insights derived from the study can contribute to the development of effective gas management strategies and enhance the safety and efficiency of coal mining operations.","PeriodicalId":53469,"journal":{"name":"International Journal of Coal Science & Technology","volume":"23 1","pages":"0"},"PeriodicalIF":6.9000,"publicationDate":"2023-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"In-situ gas contents of a multi-section coal seam in Sydney basin for coal and gas outburst management\",\"authors\":\"Zhongbei Li, Ting Ren, Dennis Black, Ming Qiao, Itmam Abedin, Jessica Juric, Mike Wang\",\"doi\":\"10.1007/s40789-023-00614-4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract The gas content is crucial for evaluating coal and gas outburst potential in underground coal mining. This study focuses on investigating the in-situ coal seam gas content and gas sorption capacity in a representative coal seam with multiple sections (A1, A2, and A3) in the Sydney basin, where the CO 2 composition exceeds 90%. The fast direct desorption method and associated devices were described in detail and employed to measure the in-situ gas components ( Q 1 , Q 2 , and Q 3 ) of the coal seam. The results show that in-situ total gas content ( Q T ) ranges from 9.48 m 3 /t for the A2 section to 14.80 m 3 /t for the A3 section, surpassing the Level 2 outburst threshold limit value, thereby necessitating gas drainage measures. Among the gas components, Q 2 demonstrates the highest contribution to Q T , ranging between 55% and 70%. Furthermore, high-pressure isothermal gas sorption experiments were conducted on coal samples from each seam section to explore their gas sorption capacity. The Langmuir model accurately characterizes CO 2 sorption behavior, with fit coefficients ( R 2 ) greater than 0.99. Strong positive correlations are observed between in-situ gas content and Langmuir volume, as well as between residual gas content ( Q 3 ) and sorption hysteresis. Notably, the A3 seam section is proved to have a higher outburst propensity due to its higher Q 1 and Q 2 gas contents, lower sorption hysteresis, and reduced coal toughness f value. The insights derived from the study can contribute to the development of effective gas management strategies and enhance the safety and efficiency of coal mining operations.\",\"PeriodicalId\":53469,\"journal\":{\"name\":\"International Journal of Coal Science & Technology\",\"volume\":\"23 1\",\"pages\":\"0\"},\"PeriodicalIF\":6.9000,\"publicationDate\":\"2023-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Coal Science & Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1007/s40789-023-00614-4\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Coal Science & Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1007/s40789-023-00614-4","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

摘要

矿井瓦斯含量是评价煤与瓦斯突出潜力的关键。本研究重点研究了悉尼盆地具有代表性的A1、A2、A3多段煤层(CO 2成分超过90%)的煤层原煤含气量及瓦斯吸附能力。详细介绍了快速直接解吸法及其配套装置,并应用该方法对煤层中煤层气组分(q1、q2、q3)进行了原位测定。结果表明:A2段现场总含气量(Q T)为9.48 m 3 / T ~ A3段为14.80 m 3 / T,超过了2级突出阈值限值,需要采取抽放瓦斯措施;在气体组分中,q2对Q - T的贡献最大,在55% ~ 70%之间。在此基础上,对各煤层段煤样进行了高压等温气体吸附实验,探索煤样的气体吸附能力。Langmuir模型准确地描述了co2的吸附行为,拟合系数(r2)大于0.99。原位气体含量与Langmuir体积、残余气体含量(q3)与吸附滞回率呈显著正相关。值得注意的是,A3煤层区段q1和q2气体含量较高,吸附滞后较低,煤韧性f值较低,因此具有较高的突出倾向。从研究中获得的见解有助于制定有效的气体管理战略,提高煤矿开采作业的安全性和效率。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
In-situ gas contents of a multi-section coal seam in Sydney basin for coal and gas outburst management
Abstract The gas content is crucial for evaluating coal and gas outburst potential in underground coal mining. This study focuses on investigating the in-situ coal seam gas content and gas sorption capacity in a representative coal seam with multiple sections (A1, A2, and A3) in the Sydney basin, where the CO 2 composition exceeds 90%. The fast direct desorption method and associated devices were described in detail and employed to measure the in-situ gas components ( Q 1 , Q 2 , and Q 3 ) of the coal seam. The results show that in-situ total gas content ( Q T ) ranges from 9.48 m 3 /t for the A2 section to 14.80 m 3 /t for the A3 section, surpassing the Level 2 outburst threshold limit value, thereby necessitating gas drainage measures. Among the gas components, Q 2 demonstrates the highest contribution to Q T , ranging between 55% and 70%. Furthermore, high-pressure isothermal gas sorption experiments were conducted on coal samples from each seam section to explore their gas sorption capacity. The Langmuir model accurately characterizes CO 2 sorption behavior, with fit coefficients ( R 2 ) greater than 0.99. Strong positive correlations are observed between in-situ gas content and Langmuir volume, as well as between residual gas content ( Q 3 ) and sorption hysteresis. Notably, the A3 seam section is proved to have a higher outburst propensity due to its higher Q 1 and Q 2 gas contents, lower sorption hysteresis, and reduced coal toughness f value. The insights derived from the study can contribute to the development of effective gas management strategies and enhance the safety and efficiency of coal mining operations.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
11.40
自引率
8.40%
发文量
678
审稿时长
12 weeks
期刊介绍: The International Journal of Coal Science & Technology is a peer-reviewed open access journal that focuses on key topics of coal scientific research and mining development. It serves as a forum for scientists to present research findings and discuss challenging issues in the field. The journal covers a range of topics including coal geology, geochemistry, geophysics, mineralogy, and petrology. It also covers coal mining theory, technology, and engineering, as well as coal processing, utilization, and conversion. Additionally, the journal explores coal mining environment and reclamation, along with related aspects. The International Journal of Coal Science & Technology is published with China Coal Society, who also cover the publication costs. This means that authors do not need to pay an article-processing charge.
期刊最新文献
Coal ash resources and potential for rare earth element production in the United States Ecological environment quality assessment of coal mining cities based on GEE platform: A case study of Shuozhou, China Study on signal characteristics of burst tendency coal under different loading rates Image-based quantitative probing of 3D heterogeneous pore structure in CBM reservoir and permeability estimation with pore network modeling Spectral signatures of solvent-extracted macromolecules in Indian coals of different rank: Insights from fluorescence excitation-emission matrix
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1