{"title":"模拟气流通过气动阀:简要回顾与实验案例研究","authors":"Gustavo Koury Costa","doi":"10.3390/eng4040149","DOIUrl":null,"url":null,"abstract":"Compressible flow models are commonly used for describing air flow through pneumatic valves. Because of the difficulties in predicting viscous losses, these models ultimately rely on experimental determination of coefficients. Different equations have been proposed for different fluid speeds, having the sonic fluid velocity as a reference mark. However, one might question whether a much simpler approach, where the fluid is considered as incompressible, would still give good results within the typical range of industrial applications. Moreover, practically all models presuppose that the valve output pressure decreases in time, as in a discharge process. This paper reviews some representative one-dimensional compressible flow models and discusses the appropriateness of using equations based solely on discharging flows. Two experimental circuits, where an air reservoir is pressurized and, subsequently, decompressed, are used for comparison between different flow models. It is shown that a simpler set of equations still produces acceptable results for practical pneumatic applications.","PeriodicalId":10630,"journal":{"name":"Comput. Chem. Eng.","volume":"177 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Modelling Air Flow through Pneumatic Valves: A Brief Review with an Experimental Case Study\",\"authors\":\"Gustavo Koury Costa\",\"doi\":\"10.3390/eng4040149\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Compressible flow models are commonly used for describing air flow through pneumatic valves. Because of the difficulties in predicting viscous losses, these models ultimately rely on experimental determination of coefficients. Different equations have been proposed for different fluid speeds, having the sonic fluid velocity as a reference mark. However, one might question whether a much simpler approach, where the fluid is considered as incompressible, would still give good results within the typical range of industrial applications. Moreover, practically all models presuppose that the valve output pressure decreases in time, as in a discharge process. This paper reviews some representative one-dimensional compressible flow models and discusses the appropriateness of using equations based solely on discharging flows. Two experimental circuits, where an air reservoir is pressurized and, subsequently, decompressed, are used for comparison between different flow models. It is shown that a simpler set of equations still produces acceptable results for practical pneumatic applications.\",\"PeriodicalId\":10630,\"journal\":{\"name\":\"Comput. Chem. Eng.\",\"volume\":\"177 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-10-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Comput. Chem. Eng.\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3390/eng4040149\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Comput. Chem. Eng.","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/eng4040149","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Modelling Air Flow through Pneumatic Valves: A Brief Review with an Experimental Case Study
Compressible flow models are commonly used for describing air flow through pneumatic valves. Because of the difficulties in predicting viscous losses, these models ultimately rely on experimental determination of coefficients. Different equations have been proposed for different fluid speeds, having the sonic fluid velocity as a reference mark. However, one might question whether a much simpler approach, where the fluid is considered as incompressible, would still give good results within the typical range of industrial applications. Moreover, practically all models presuppose that the valve output pressure decreases in time, as in a discharge process. This paper reviews some representative one-dimensional compressible flow models and discusses the appropriateness of using equations based solely on discharging flows. Two experimental circuits, where an air reservoir is pressurized and, subsequently, decompressed, are used for comparison between different flow models. It is shown that a simpler set of equations still produces acceptable results for practical pneumatic applications.