Arif Tjahjono, Nadya Salsabila Frendyta, P. A. Paristiawan
{"title":"双固溶体处理对奥氏体锰钢微观结构变化的影响","authors":"Arif Tjahjono, Nadya Salsabila Frendyta, P. A. Paristiawan","doi":"10.12982/cmjs.2023.060","DOIUrl":null,"url":null,"abstract":"R esearch has been carried out to eliminate of the carbide phase (FeMn)3C at the grain boundaries through a double solution treatment. The process begins, which is heating the steel to a temperature of 1000°C with a holding time of 100 minutes, then hot rolling is carried out by 28%. Furthermore, the steel reheated from room temperature to 1100°C with a holding time of 20 minutes, followed by a double solution treatment process, which is heating the steel gradually from room temperature to 730°C with a holding time of 30 minutes, then heating is continued to a temperature of 1000°C with a holding time of 15 minutes, and quenching by water. SEM mapping shows steel contains Fe, Mn, C, S, Si and Ni elements. XRD characterization showed that the double solution treatment process did not change the constituent phases in the form of Fe3O4, γ-Mn, γ-Fe, α-Fe and MnO2, but reduce the crystalline size from 0.0247 to 0.0223 μm. Based on optical microscope and SEM observations, it can be seen that the double solution treatment process was also able to reduce the grain size from 5.33 to 1.30 μm and remove the carbide (FeMn)3C phase at the grain boundaries, as well as successfully change the morphology from cleavage areas to dimple areas.","PeriodicalId":9884,"journal":{"name":"Chiang Mai Journal of Science","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2023-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The Effect of Double Solution Treatment on Changes in the Microstructure of Austenitic Manganese Steel\",\"authors\":\"Arif Tjahjono, Nadya Salsabila Frendyta, P. A. Paristiawan\",\"doi\":\"10.12982/cmjs.2023.060\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"R esearch has been carried out to eliminate of the carbide phase (FeMn)3C at the grain boundaries through a double solution treatment. The process begins, which is heating the steel to a temperature of 1000°C with a holding time of 100 minutes, then hot rolling is carried out by 28%. Furthermore, the steel reheated from room temperature to 1100°C with a holding time of 20 minutes, followed by a double solution treatment process, which is heating the steel gradually from room temperature to 730°C with a holding time of 30 minutes, then heating is continued to a temperature of 1000°C with a holding time of 15 minutes, and quenching by water. SEM mapping shows steel contains Fe, Mn, C, S, Si and Ni elements. XRD characterization showed that the double solution treatment process did not change the constituent phases in the form of Fe3O4, γ-Mn, γ-Fe, α-Fe and MnO2, but reduce the crystalline size from 0.0247 to 0.0223 μm. Based on optical microscope and SEM observations, it can be seen that the double solution treatment process was also able to reduce the grain size from 5.33 to 1.30 μm and remove the carbide (FeMn)3C phase at the grain boundaries, as well as successfully change the morphology from cleavage areas to dimple areas.\",\"PeriodicalId\":9884,\"journal\":{\"name\":\"Chiang Mai Journal of Science\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2023-11-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Chiang Mai Journal of Science\",\"FirstCategoryId\":\"103\",\"ListUrlMain\":\"https://doi.org/10.12982/cmjs.2023.060\",\"RegionNum\":4,\"RegionCategory\":\"综合性期刊\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MULTIDISCIPLINARY SCIENCES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chiang Mai Journal of Science","FirstCategoryId":"103","ListUrlMain":"https://doi.org/10.12982/cmjs.2023.060","RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MULTIDISCIPLINARY SCIENCES","Score":null,"Total":0}
The Effect of Double Solution Treatment on Changes in the Microstructure of Austenitic Manganese Steel
R esearch has been carried out to eliminate of the carbide phase (FeMn)3C at the grain boundaries through a double solution treatment. The process begins, which is heating the steel to a temperature of 1000°C with a holding time of 100 minutes, then hot rolling is carried out by 28%. Furthermore, the steel reheated from room temperature to 1100°C with a holding time of 20 minutes, followed by a double solution treatment process, which is heating the steel gradually from room temperature to 730°C with a holding time of 30 minutes, then heating is continued to a temperature of 1000°C with a holding time of 15 minutes, and quenching by water. SEM mapping shows steel contains Fe, Mn, C, S, Si and Ni elements. XRD characterization showed that the double solution treatment process did not change the constituent phases in the form of Fe3O4, γ-Mn, γ-Fe, α-Fe and MnO2, but reduce the crystalline size from 0.0247 to 0.0223 μm. Based on optical microscope and SEM observations, it can be seen that the double solution treatment process was also able to reduce the grain size from 5.33 to 1.30 μm and remove the carbide (FeMn)3C phase at the grain boundaries, as well as successfully change the morphology from cleavage areas to dimple areas.
期刊介绍:
The Chiang Mai Journal of Science is an international English language peer-reviewed journal which is published in open access electronic format 6 times a year in January, March, May, July, September and November by the Faculty of Science, Chiang Mai University. Manuscripts in most areas of science are welcomed except in areas such as agriculture, engineering and medical science which are outside the scope of the Journal. Currently, we focus on manuscripts in biology, chemistry, physics, materials science and environmental science. Papers in mathematics statistics and computer science are also included but should be of an applied nature rather than purely theoretical. Manuscripts describing experiments on humans or animals are required to provide proof that all experiments have been carried out according to the ethical regulations of the respective institutional and/or governmental authorities and this should be clearly stated in the manuscript itself. The Editor reserves the right to reject manuscripts that fail to do so.