在低共晶溶剂中电沉积的 Ag-Ni-Co 合金的微观结构和腐蚀特性研究

IF 1.1 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Corrosion Pub Date : 2023-12-20 DOI:10.5006/4475
Bowen Li, Fengze Pan, Chengyu Pan, Tianyi Lv, Xiaotian Wang, Xiang Ju, Kaifei Gong, Wenkai Zou, Chuanbo Zheng
{"title":"在低共晶溶剂中电沉积的 Ag-Ni-Co 合金的微观结构和腐蚀特性研究","authors":"Bowen Li, Fengze Pan, Chengyu Pan, Tianyi Lv, Xiaotian Wang, Xiang Ju, Kaifei Gong, Wenkai Zou, Chuanbo Zheng","doi":"10.5006/4475","DOIUrl":null,"url":null,"abstract":"\n The Ag-Ni-Co alloy coating is prepared in the low eutectic solvent system by pulsed power supply technology. Infrared spectroscopy and cyclic voltammetry are used to confirm that the addition of metal salts do not change the low eutectic solvent system. When the current density is 1A/dm2 and the plating time is 40min, the plating grain is mainly spherical; the coating is uniform and dense. After testing, the surface specific resistance of the plating is only 1.295mΩ·cm2, the microhardness reaches 214.8HV, and the wear rate reaches 3.1. The corrosion resistance of the plating and the substrate is analyzed by a combination of macroscopic electrochemistry and micro-area electrochemistry, and the results show that the corrosion potential of the plating reaches -0.141V, and the corrosion current density reaches 1.299×10-7 A/cm2. The corrosion resistance of the plating is much greater than that of the substrate.","PeriodicalId":10717,"journal":{"name":"Corrosion","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study on microstructure and corrosion properties of Ag-Ni-Co alloy electrodeposited in low eutectic solvent\",\"authors\":\"Bowen Li, Fengze Pan, Chengyu Pan, Tianyi Lv, Xiaotian Wang, Xiang Ju, Kaifei Gong, Wenkai Zou, Chuanbo Zheng\",\"doi\":\"10.5006/4475\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n The Ag-Ni-Co alloy coating is prepared in the low eutectic solvent system by pulsed power supply technology. Infrared spectroscopy and cyclic voltammetry are used to confirm that the addition of metal salts do not change the low eutectic solvent system. When the current density is 1A/dm2 and the plating time is 40min, the plating grain is mainly spherical; the coating is uniform and dense. After testing, the surface specific resistance of the plating is only 1.295mΩ·cm2, the microhardness reaches 214.8HV, and the wear rate reaches 3.1. The corrosion resistance of the plating and the substrate is analyzed by a combination of macroscopic electrochemistry and micro-area electrochemistry, and the results show that the corrosion potential of the plating reaches -0.141V, and the corrosion current density reaches 1.299×10-7 A/cm2. The corrosion resistance of the plating is much greater than that of the substrate.\",\"PeriodicalId\":10717,\"journal\":{\"name\":\"Corrosion\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-12-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Corrosion\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.5006/4475\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Corrosion","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.5006/4475","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

利用脉冲电源技术在低共晶溶剂体系中制备 Ag-Ni-Co 合金涂层。红外光谱和循环伏安法证实金属盐的加入不会改变低共晶溶剂体系。当电流密度为 1A/dm2、电镀时间为 40min 时,镀层晶粒以球形为主,镀层均匀致密。经测试,镀层表面比电阻仅为 1.295mΩ-cm2,显微硬度达到 214.8HV,磨损率达到 3.1。采用宏观电化学和微区电化学相结合的方法分析了镀层和基体的耐腐蚀性能,结果表明镀层的腐蚀电位达到-0.141V,腐蚀电流密度达到 1.299×10-7 A/cm2。镀层的耐腐蚀性远高于基体。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Study on microstructure and corrosion properties of Ag-Ni-Co alloy electrodeposited in low eutectic solvent
The Ag-Ni-Co alloy coating is prepared in the low eutectic solvent system by pulsed power supply technology. Infrared spectroscopy and cyclic voltammetry are used to confirm that the addition of metal salts do not change the low eutectic solvent system. When the current density is 1A/dm2 and the plating time is 40min, the plating grain is mainly spherical; the coating is uniform and dense. After testing, the surface specific resistance of the plating is only 1.295mΩ·cm2, the microhardness reaches 214.8HV, and the wear rate reaches 3.1. The corrosion resistance of the plating and the substrate is analyzed by a combination of macroscopic electrochemistry and micro-area electrochemistry, and the results show that the corrosion potential of the plating reaches -0.141V, and the corrosion current density reaches 1.299×10-7 A/cm2. The corrosion resistance of the plating is much greater than that of the substrate.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Corrosion
Corrosion MATERIALS SCIENCE, MULTIDISCIPLINARY-METALLURGY & METALLURGICAL ENGINEERING
CiteScore
2.80
自引率
12.50%
发文量
97
审稿时长
3 months
期刊介绍: CORROSION is the premier research journal featuring peer-reviewed technical articles from the world’s top researchers and provides a permanent record of progress in the science and technology of corrosion prevention and control. The scope of the journal includes the latest developments in areas of corrosion metallurgy, mechanisms, predictors, cracking (sulfide stress, stress corrosion, hydrogen-induced), passivation, and CO2 corrosion. 70+ years and over 7,100 peer-reviewed articles with advances in corrosion science and engineering have been published in CORROSION. The journal publishes seven article types – original articles, invited critical reviews, technical notes, corrosion communications fast-tracked for rapid publication, special research topic issues, research letters of yearly annual conference student poster sessions, and scientific investigations of field corrosion processes. CORROSION, the Journal of Science and Engineering, serves as an important communication platform for academics, researchers, technical libraries, and universities. Articles considered for CORROSION should have significant permanent value and should accomplish at least one of the following objectives: • Contribute awareness of corrosion phenomena, • Advance understanding of fundamental process, and/or • Further the knowledge of techniques and practices used to reduce corrosion.
期刊最新文献
Implications of grout condition on galvanic coupling and hydrogen absorption within post-tensioned bridge tendons constructed with galvanized steel ducts Bimodal trending in corrosion loss of magnesium alloys Corrosion behavior of Cu-Ni-Fe-Mn-Cr alloy in 3.5 wt.% NaCl solution An Investigation of Corrosion Behaviors of Thermally Sprayed Aluminum (TSA) at Elevated Temperatures Under Thermal Insulations and Autoclave Immersion Conditions A stochastic modeling method for three-dimensional corrosion pits of bridge cable wires and its application
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1